# FS: Millermatic 135 MIG
**URL:** https://forums.speedlife.net/t/fs-millermatic-135-mig/17630
**Category:** Classifieds
**Created:** [September 18, 2006, 11:49am UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630 "2006-09-18T11:49:52Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 18, 2006, 11:49am UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/1 "2006-09-18T11:49:52Z")
> The Millermatic® 135 is perfect for light fabrication, garage/body shops, auto body, and at home. It welds material 24 gauge to 3/16 inch. This all-in-one MIG machine has infinite voltage control with wire feed speed tracking for easy operator control. Runs on 115 Volt input power to go wherever you need to weld!
MORE INFO -\> [http://www.millerwelds.com/products/mig/millermatic\_135/](http://www.millerwelds.com/products/mig/millermatic_135/)
- will include 40 cu.ft C25 cylinder filled
- also includes Miller cover
- will include spool of flux core wire
- machine is like brand new
- will show you how to setup and use the machine
$800 + TAX new
$550.00 or BO
---
### Author:  [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)
#### Post date: [September 18, 2006, 11:54am UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/2 "2006-09-18T11:54:45Z")
ehhhhhhhhhhhhhhhhhh…i only had 550…
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [September 18, 2006, 1:50pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/3 "2006-09-18T13:50:16Z")
soooooo you suggested in my wtb thread earlier that u were thinking 350, and now u post it for sale for 550, cool
my best offer is 350
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 18, 2006, 2:58pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/4 "2006-09-18T14:58:01Z")
> [@boardjnky4](#):
>
> soooooo you suggested in my wtb thread earlier that u were thinking 350, and now u post it for sale for 550, cool
>
> my best offer is 350
Yeah $350 for the welder itself. However when I thought about it what would I do with the running gear and gas cylinder once the welder is gone. It makes no sense for me to split it up. The cylinder is over $100 new without gas and the running gear is around $100 also. So my price of $550 is more than fair for a machine that would cost you $870 today
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [September 18, 2006, 3:13pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/5 "2006-09-18T15:13:20Z")
what is the “running gear” consist of?
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 18, 2006, 3:45pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/6 "2006-09-18T15:45:08Z")
> [@boardjnky4](#):
>
> what is the “running gear” consist of?
Cart with cylinder rack so you can easily move the welder around the shop
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [September 18, 2006, 3:58pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/7 "2006-09-18T15:58:52Z")
you got stop spending, cuz ur wife will be taking it all in 2 weeks :lol:
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [September 18, 2006, 4:00pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/8 "2006-09-18T16:00:26Z")
well, like i said, ill give ya 350 if u want to seperate it.
hell you can prolly get good money for that other stuff on ebay
---
### Author:  [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)
#### Post date: [September 18, 2006, 4:12pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/9 "2006-09-18T16:12:21Z")
so this is a gasless? 110 or 220v?
---
### Author:  [@tnick24](https://forums.speedlife.net/u/tnick24)
#### Post date: [September 18, 2006, 4:25pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/10 "2006-09-18T16:25:25Z")
> [@focusinprogress](#):
>
> so this is a gasless? 110 or 220v?
… did you even read ANYTHING in the original post?
---
### Author:  [@Firehawk853](https://forums.speedlife.net/u/Firehawk853)
#### Post date: [September 18, 2006, 7:28pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/11 "2006-09-18T19:28:38Z")
> [@focusinprogress](#):
>
> so this is a gasless? 110 or 220v?
gas or gasless it will do both. 110v
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [September 18, 2006, 8:47pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/12 "2006-09-18T20:47:34Z")
How about $400 for all? I was just talking about agetting a welder today. Leta a nigga know.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 18, 2006, 9:47pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/13 "2006-09-18T21:47:18Z")
> [@JDMSIR](#):
>
> How about $400 for all? I was just talking about agetting a welder today. Leta a nigga know.
Sorry won’t go that low for a machine that has low hours and looks brand new.
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [September 18, 2006, 9:52pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/14 "2006-09-18T21:52:18Z")
> [@J&J](#):
>
> Sorry won’t go that low for a machine that has low hours and looks brand new.
Well keep me in mind, i have the Cash.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 20, 2006, 11:53am UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/15 "2006-09-20T11:53:39Z")
Someone must need a like new top-o-the-line welder. I will even throw in some extra wire, tips and scrap metal
---
### Author:  [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)
#### Post date: [September 20, 2006, 11:55am UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/16 "2006-09-20T11:55:03Z")
sent link to friend looking for welder…
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [September 20, 2006, 12:15pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/17 "2006-09-20T12:15:00Z")
im def. still on the hook if ur willing to seperate
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [September 20, 2006, 12:40pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/18 "2006-09-20T12:40:27Z")
$450?
---
### Author:  [@Paulo](https://forums.speedlife.net/u/Paulo)
#### Post date: [September 20, 2006, 8:38pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/19 "2006-09-20T20:38:53Z")
fuck, i want it, i have the money for it… but i don’t think i should buy it now. cuz i won’t even use it till next may and i can use the $$ for other things.
boooooo
i’ll talk to my dad and see if he wants to split it with me
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 22, 2006, 9:27pm UTC](https://forums.speedlife.net/t/fs-millermatic-135-mig/17630/20 "2006-09-22T21:27:47Z")
> [@93z24](#):
>
> fuck, i want it, i have the money for it… but i don’t think i should buy it now. cuz i won’t even use it till next may and i can use the $$ for other things.
>
> boooooo
>
> i’ll talk to my dad and see if he wants to split it with me
Don’t worry I let it sit a lot and it doesn’t go bad like Milk