# FS: MOMO Corse Steering Wheel and Z32 MAF w/pigtail and more 2 come **URL:** \ **Category:** Classifieds\ **Created:** [February 20, 2010, 3:37pm UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611 "2010-02-20T15:37:41Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![rmallari](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@rmallari](https://forums.speedlife.net/u/rmallari)\ **Post date:** [February 20, 2010, 3:37pm UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/1 "2010-02-20T15:37:41Z")
MOMO Corse Steering Wheel 350mm red stitching comes with horn button and ring around horn button $100 OBO ring around horn button not in picture leather has separated on the right spoke area ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101249.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101249.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101247.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101247.jpg) Z32 MAF with pigtail bought it from bajansr (nick) but never got to install it or use it yet has worked perfectly for him with his buddy’s ka-t $150 FIRM ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101250.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101250.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101252.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101252.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101253.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101253.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101254.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101254.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101255.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/200220101255.jpg) Also selling a JDM 5Zigen 2.5inch Catback Exhaust for S13. I think its a 5Zigen Fire/Fireball but the tip is longer than what i’ve seen of pics online. It sticks out further than stock bumper and is angled, and 2.5inch piping is good for NA setups/stock motor. Its got a few dents but not noticeable when on car. pics will be up soon and maybe a video if i can find it $250 OBO Will be putting up my current exhaust for sale once I remove it Its a 3inch Full Stainless Steel Tanabe Catback Exhaust for S13 (2piece) has scrapes on the bottom but doest leak. $250 OBO pics are how it looked like after i cleaned and polished it up in the summer, i will clean it again when i remove it. ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/22042009877.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/22042009877.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/22042009876.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/22042009876.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009870.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009870.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009867.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009867.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009866.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009866.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009865.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009865.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009864.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/20042009864.jpg) video of tanabe exhaust: [![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/th_22042009156.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/th_22042009156.jpg)](http://s110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/?action=view¤t=22042009156.flv) [![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/th_21042009155.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/th_21042009155.jpg)](http://s110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/?action=view¤t=21042009155.flv) oh, here is a side by side pic with the 5zigen exhaust ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009874.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009874.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009873.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009873.jpg) ![http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009872.jpg](http://i110.photobucket.com/albums/n107/rmallari/tanabe%20exhaust/21042009872.jpg) May also be considering selling my SARD TCV (torque control valve), its an alternative to a straight/test pipe, i believe its also quieter than a test pipe. has a few scrapes on bottom as well, has a port for an egt sensor and is also rebuildable/take it apart and clean. ![http://i110.photobucket.com/albums/n107/rmallari/TCV.jpg](http://i110.photobucket.com/albums/n107/rmallari/TCV.jpg) read more on it here: [http://www.rhdjapan.com/sard-tcv-torque-control-valve-nissan-17070](http://www.rhdjapan.com/sard-tcv-torque-control-valve-nissan-17070) > **[Anthony Grove – Medium](https://medium.com/@anthonygrove)** > > Read writing from Anthony Grove on Medium. SEATTLE | FRIENDS - HIKING - TRAVEL - STARTUPS. Every day, Anthony Grove and thousands of other voices read, write, and share important stories on Medium. It will give you the same power as a straight pipe at full throttle while having better torque, pickup and response from idle and at low RPMs. only thing that annoys me is a kind of rattle (some ppl thing ur exhaust is broken) usually when cold starting and idle is at 1500rpm and sometimes between 1k-2k rpm but who cares if you have a loud exhaust already. or maybe cleaning it out and tightening the insides will fix the rattle but i havent gotten into doing that $100 FIRM ---
**Author:** ![rmallari](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@rmallari](https://forums.speedlife.net/u/rmallari)\ **Post date:** [February 22, 2010, 1:24pm UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/2 "2010-02-22T13:24:56Z")
MOMO wheel is gone IC: OMP Corsica Steering Wheel 350MM deep dish SUEDE with Red Stitching $140 OBO ![http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/220220101256.jpg](http://i110.photobucket.com/albums/n107/rmallari/stuff%20to%20sell/220220101256.jpg) also adding a brand new still in packaging Nismo Powerbrace for S13 comes with nismo sticker and japanese instruction/specs paper $150 OBO ![http://www.enjukuracing.com/images/nismopowerbrace_full.gif](http://www.enjukuracing.com/images/nismopowerbrace_full.gif) (copied from google images) and i’ll drop the price on the Z32 MAF w/pigtail to $100FIRM until wednesday I need money asap ---
**Author:** ![rmallari](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@rmallari](https://forums.speedlife.net/u/rmallari)\ **Post date:** [February 23, 2010, 12:26am UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/3 "2010-02-23T00:26:33Z")
Z32 MAF w/pigtail SOLD also, tanabe 3inch exhaust is off the car and up for sale. ---
**Author:** ![eftuner777](https://avatars.discourse-cdn.com/v4/letter/e/278dde/32.png) [@eftuner777](https://forums.speedlife.net/u/eftuner777)\ **Post date:** [February 23, 2010, 3:39pm UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/4 "2010-02-23T15:39:27Z")
Thats a replica omp wheel. ---
**Author:** ![rmallari](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@rmallari](https://forums.speedlife.net/u/rmallari)\ **Post date:** [February 23, 2010, 10:17pm UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/5 "2010-02-23T22:17:41Z")
replica or not, (got it in a trade so i dunno)…OMP steering wheel sold by tha way, you got a link to show me how/where/why they are replica? i wanna kno for next time. pm it 2 me plz, ill b searchin on google aswell ---
**Author:** ![Kengi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kengi/32/5575_2.png) [@Kengi](https://forums.speedlife.net/u/Kengi)\ **Post date:** [February 24, 2010, 10:02am UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/6 "2010-02-24T10:02:23Z")
Any wheel costing less than 200 brand new these days are not real… lol just so you know. Lots of copies around ---
**Author:** ![DarkManX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/darkmanx/32/5569_2.png) [@DarkManX](https://forums.speedlife.net/u/DarkManX)\ **Post date:** [February 24, 2010, 10:13am UTC](https://forums.speedlife.net/t/fs-momo-corse-steering-wheel-and-z32-maf-w-pigtail-and-more-2-come/131611/7 "2010-02-24T10:13:58Z")
sell me your br rev limiter 🙂 those are super rare to find here