# FS: Mustang Steeda Subframe Connectors..ect ect **URL:** \ **Category:** Classifieds\ **Created:** [October 8, 2008, 6:53pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155 "2008-10-08T18:53:50Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [October 8, 2008, 6:53pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/1 "2008-10-08T18:53:50Z")
**[LEFT]There brand new and i just wanna make my money back thats all ill take 130** [http://www.steeda.com/products/full\_length\_subframe\_connectors.php](http://www.steeda.com/products/full_length_subframe_connectors.php) ![http://www.steeda.com/images/flsfc400.jpg](http://www.steeda.com/images/flsfc400.jpg) Steeda Full length subframe connectors have been improved with a new one-piece reinforced cross brace. Some subframe cross braces have 8 individual gussets which must be carefully positioned and welded on. Still other kits use no reinforcements at all. Steeda cross braces now have reinforcing gussets built-in, for greater strength with less welding. These true full-length connectors run the entire length of the floor pan for increased chassis rigidity, better handling and improved ride. The beefy 1.25 by 2 inch connectors are perfect for serious cars with high horsepower, sticky tires or competition suspension. They are reinforced at each bend and include Steeda’s exclusive torque box reinforcing plate for a stronger attachment to the rear subframe. Full-length subframe connectors are available in bare steel or zinc plated finish. The zinc plating can be welded over, and then only the weld joints need to be spray-painted vs. the whole kit needing to be spray-painted. **I also have a brand new Drive shaft loop that i want 25 bucks out of** Enlarge Image DRIVE SHAFT SAFETY LOOP-MUSTANGS Specifically designed to fit 1979-03 Ford Mustangs. Easy bolt on installation without modifications. Both NHRA & IHRA legal. Made from 1/4" thick zinc plated steel. Complete with mounting hardware and instructions. Replaces #18015. [/LEFT] ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [October 9, 2008, 12:00pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/2 "2008-10-09T12:00:22Z")
Bump I know some certain mustangs need these out there ---
**Author:** ![threefifftys10](https://avatars.discourse-cdn.com/v4/letter/t/7feea3/32.png) [@threefifftys10](https://forums.speedlife.net/u/threefifftys10)\ **Post date:** [October 10, 2008, 7:32am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/3 "2008-10-10T07:32:19Z")
bump good seller !!! ---
**Author:** ![Red99GTVert](https://avatars.discourse-cdn.com/v4/letter/r/7ea924/32.png) [@Red99GTVert](https://forums.speedlife.net/u/Red99GTVert)\ **Post date:** [October 11, 2008, 11:41am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/4 "2008-10-11T11:41:00Z")
Might be interested in the SFC’s. Are they the bare steel version, or zinc coated? ---
**Author:** ![strokedlx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/strokedlx/32/7220_2.png) [@strokedlx](https://forums.speedlife.net/u/strokedlx)\ **Post date:** [October 11, 2008, 4:30pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/5 "2008-10-11T16:30:33Z")
Is the DS loop fit larger driveshafts? I need one to fit a FMS 4" DS. ---
**Author:** ![1991LX5.0](https://avatars.discourse-cdn.com/v4/letter/1/5f9b8f/32.png) [@1991LX5.0](https://forums.speedlife.net/u/1991LX5.0)\ **Post date:** [October 12, 2008, 4:49pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/6 "2008-10-12T16:49:50Z")
i will take the DS loop if strokedlx doesnt take it ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [October 12, 2008, 5:21pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/7 "2008-10-12T17:21:57Z")
:tup: nice parts. ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [October 13, 2008, 5:57am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/8 "2008-10-13T05:57:44Z")
> [@1991LX5.0](#): > > i will take the DS loop if strokedlx doesnt take it well i still havent heard nothing from him so ill pm u my number ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [October 16, 2008, 7:56am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/9 "2008-10-16T07:56:23Z")
drive shaft loop sold!!! ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [October 16, 2008, 8:01am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/10 "2008-10-16T08:01:10Z")
YAY! ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [October 24, 2008, 6:12am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/11 "2008-10-24T06:12:42Z")
bump ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [November 24, 2008, 7:20pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/12 "2008-11-24T19:20:32Z")
smack that ass! ---
**Author:** ![threefifftys10](https://avatars.discourse-cdn.com/v4/letter/t/7feea3/32.png) [@threefifftys10](https://forums.speedlife.net/u/threefifftys10)\ **Post date:** [November 27, 2008, 4:54pm UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/13 "2008-11-27T16:54:37Z")
. ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [January 12, 2009, 7:44am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/14 "2009-01-12T07:44:56Z")
:deadhorse: bump down to 100 for subframe connectors need cash this week! ---
**Author:** ![b18civic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/b18civic/32/5284_2.png) [@b18civic](https://forums.speedlife.net/u/b18civic)\ **Post date:** [January 12, 2009, 11:33am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/15 "2009-01-12T11:33:48Z")
ebay ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [January 12, 2009, 11:49am UTC](https://forums.speedlife.net/t/fs-mustang-steeda-subframe-connectors-ect-ect/56155/16 "2009-01-12T11:49:51Z")
these things r heavy as shit i rather sell em locally and if not ill just give me to the buyer of the car