# FS: Nissan R200 4.083 Ring and Pinion \*BRAND NEW

**URL:** https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306
**Category:** Classifieds
**Created:** [December 17, 2009, 6:14pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306 "2009-12-17T18:14:28Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [December 17, 2009, 6:14pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306/1 "2009-12-17T18:14:28Z")

</div>

I purchased this for my VQ35 setup early in 2009, I never had the time to install them into a pumpkin so the R&P just sat in a box in my house. Box was opened purely to make sure both parts were there and intact. They are BRAND NEW. I purchased a complete case with a 1.5 way LSD and 3.3FD for my V8 car so I have no use for this. New from a dealer this is $600+ from Z1Auto it’s $565 (+shipping). I’d like $500 shipped to the lower 48, give your Z or G a Holiday present 🙂 :icon21:

![http://www.mturck.com/ForSale/DSCF6955.jpg](http://www.mturck.com/ForSale/DSCF6955.jpg)

![http://www.mturck.com/ForSale/DSCF6953.jpg](http://www.mturck.com/ForSale/DSCF6953.jpg)

Note: This also fits various OTHER R200 Nissan casings, I cannot advise you which ones, so please do your research.

---

<div class="post-metadata">

### Author: ![shlammed](https://avatars.discourse-cdn.com/v4/letter/s/779978/32.png) [@shlammed](https://forums.speedlife.net/u/shlammed)
#### Post date: [December 17, 2009, 6:16pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306/2 "2009-12-17T18:16:15Z")

</div>

is the stock 240 diff not an R200 with 4.08 rear?

news to me if its not.

---

<div class="post-metadata">

### Author: ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [December 17, 2009, 6:35pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306/3 "2009-12-17T18:35:41Z")

</div>

I have no idea, this is from a 350z, I don’t know the minute details of 240’s.

---

<div class="post-metadata">

### Author: ![240racer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/240racer/32/5682_2.png) [@240racer](https://forums.speedlife.net/u/240racer)
#### Post date: [December 17, 2009, 6:42pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306/4 "2009-12-17T18:42:21Z")

</div>

It is, but I think theres 2 different r200 housings. i tried putting a 350z pinion and ring gear in a stock 240 housing and it wouldnt go.

---

<div class="post-metadata">

### Author: ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)
#### Post date: [December 17, 2009, 6:50pm UTC](https://forums.speedlife.net/t/fs-nissan-r200-4-083-ring-and-pinion-brand-new/130306/5 "2009-12-17T18:50:20Z")

</div>

There definitely are atleast 3 different R200 housings, that’s why there is a disclaimer at the bottom 🙂