# FS: Part out of an 89' S13 Fastback \*next to free Shell\*

**URL:** https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086
**Category:** Classifieds
**Created:** [June 1, 2005, 5:56am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086 "2005-06-01T05:56:24Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 1, 2005, 5:56am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/1 "2005-06-01T05:56:24Z")

</div>

So I’m going to part out the car I have… I have almost every stock peice of the car. If you want something I havn’t listed just let me know I should have it. Most of the prices are going to be firm, I may sway a bit on more expensive items. I will most likely give you a deal if you buy a bunch of parts.

**Rolling S13 Shell** - needs a little bodywork, not to bad though. My other thread has specifics on the body work needed. Floors and frame have been welded professionaly. I want this out of my garage, You supply the wheels and you can tow it away. It would make for a good project car. All I want is a 24 of corona for it.

**Exterior -** all exterior peices are all in very good shape, no rust or anything like that.

- Doors with interior paneling, glass, pwr windows, pwr locks and panasonic door speakers $70 each both for $100
- Hood $50
- Front Fenders $20 Each, both for $30.
- Front and rear bumpers $20 each both for $30
- Spoilerless hatch with glass $125 obo _SOLD_
- Sunroof, weatchstripping is a little ugly $20
- 2 sets of stock taillights, both in good shape, all bulbs work, no cracks $40 each
- Headlights with motors $15 each
- Sidemarkers $5 each, all 4 for $10

**Interior** - dark grey

- Backseats $30
- Seatbelt assembly’s $20 for everything
- Dash $30
- All Paneling for $50
- 5 speed pedal assembly’s $ 40

**Engine Bay**

- KA24E w/ 212KM - new timign chain and headgasket @ areound 205K I believe, still pulls strong. Engine needs some elbow grease, its dirty and I dont want to clean it. Comes with stock clutch with lots of life $120 obo
- Alternator $30
- Waterpump (only like 3-4,000 km on it. still new) $40
- Clutch fan with blades $25 (fan has some small cracks)
- Starter $30 _SOLD_
- MAFS $40
- Complete intake $ 40
- Exhaust Manifold $20

**Suspension/brakes etc**

- Stock shocks, still have lots of life $40 for all 4
- Brake calibers, less than 5,000km on them. $30 each

I prefer you to just PM me or just post if you want something. I’m located in Grimsby. Again if you want something I havnt listed let me know. You can call me at 905-945-5564 if you need something in a hurry, ask for Matt.

---

<div class="post-metadata">

### Author: ![dabum](https://avatars.discourse-cdn.com/v4/letter/d/41988e/32.png) [@dabum](https://forums.speedlife.net/u/dabum)
#### Post date: [June 1, 2005, 8:19am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/2 "2005-06-01T08:19:18Z")

</div>

alot of good prices here

---

<div class="post-metadata">

### Author: ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [June 1, 2005, 12:21pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/3 "2005-06-01T12:21:31Z")

</div>

![http://img271.echo.cx/img271/6292/pocket7dx.jpg](http://img271.echo.cx/img271/6292/pocket7dx.jpg)

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 1, 2005, 10:08pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/4 "2005-06-01T22:08:47Z")

</div>

nice picture

---

<div class="post-metadata">

### Author: ![brocoli](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brocoli/32/5518_2.png) [@brocoli](https://forums.speedlife.net/u/brocoli)
#### Post date: [June 2, 2005, 4:58am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/5 "2005-06-02T04:58:15Z")

</div>

do you have abs? and if so can i have the driveshaft??? let me know

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 2, 2005, 7:17am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/6 "2005-06-02T07:17:56Z")

</div>

no abs, sorry

---

<div class="post-metadata">

### Author: ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [June 2, 2005, 11:18am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/7 "2005-06-02T11:18:46Z")

</div>

> [@240\_Foz](#):
>
> nice picture

Thx. want to sell that part to me ?

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 2, 2005, 3:36pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/8 "2005-06-02T15:36:45Z")

</div>

i was wonderin if u still have to passenger door with the glass to fit a 93 240

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 3, 2005, 8:45am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/9 "2005-06-03T08:45:48Z")

</div>

> [@Sven](#):
>
> [quote=240\_Foz]nice picture

Thx. want to sell that part to me ?[/quote]

sure, but I dont know what it is.

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 3, 2005, 8:46am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/10 "2005-06-03T08:46:37Z")

</div>

> [@69porkchop69](#):
>
> i was wonderin if u still have to passenger door with the glass to fit a 93 240

Yup.

---

<div class="post-metadata">

### Author: ![imported\_Janus](https://avatars.discourse-cdn.com/v4/letter/i/c68b51/32.png) [@imported\_Janus](https://forums.speedlife.net/u/imported_Janus)
#### Post date: [June 3, 2005, 9:00am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/11 "2005-06-03T09:00:32Z")

</div>

I am intersted in:

Seat belt assemblies. Are they manual belts, or auto’s? How much for the belts, and all the trim pieces to convert auto-\>manual? (B pillar trim, upper door trim, everything)

Do you have the OEM 2.25" catalytic convertor? I need one.

PM me with the details, thanks.

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 3, 2005, 11:34am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/12 "2005-06-03T11:34:46Z")

</div>

I have the cat but its brand new and im going to keep it sorry. Belts and interior peices are yours. $20 for everything, I’ve PM’d you.

---

<div class="post-metadata">

### Author: ![Sven](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [June 3, 2005, 5:31pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/13 "2005-06-03T17:31:58Z")

</div>

> [@240\_Foz](#):
>
> [quote=Sven][quote=240\_Foz]nice picture

Thx. want to sell that part to me ?[/quote]

sure, but I dont know what it is.[/quote]

It is the plastic pocket that goes under the radio

---

<div class="post-metadata">

### Author: ![sidewaze](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sidewaze/32/5497_2.png) [@sidewaze](https://forums.speedlife.net/u/sidewaze)
#### Post date: [June 3, 2005, 6:22pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/14 "2005-06-03T18:22:44Z")

</div>

Hey Foz, any chance you have the transmission mount? I don’t need the cross member, just the mount.

Please let me know.

Thanks and have a good one.

Easy 8)

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 3, 2005, 11:02pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/15 "2005-06-03T23:02:25Z")

</div>

Sven: I dont think I have that, I think i took that out for my other 240 but Ill check for you tomorrow.

Sidewaze: Ya I have the mount, however the tranny isn’t out of the car yet… its still sitting on a jack connected to the driveshaft. If you want to remove the tranny for me, you can have the mount for free.

---

<div class="post-metadata">

### Author: ![sidewaze](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sidewaze/32/5497_2.png) [@sidewaze](https://forums.speedlife.net/u/sidewaze)
#### Post date: [June 4, 2005, 6:32am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/16 "2005-06-04T06:32:19Z")

</div>

> [@240\_Foz](#):
>
> Sidewaze: Ya I have the mount, however the tranny isn’t out of the car yet… its still sitting on a jack connected to the driveshaft. If you want to remove the tranny for me, you can have the mount for free.

Well the tranny does’nt have to be removed nor does the drive shaft have to be disconnected. The tranny cross member is held on by 4 bolts, and the mount is attached to that by 4 bolts as well. It’s really easy to get.

I live in Oshawa so it’s a little bit of a trip to Grimsby but I’d be more then happy to pay for it shipped to me. So if you can grab it, drop me a PM with your asking price and we’ll talk. 😃

---

<div class="post-metadata">

### Author: ![newbieracer](https://avatars.discourse-cdn.com/v4/letter/n/e47c2d/32.png) [@newbieracer](https://forums.speedlife.net/u/newbieracer)
#### Post date: [June 4, 2005, 7:20am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/17 "2005-06-04T07:20:51Z")

</div>

if i can get to grimsby in an hour, i will come get the motor, Where is Grimsby? Actually i may take the shell as well

---

<div class="post-metadata">

### Author: ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)
#### Post date: [June 4, 2005, 7:25am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/18 "2005-06-04T07:25:10Z")

</div>

$100 bucks and a case of beer and you can have the motor and the shell. Where are you located? Grimsby is just under an hour from toronto.

---

<div class="post-metadata">

### Author: ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)
#### Post date: [June 6, 2005, 2:08pm UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/19 "2005-06-06T14:08:56Z")

</div>

how about 200+ a case of corona for the shell,all exterior peices and interior,and the calipers.

---

<div class="post-metadata">

### Author: ![anothermethod](https://avatars.discourse-cdn.com/v4/letter/a/a9adbd/32.png) [@anothermethod](https://forums.speedlife.net/u/anothermethod)
#### Post date: [January 25, 2007, 1:59am UTC](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086/20 "2007-01-25T01:59:37Z")

</div>

Selling your cat? Let me know 😉

[Next page](https://forums.speedlife.net/t/fs-part-out-of-an-89-s13-fastback-next-to-free-shell/86086.md?page=2)
