# FS: Parts/lots of stuff Updated July 20th **URL:** \ **Category:** Classifieds\ **Created:** [March 14, 2007, 9:33pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897 "2007-03-14T21:33:56Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 14, 2007, 9:33pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/1 "2007-03-14T21:33:56Z")
Universal parts - Greddy Spec2 ProfecB silver (used) **SOLD** - Autometer Cobalt boost gauge (used, needs new map sensor) **SOLD** - Autometer Cobalt EGT gauge (used, needs a new probe) **SOLD** - HKS Boost control solenoid box (used) **B/O** - Razo Carbon Fiber Shift Knob (used) **$25** - Spal Electric 13.5" pusher fan (part# va13-ap9/c-35s, used) **SOLD** - K&N Air filter 3.25" id for tube (h1\_5.5"x h2\_4.5"x 8" long, used) **$50** - Aeromotive AFPR #13109 with fittings, -6ss line (used) **SOLD** - Aeromotive A1000 Fuel Pump has never seen fittings or gas **$250** - Defi D-Gauge Boost gauge w/ blk face (used) **SOLD** - Defi D-Gauge EGT gauge w/ blk face (used) **SOLD** - HKS SSQV BOV with adaptor for 2g/evo and block off plug for intake (used **SOLD** - Walbro 255hp (used) **SOLD** - Walbro 255 (used) **$50** - Walbro 255 (new)[B]SOLD DSM - 5x 1g bov **$20 each** - 2g stock center vent **B/O** - 2g stock cluster trim **B/O** - 2g big K&N filter kit with new filter **$80** - 2g maf 4.5" aluminum inlet for filter **$10** (include new vibrant filter for additional **$39.95** ) - 2x 2g maf (2 don’t have honeycombs and will need tuning software to install) **$50 each** - 2x 2g maf connectors with 6inch leads. **$10 each** - 2g o2 housing **$50** - 2g exhaust manifold(ported to 7cm) **SOLD** - 1g Dejon **CIP-1gA** 2.5 intake elbow for stock mas **$25** - 1g Complete o2 housing back, cat-less, awd 2.5 HKS exhaust **SOLD** - 2x 1g complete 3bolt lsd rear ends **$150 each** - 1g 3bolt diff only non-lsd **$50** - 3x DSM 450cc injector sets(4 injectors per set) **SOLD** - 3x DSM Resistor packs w/ weather tight connector **$40 each** - 2x 1g n/t 2.0L ecus (1x 90 and 1x 91) **B/O** - 2x 1g primary rad fan **B/O** - 2x 1g A/C fan **B/O** - 6x 1g rear 6x9 speaker brackets **B/O** - 1x 1g flipup headlight assembly with 2 motors **B/O** - 1x 1g alternators(will test @ Autozone before sale) **B/O** - 1x 1g 91+ Non-turbo throttle bodies **$50 each** - 3x 1g 91+ CAS (w/tin backing) **$50 each** - 5x 1g stock side mount intercoolers **$40 each** - 1g non-cruise t.b. cable **SOLD** - 1g Dejon (only one ever made) 4" intake pipe w/filter (turbo in stock location, puts filter in side mount intercooler area) **$200** - 2x 1g Cyclone intake manifolds both work **$50 each** - 5x 1g stock intake manifolds **$25 each** - 1g stock intake acordian hose **B/O** - 2x valve covers no cracks **$50 each** - 1g exhaust manifold (no cracks and ported to 7cm) **SOLD** - 2x 14b stock compressor outlet pipes **B/O** - 2x 1g Bov **$40** - 2x 1g bov pipe with flange **B/O** - 1g 90 fwd turbo 5spd trans **$150** - 1g 91 fwd turbo 5spd trans needs rebuild **$75** - complete 14b turbo with o2 housing partial oil drain line(little shaft play) **$100** - 14b turbine housing with slight crack **B/O** - 1g turbo stock t.b. inlet **B/O** - 1g full a-pillar pod dual gauge used **SOLD** - 1g Dejon Big Side mount intercooler (used, with custom aluminum duct) **$350** - 1g Dejon _Upper and Lower_ intercooler piping for side mount intercooler (used) **$100** Package deal 400 for intercooler with piping - Magnacore plug wires(used) **$35** - SBR fuel rail outlet adaptor to -6an **$15** - 1g turbo fwd 3inch downpipe ceramic coated **$150** - NOLOGY red plug wires used **$40** - 1g Turbo fwd flywheel **$40** - 1g or 2g - fwd or awd turbo clutch slowboyracing 3500 clutch used **SOLD** - Complete 4g63 6bolt longblock with swap parts **SOLD** - 1g awd 3 inch catless aluminized exhaust with real apexi muffler **$150** Misc - 4x Car mover dollies **SOLD** If you are interested in anything and really think the price is too high **PM me and we can discuss it**. For the most part the prices are pretty solid. ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [March 15, 2007, 5:30am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/2 "2007-03-15T05:30:56Z")
Give me a call gary"DSM"burch. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [March 15, 2007, 5:44am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/3 "2007-03-15T05:44:14Z")
good price on the a1000 ---
**Author:** ![Jskrapper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jskrapper/32/7570_2.png) [@Jskrapper](https://forums.speedlife.net/u/Jskrapper)\ **Post date:** [March 15, 2007, 5:45am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/4 "2007-03-15T05:45:48Z")
I don’t need to reinforce Gary’s reputation of being a great guy, so I will just say I will grab the gauge pod…and in a week or two as the budget clears up…I may pick up one of the LSD rear ends for a spare. ---
**Author:** ![upstateclipse](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/upstateclipse/32/7348_2.png) [@upstateclipse](https://forums.speedlife.net/u/upstateclipse)\ **Post date:** [March 15, 2007, 7:21am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/5 "2007-03-15T07:21:37Z")
check pm ---
**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\ **Post date:** [March 15, 2007, 7:45am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/6 "2007-03-15T07:45:13Z")
ill offer 40 for a 1g bov with flange ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 15, 2007, 9:36am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/7 "2007-03-15T09:36:26Z")
[quote=“boardjnky4,post:6,topic:25897"”] ill offer 40 for a 1g bov with flange [/quote] I have one that is still attached and that way you don’t need a gasket if you don’t weld it… I would like to get 50 you could grab it today. ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 15, 2007, 9:43am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/8 "2007-03-15T09:43:55Z")
[quote=“Anonymity,post:2,topic:25897"”] Give me a call gary"DSM"burch. [/quote] I don’t have my cell or your number on me…pm me. ---
**Author:** ![twiztidcivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/twiztidcivic/32/5040_2.png) [@twiztidcivic](https://forums.speedlife.net/u/twiztidcivic)\ **Post date:** [March 15, 2007, 10:10am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/9 "2007-03-15T10:10:44Z")
can u send pics of the air filter ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 15, 2007, 10:37am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/10 "2007-03-15T10:37:26Z")
[quote=“twiztidcivic,post:9,topic:25897"”] can u send pics of the air filter [/quote] there are 2 filter kits for sale. The vibrant one is this… and the k&n 2g kit is this… ---
**Author:** ![my240nissan](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@my240nissan](https://forums.speedlife.net/u/my240nissan)\ **Post date:** [March 15, 2007, 3:03pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/11 "2007-03-15T15:03:41Z")
pics of the defi gauges. can you pm your # ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 15, 2007, 5:58pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/12 "2007-03-15T17:58:43Z")
I can get pics tomorrow. But this is a general photo ![http://www.nippon-seiki.co.jp/defishop/product/dg/images/light.jpg](http://www.nippon-seiki.co.jp/defishop/product/dg/images/light.jpg) ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 15, 2007, 7:47pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/13 "2007-03-15T19:47:01Z")
I highlighted some stuff in the DSM section for Honda guys. ---
**Author:** ![Estorvito](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/estorvito/32/7234_2.png) [@Estorvito](https://forums.speedlife.net/u/Estorvito)\ **Post date:** [March 16, 2007, 4:51pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/14 "2007-03-16T16:51:40Z")
[quote=“Devioustsi,post:13,topic:25897"”] I highlighted some stuff in the DSM section for Honda guys. [/quote] Pm’d you also, free bump for a good seller. _GLWS_ ---
**Author:** ![Justin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin/32/7459_2.png) [@Justin](https://forums.speedlife.net/u/Justin)\ **Post date:** [March 16, 2007, 5:29pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/15 "2007-03-16T17:29:28Z")
What can those Fuel pumps handle? ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 17, 2007, 6:44pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/16 "2007-03-17T18:44:35Z")
Here are some flow numbers for the walbro’s, [http://www.roadraceengineering.com/fuelpumpflowrates.htm](http://www.roadraceengineering.com/fuelpumpflowrates.htm) The Walbro “255” LPH will supply enough fuel for 4x950cc/min injectors that are maxed out at a fuel pressure of 58psi, which would be good for about 625 crank horsepower on a 4cyl. At 73 psi fuel pressure this pump is only good for 575 crank horsepower. Where as the Walbro “255” HP will supply enough fuel for 4x1000cc/min injectors that are maxed out at a fuel pressure of 58psi, which would be good for about 675 crank horsepower on a 4 cyl. At 73 psi fuel pressure this pump is good for 700 crank horsepower. These numbers are based on calculations not real world numbers. ---
**Author:** ![my240nissan](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@my240nissan](https://forums.speedlife.net/u/my240nissan)\ **Post date:** [March 17, 2007, 6:49pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/17 "2007-03-17T18:49:19Z")
what else is needed to run the defi gauges? ---
**Author:** ![Mixmastermike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mixmastermike/32/7314_2.png) [@Mixmastermike](https://forums.speedlife.net/u/Mixmastermike)\ **Post date:** [March 17, 2007, 7:24pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/18 "2007-03-17T19:24:56Z")
[quote=“my240nissan,post:17,topic:25897"”] what else is needed to run the defi gauges? [/quote] These gauges are the defi d-gauge series and they do not require anything else to run them. They opperate just like a normal gauge does. The BF series requires the controller to operate ---
**Author:** ![Justin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin/32/7459_2.png) [@Justin](https://forums.speedlife.net/u/Justin)\ **Post date:** [March 18, 2007, 8:43am UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/19 "2007-03-18T08:43:14Z")
[quote=“Devioustsi,post:16,topic:25897"”] … which would be good for about 625 crank horsepower on a **4cyl** …which would be good for about 675 crank horsepower on a **4 cyl** … [/quote] Any idea what it can handle on a 6cyl? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 18, 2007, 2:18pm UTC](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897/20 "2007-03-18T14:18:34Z")
would you happen to have 6 bolt flywheel bolts? [Next page](https://forums.speedlife.net/t/fs-parts-lots-of-stuff-updated-july-20th/25897.md?page=2)