# FS: RB25DET Package **URL:** \ **Category:** Classifieds\ **Created:** [January 28, 2007, 12:16pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357 "2007-01-28T12:16:57Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [January 28, 2007, 12:16pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/1 "2007-01-28T12:16:57Z")
Alright I have an 89 nissan 240sx. The main purpose of the sale is the items listed below. The car has koni coil overs and koni adjustables installed. It has a 3 inch mandrel bent exhaust as well. I had a bit of an accident and needless to say the body is significantly damaged on the right rear quarterpanel zone. Anyways the tires and shocks zones were not hit and everything is still alright aside from body damage. I am trying to sell the car as a hole. I had started parting it out like the rb25det wire harness and apexi avcr. But I need to get rid of the whole thing. The prices listed below are what I paid for the big hitter items. Exhaust Mandrel Bent 3" - $800 Custom Muffler = $400 RB25DET with transmission and ecu $4000.00 Canadian not including shipping Custom Intercooler (half length of front width of car) $800.00 Canadian Mckinney motorsport Drive Shaft for rb25det (on any 240sx) $450 Canadian Mckinney motorsport custom motormounts = $500.00 Canadian Custom 3 Row rad for an 89 nissan 240sx dimension = $900.00 Canadian If you need pictures for specific item pm me as well and I can email the pictures to you. I am asking for $4500 firm. You can PM me I check regularly. ---
**Author:** ![s13Junkyard](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13junkyard/32/5502_2.png) [@s13Junkyard](https://forums.speedlife.net/u/s13Junkyard)\ **Post date:** [January 28, 2007, 12:29pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/2 "2007-01-28T12:29:00Z")
pic of the car plz ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [February 24, 2007, 7:11am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/3 "2007-02-24T07:11:51Z")
Pictures have been posted ---
**Author:** ![GreyGandalf\_S14](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greygandalf_s14/32/5475_2.png) [@GreyGandalf\_S14](https://forums.speedlife.net/u/GreyGandalf_S14)\ **Post date:** [February 24, 2007, 4:37pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/4 "2007-02-24T16:37:54Z")
sorry about your loss dude, i feel your pain, trust me… would u consider a trade for another car? the car(s) would be in good working order, lemme know PauL ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [March 17, 2007, 4:39pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/5 "2007-03-17T16:39:28Z")
The car is still for sale… PM if interested ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [March 27, 2007, 10:13am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/6 "2007-03-27T10:13:50Z")
Still up for grabs… ---
**Author:** ![CB\_240](https://avatars.discourse-cdn.com/v4/letter/c/ecc23a/32.png) [@CB\_240](https://forums.speedlife.net/u/CB_240)\ **Post date:** [March 27, 2007, 6:37pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/7 "2007-03-27T18:37:04Z")
is the wiring still there or is it gone? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 29, 2007, 10:23am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/8 "2007-03-29T10:23:12Z")
Lets see some pics of the damage. Is the frame straight? Is the wiring harness still there? Does the car run? ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [March 29, 2007, 2:27pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/9 "2007-03-29T14:27:48Z")
To answer your questions together. Send me your email address’s and I will send pictures to you of the damage. Wireing harness is sold so no the car is not running unfortunately. As far as the frame is concerned from what I can see the frame is straight however there is heavy damage to the right rear quarterpanel as well as the roof if you are a body man then I don’t think you would have an issue using the body as the car has zero rust on it I stripped to the frame rewelded the entire car and blacked out all areas on the frame were I had work done. But the alternative is to swap all items out into new vehicle. ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [April 26, 2007, 9:36am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/10 "2007-04-26T09:36:52Z")
This is still up for grabs…PM me if interested ---
**Author:** ![JRFT\_WERKS](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@JRFT\_WERKS](https://forums.speedlife.net/u/JRFT_WERKS)\ **Post date:** [April 26, 2007, 1:18pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/11 "2007-04-26T13:18:05Z")
Pm’d ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [April 26, 2007, 9:36am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/12 "2007-04-26T09:36:52Z")
This is still up for grabs…PM me if interested ---
**Author:** ![JRFT\_WERKS](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@JRFT\_WERKS](https://forums.speedlife.net/u/JRFT_WERKS)\ **Post date:** [April 26, 2007, 1:18pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/13 "2007-04-26T13:18:05Z")
Pm’d ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [May 6, 2007, 8:46am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/14 "2007-05-06T08:46:41Z")
Time for spring projects to get underway so here is an easy one which is still up for sale ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [May 13, 2007, 4:01pm UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/15 "2007-05-13T16:01:34Z")
PM if interested ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [May 30, 2007, 9:03am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/16 "2007-05-30T09:03:57Z")
Still up for grabs ---
**Author:** ![Doba](https://avatars.discourse-cdn.com/v4/letter/d/a8b319/32.png) [@Doba](https://forums.speedlife.net/u/Doba)\ **Post date:** [May 30, 2007, 9:47am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/17 "2007-05-30T09:47:09Z")
Just a quick question, who installed this for you and who did the wiring? seeing how you sold the wiring harness, how hard is it to find another or rewire another harness. ---
**Author:** ![racerx240sx](https://avatars.discourse-cdn.com/v4/letter/r/22d042/32.png) [@racerx240sx](https://forums.speedlife.net/u/racerx240sx)\ **Post date:** [July 8, 2007, 8:09am UTC](https://forums.speedlife.net/t/fs-rb25det-package/103357/18 "2007-07-08T08:09:47Z")
car is still up for grabs. This is an easy swap. Everything you need to make a rb25det swap. Except wiring harness and boost controller. The standard stuff when you swap and engine thermostat and clutch. All you need is a shell. Time to do the swap I would say a good solid seven days. It can also be done in two days for those experienced. PM me if interested.