# FS: RB26DETT R32 MAF

**URL:** <https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320>\
**Category:** Classifieds\
**Created:** [January 31, 2006, 9:25am UTC](https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320 "2006-01-31T09:25:59Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![spoonek9](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@spoonek9](https://forums.speedlife.net/u/spoonek9)\
**Post date:** [January 31, 2006, 9:25am UTC](https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320/1 "2006-01-31T09:25:59Z")

</div>

I have a rb26dett maf from an r32, ill let it go for 100 firm… pm me

---

<div class="post-metadata">

**Author:** ![spoonek9](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@spoonek9](https://forums.speedlife.net/u/spoonek9)\
**Post date:** [February 10, 2006, 7:57pm UTC](https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320/2 "2006-02-10T19:57:42Z")

</div>

will work the same as a z32 maf…good for more boost on an sr20det motor

---

<div class="post-metadata">

**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\
**Post date:** [February 10, 2006, 8:05pm UTC](https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320/3 "2006-02-10T20:05:30Z")

</div>

It wont support as much as a Z32 though. Correct?

---

<div class="post-metadata">

**Author:** ![spoonek9](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@spoonek9](https://forums.speedlife.net/u/spoonek9)\
**Post date:** [February 11, 2006, 9:08pm UTC](https://forums.speedlife.net/t/fs-rb26dett-r32-maf/141320/4 "2006-02-11T21:08:51Z")

</div>

Depends on what your using? if its emanage or safc or something like that you can use any maf sensor… just change the hotwire signal.