# FS: Roll Cages

**URL:** <https://forums.speedlife.net/t/fs-roll-cages/104379>\
**Category:** Vendor Marketplace\
**Created:** [March 11, 2007, 10:01am UTC](https://forums.speedlife.net/t/fs-roll-cages/104379 "2007-03-11T10:01:48Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![AnDrEw](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)\
**Post date:** [March 11, 2007, 8:13pm UTC](https://forums.speedlife.net/t/fs-roll-cages/104379/12 "2007-03-11T20:13:17Z")

</div>

> [@Tranny grinding 5th to 6th](https://forums.speedlife.net/t/tranny-grinding-5th-to-6th/11642/11):
>
> that pics is a 5 point

Exacly where is the 5th point?  
Further, your rear stay and cross brace bolting points are not gusseted, the back plates are also not big enough. They are required to be no less than 20sq. in. and shall be same thickness as cage. The general rule of thumb is 5in x 5in.

Andrew.

---

_[View the full topic](https://forums.speedlife.net/t/fs-roll-cages/104379)._