# FS: s13 megan racing coilovers **URL:** \ **Category:** Classifieds\ **Created:** [December 12, 2008, 7:00am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534 "2008-12-12T07:00:52Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 12, 2008, 7:00am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/1 "2008-12-12T07:00:52Z")
Hey guys - I had the front lower mounts drilled out slightly oversized in order to fit on my s14. I then realized the rear’s are 4 inches shorter and have a different bolt setup. 500kms on them. They’ve been sitting in my garage for a few months now. Tiny bit of surface rust on threads, the flash makes it look way worse. I will gladly clean this up with a wire brush before I send them off. My loss is your gain, I don’t want to sell these coils but the reality is I’d have to make an adapter plate for the rear, and I want to do this car properly. $800 delivered to the GTA. ![http://i114.photobucket.com/albums/n260/daveowen/for%20sale/DSC02377.jpg](http://i114.photobucket.com/albums/n260/daveowen/for%20sale/DSC02377.jpg) ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [December 13, 2008, 7:33pm UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/2 "2008-12-13T19:33:01Z")
since u drilled out the holes you have lost alot of value ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 4:20am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/3 "2008-12-15T04:20:09Z")
The holes are hardly any bigger… makes no difference @ all. Price drop to $750. ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 4:54am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/4 "2008-12-15T04:54:29Z")
or $300 for the rears. ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 5:14am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/5 "2008-12-15T05:14:47Z")
does everything move freely. ie collars and bracket? ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 5:50am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/6 "2008-12-15T05:50:31Z")
yep, they did a month ago - if you are serious I will clean them all up and make sure everything is in perfect order. ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 5:59am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/7 "2008-12-15T05:59:55Z")
pillow ball moves freely? ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 6:31am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/8 "2008-12-15T06:31:01Z")
yes sir! ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 6:34am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/9 "2008-12-15T06:34:21Z")
are u willing to part the fronts out??? ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 6:39am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/10 "2008-12-15T06:39:23Z")
Only willing to part the rears. ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 6:42am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/11 "2008-12-15T06:42:36Z")
300$ for the rear. ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 7:05am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/12 "2008-12-15T07:05:51Z")
i cant justify spending 750 front used drilled out coils were i can get a set for 850 off of another member, in near mint shape.??? good luck with the sale. if you change ur ming let me know thanks ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 7:19am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/13 "2008-12-15T07:19:07Z")
the holes are only slightly larger, this makes no difference whatsoever. I would say these are in near mint shape, the surface rust has been removed from the coils, they look and perform great. ---
**Author:** ![white240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/white240/32/5651_2.png) [@white240](https://forums.speedlife.net/u/white240)\ **Post date:** [December 15, 2008, 7:53am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/14 "2008-12-15T07:53:51Z")
I don’t think you can actually argue the point that it “makes no difference whatsoever”. A larger diameter hole, regardless of how tight you crank down the bolts, COULD still induce a fair amount of front end slop if pushed hard. ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [December 15, 2008, 8:07am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/15 "2008-12-15T08:07:09Z")
yea these is alot of difference it will also throw off ur alignment ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 8:25am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/16 "2008-12-15T08:25:39Z")
You raise good points gentlemen. I will take new pics and sell the rears only. Thanks. ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 9:13am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/17 "2008-12-15T09:13:12Z")
thats what im getting at. the bottom bolt will have slop in the pivot allowing it to shift,becuase the hole is bigger where the top one that is sloted will be affected too cuz the chamber part of it is drilled out. ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 9:31am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/18 "2008-12-15T09:31:01Z")
However, if you are stronger in a 5 year old boy, you can tighten it down causing no movement. ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [December 15, 2008, 9:38am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/19 "2008-12-15T09:38:39Z")
lol ^^ good one im trying to help you out u dumb fuck. good looking out. ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [December 15, 2008, 9:42am UTC](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534/20 "2008-12-15T09:42:48Z")
How are you helping out? Use an air impact and tighten it. Man up, it wont make a difference. [Next page](https://forums.speedlife.net/t/fs-s13-megan-racing-coilovers/120534.md?page=2)