# FS: S13 & universal aftermarket parts **URL:** \ **Category:** Classifieds\ **Created:** [May 30, 2008, 6:09pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917 "2008-05-30T18:09:02Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [May 30, 2008, 6:09pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/1 "2008-05-30T18:09:02Z")
**Asking Price** : $300 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : no, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : megan racing 3" catback exhaust, came off of an SR20DET S13. test pipe not included. ![http://i11.photobucket.com/albums/a192/simplemind7/Picture004-11.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture004-11.jpg) ![http://i11.photobucket.com/albums/a192/simplemind7/Picture005-10.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture005-10.jpg) **Asking Price** : $ 250 OBO **Condition** : Used **Location** : Ayr, ON **Will Ship?** : No **Contact Info** : Send PM or post here **Description** : stock red top SR20 turbo elbow with 1 piece exhaust from the turbo elbow to the tail pipe. piping looks to be 2.5". cat is hollowed out, straight through. exhaust doesn’t have any leaks and uses 3 stock exhaust hangers. sounds pretty good. ![http://i11.photobucket.com/albums/a192/simplemind7/exhaust006.jpg](http://i11.photobucket.com/albums/a192/simplemind7/exhaust006.jpg) ![http://i11.photobucket.com/albums/a192/simplemind7/exhaust007.jpg](http://i11.photobucket.com/albums/a192/simplemind7/exhaust007.jpg) ![http://i11.photobucket.com/albums/a192/simplemind7/exhaust003.jpg](http://i11.photobucket.com/albums/a192/simplemind7/exhaust003.jpg) ![http://i11.photobucket.com/albums/a192/simplemind7/exhaust004.jpg](http://i11.photobucket.com/albums/a192/simplemind7/exhaust004.jpg) ![http://i11.photobucket.com/albums/a192/simplemind7/exhaust005.jpg](http://i11.photobucket.com/albums/a192/simplemind7/exhaust005.jpg) **Asking Price** : $60 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Bomz racing front strut bar ![http://i11.photobucket.com/albums/a192/simplemind7/Picture016-5.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture016-5.jpg) **Asking Price** : $30 **Condition** : Used **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Defi knock off boost gauge, needle doesn’t quite sit at zero. looks great when lit up. **Asking Price** : $40 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Defi knock off Air/Fuel gauge, works well, looks great when lit up. pic of gauges: ![http://i11.photobucket.com/albums/a192/simplemind7/Picture010-8.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture010-8.jpg) **Asking Price** : $30 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Autometer Pro-Comp oil pressure guage, no sensor. **Asking Price** : $60 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Autometer Carbon Fiber series oil pressure guage with sending unit. ![http://i11.photobucket.com/albums/a192/simplemind7/Picture002-24.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture002-24.jpg) **Asking Price** : $90 **Condition** : Used, good condition **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Autometer Carbon Fiber series EGT guage with probe, control box and wiring. ![http://i11.photobucket.com/albums/a192/simplemind7/Picture001-24.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture001-24.jpg) **Asking Price** : $300 **Condition** : Brand new, assembled but never used **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Megasquirt 2 version 3.0 board with 12 foot harness, a couple of the wires on the harness are cut but it isn’t hard to reattach them. unit is assembled and ready to be installed. Good standalone ECU on a budget! i don’t have a picture of the harness unfortunately. ![http://i11.photobucket.com/albums/a192/simplemind7/Picture003-22.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture003-22.jpg) **Asking Price** : $60 **Condition** : New, adapters welded on but never put onto a car **Location** : Ayr, ON **Will Ship?** : No, but delivery/meeting up can be arranged **Contact Info** : PM or post here **Description** : Magnaflow (i think) high flow 2.5" cat with adapter for 2" inlet and 3" outlet. ![http://i11.photobucket.com/albums/a192/simplemind7/Picture010-14.jpg](http://i11.photobucket.com/albums/a192/simplemind7/Picture010-14.jpg) Asking Price: $ 120 OBO Condition: Used Location: Ayr, ON Will Ship?: rather not Contact Info: Send PM Description: I have a set (front and rear) of lightly used cross drilled rotors and PBR axxis brake pads for non-ABS S13. the rear rotors have some surface rust on them as they haven’t been used in a little while, but some sandpaper and a couple hard stops would clean them up quite well, i don’t believe it’s enough rust to require a resurface. the fronts are currently on my car but they can come off for the buyer with a couple days notice. the rotors aren’t noticeably worn, there isn’t a lip around the outside or any uneven wear. the pads have plenty of meat left on them, at least 90%. nice affordable upgrade if you need to do a brake job. ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [June 9, 2008, 10:21am UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/2 "2008-06-09T10:21:24Z")
up, make some offers. ---
**Author:** ![SpHiNxXx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sphinxxx/32/5659_2.png) [@SpHiNxXx](https://forums.speedlife.net/u/SpHiNxXx)\ **Post date:** [June 9, 2008, 7:34pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/3 "2008-06-09T19:34:50Z")
willing to trade??? pm’d ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [June 9, 2008, 8:02pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/4 "2008-06-09T20:02:41Z")
i’m taking trades on some things, SR20/S13 performance parts, car audio and champagne body panels in good condition. it would have to be either a straight trade or a trade +cash for my stuff as i don’t have a lot of spare cash at the moment. ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [June 25, 2008, 11:07pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/5 "2008-06-25T23:07:53Z")
well i can’t edit, but the megan exhaust, turbo elbow and EGT gauge are sold. everything else is still available. bump. ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [July 1, 2008, 9:54pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/6 "2008-07-01T21:54:00Z")
megasquirt sold. $180 for the full SR20 exhaust, it would probably fit bottom mount T25 KA-T setups too, full exhaust on a budget! still available: SR exhaust megan boost & A/F gauges autometer oil pressure gauges cat if i could get some of this stuff sold tomorrow that would be superb, i could use the money. thanks! ---
**Author:** ![matt711](https://avatars.discourse-cdn.com/v4/letter/m/a3d4f5/32.png) [@matt711](https://forums.speedlife.net/u/matt711)\ **Post date:** [June 29, 2009, 8:45pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/7 "2009-06-29T20:45:51Z")
ive got two 12 inch clarion subz never been out of box 1 year warenty would you consider for the exhaust and high flow cat? ---
**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\ **Post date:** [June 29, 2009, 8:53pm UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/8 "2009-06-29T20:53:29Z")
LOL, this thread is over a year old. ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [June 30, 2009, 6:02am UTC](https://forums.speedlife.net/t/fs-s13-universal-aftermarket-parts/115917/9 "2009-06-30T06:02:35Z")
Yes, everything is long sold.