# FS: s14 Engine & Garage full of Parts from Swap **URL:** \ **Category:** Classifieds\ **Created:** [December 3, 2006, 4:42pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188 "2006-12-03T16:42:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 3, 2006, 4:42pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/1 "2006-12-03T16:42:12Z")
Many Parts left over from swap – ['96 SR20DET 5-speed Clip into '95 KA24DE Auto s14 240sx] **All Parts available for pick up in Waterloo** Some parts can be transported to the GTA (at my convenience). PM or email: [benjamin@vrspeed.com](mailto:benjamin@vrspeed.com) for more information _ **—Engine / Engine Bay—** _ **-s14 stock muffler $40-** (Almost no rust) ![http://www.vrspeed.com/sitebuilder/images/IMG00125-600x480.jpg](http://www.vrspeed.com/sitebuilder/images/IMG00125-600x480.jpg) **-KA Radiator w/electrical AC fan & Mech Fan $30-** (Stock '95 s14 setup) _Shroud Cracked – Price Drop_ **-Aluminum intake pipe for KA $40-** (Connects MAF to intake, with all vac. lines, blue silicone couplers): ![http://www.vrspeed.com/sitebuilder/images/IMG00127-600x480.jpg](http://www.vrspeed.com/sitebuilder/images/IMG00127-600x480.jpg) **-KA Air Cond System $100-** All parts (compressor, rad, tank - minus main cold and main hot line) Blew cold and quiet before removal. **-Various 95KA/96SR Fluid Reservoirs-** ($All B.O$): -SR/KA Power Steering Reservoir -KA Washer Reservoir -SR Coolant Reservoir _ **— Electrical —** _ **-1996 JDM s14 Digital Climate Control $300-** All sensors, all wiring, complete & out of clip: ![http://www.vrspeed.com/sitebuilder/images/Misc_Parts02-600x450.jpg](http://www.vrspeed.com/sitebuilder/images/Misc_Parts02-600x450.jpg) **-1995 s14 Auto ECU $50-** Swap into 5-speed car for instant speed cut removal. **-SR/KA combination switch (light & wiper stalks) $30-** **-Big-ass Tach. Lights up 6 different colours! $15-** **Various 95KA/96SR Electrical Controllers-** ($All B.O$): -KA Cruise control Processor -SR Smart Entrance (locks, security) Controller -KA Auto Transmission Controller -KA/SR Washer Motor Amplifier _ **—Body/Trim/Plastics—** _ **-Stock '95 s14 Fog lights $150-** Work perfectly but don’t fit with my FMIC piping **-Stock s14 rear Bumper Facia & Foam $50-** Factory FN2 (Green) colour, few paint scratches: ![http://www.vrspeed.com/sitebuilder/images/IMG00126-600x480.jpg](http://www.vrspeed.com/sitebuilder/images/IMG00126-600x480.jpg) **-Wiper/Vent Plastic Finisher Plate $15-** (black, sits under wipers, against windshield) Various Interior Plastics from Clip $Free/B.O.$ [Send me a picture of what you are looking for, no tranny swap parts] _ **—Brakes/Hubs/Suspension—** _ **-JDM s14 Brake Booster & 15/16 Master Cylinder Assembly $90-** Good Upgrade! JDM s14 uses this to drive z32 4-pot brakes: ![http://www.vrspeed.com/sitebuilder/images/Misc_Parts01-600x450.jpg](http://www.vrspeed.com/sitebuilder/images/Misc_Parts01-600x450.jpg) **-5-Bolt JDM Hubs & Front Upright Assembly $80-** 90k km, no rust, has z32 big-brake rock shields! (springs, shocks, LCA not included) **-s14 Drop Zone Lowering Springs (Set of 4) $80-** Used, No Winters, fit on stock shocks. Unknown spring Rates, No bounce or camber problems (stiffer than stock), greatly improve appearance & reduce body roll: ![http://www.vrspeed.com/sitebuilder/images/Lowered02-466x354.jpg](http://www.vrspeed.com/sitebuilder/images/Lowered02-466x354.jpg) ![http://www.vrspeed.com/sitebuilder/images/Lowered01-468x354.jpg](http://www.vrspeed.com/sitebuilder/images/Lowered01-468x354.jpg) **-Stock T/C Rod Pair $30-** (Stock, bad bushings) **-KA clutch pedal (for 5-speed swaps) $40-** **-s14 front brake callipers & Lines, Stock work well $40-** ![http://www.vrspeed.com/sitebuilder/images/Stock_s14_Callipers-600x450.jpg](http://www.vrspeed.com/sitebuilder/images/Stock_s14_Callipers-600x450.jpg) **-s14 rear brake discs, used. $10-** _ **—Misc Free/B.O. Bin—** _ 2 sets of Pimptastic Blue/White Light-up Indiglo s14 gauge stickers. Unique appearance. All wiring but no instructions: ![http://www.vrspeed.com/sitebuilder/images/Gauge_Covers-600x450.jpg](http://www.vrspeed.com/sitebuilder/images/Gauge_Covers-600x450.jpg) s14 KA Intake system parts - various, stock. s14 Drive Shaft engine half only (fits all) SR RHD Brake Pedal (Bracket same but pedal RHD only!) SR Power steering lines. SR Gas Pedal (Positioning slightly different) Clutch damper circuit (I recommend removing this) Misc Wiring harness parts from SR (All the SR clip dash and engine compartment wiring in a box) Various intercooler T-style piping clamps ---
**Author:** ![alesserfate](https://avatars.discourse-cdn.com/v4/letter/a/f6c823/32.png) [@alesserfate](https://forums.speedlife.net/u/alesserfate)\ **Post date:** [December 3, 2006, 5:21pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/2 "2006-12-03T17:21:00Z")
pm’d about s14 aluminum intake pipe ---
**Author:** ![JamesS](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@JamesS](https://forums.speedlife.net/u/JamesS)\ **Post date:** [December 3, 2006, 6:09pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/3 "2006-12-03T18:09:17Z")
are you selling those fog lights? ---
**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\ **Post date:** [December 3, 2006, 6:11pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/4 "2006-12-03T18:11:00Z")
> [@JamesS](#): > > are you selling those fog lights? yes he is as stated: —Body/Trim/Plastics— -Stock '95 s14 Fog lights $150- Work perfectly but don’t fit with my FMIC piping ---
**Author:** ![ziptied](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ziptied/32/5509_2.png) [@ziptied](https://forums.speedlife.net/u/ziptied)\ **Post date:** [December 4, 2006, 8:44am UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/5 "2006-12-04T08:44:35Z")
s14 stock muffler 40obo… Will that fit the s13 hatch with minor mods? ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 4, 2006, 10:33am UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/6 "2006-12-04T10:33:20Z")
The muffler only? I think they are the same - the piping to the muffler is different. I don’t know for sure… ---
**Author:** ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)\ **Post date:** [December 4, 2006, 11:41am UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/7 "2006-12-04T11:41:09Z")
Does the front S14 5 bolt include spindles? And do you have any pics? ---
**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\ **Post date:** [December 4, 2006, 1:14pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/8 "2006-12-04T13:14:16Z")
have you got the radio bracket/din pocket? ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 4, 2006, 1:25pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/9 "2006-12-04T13:25:59Z")
This is the complete spindle/cast suspension upright assembly minus all the parts that bolt to it (brakes, lower control arm, steering tie rod, and suspension strut). Everything you need to make the front end of a s14 4-bolt into 5-bolt. One piece short for the s13 guys though… Sorry. No more pics unless you give me an email (I can’t upload). Also, please be patient - I have a fulltime + job so unfortunately there’s not much time left in the day to play “cars”. I will get back to you though! ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 4, 2006, 1:31pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/10 "2006-12-04T13:31:35Z")
DIN pocket is in my car and I like it there. Radio bracket plastic housing is badly beaten, potentially sold and not available for a while anyway since I’m using it to design a gauge housing. Sorry… 🙂 If you are looking for the steel supporting bracket you can’t see, yes I think I have that. ---
**Author:** ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)\ **Post date:** [December 4, 2006, 1:43pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/11 "2006-12-04T13:43:29Z")
> [@greybrother](#): > > This is the complete spindle/cast suspension upright assembly minus all the parts that bolt to it (brakes, lower control arm, steering tie rod, and suspension strut). Everything you need to make the front end of a s14 4-bolt into 5-bolt. One piece short for the s13 guys though… > > Sorry. No more pics unless you give me an email (I can’t upload). Also, please be patient - I have a fulltime + job so unfortunately there’s not much time left in the day to play “cars”. I will get back to you though! To put this on a S13, I would only need S14 balljoints correct? ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 4, 2006, 9:51pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/12 "2006-12-04T21:51:16Z")
\*\*\*\*\*\*\* Damn email was down! If you sent an email before 1am Tuesday, Dec 05 Please re-send. Very sorry for the trouble! \*\*\*\*\*\*\* And yes, for the s13 I am told you need the lower control arm/balljoint too - although I have no s13 experience. ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 7, 2006, 12:22pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/13 "2006-12-07T12:22:37Z")
Engine Price Dropped $200- Its Gotta Go soon! All parts now available for pick up. I also have a wide variety of wiring, connectors, piping, SR20 intake parts… many leftovers not listed above… ---
**Author:** ![Souljourner](https://avatars.discourse-cdn.com/v4/letter/s/a88e4f/32.png) [@Souljourner](https://forums.speedlife.net/u/Souljourner)\ **Post date:** [December 8, 2006, 11:23pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/14 "2006-12-08T23:23:40Z")
> [@greybrother](#): > > This is the complete spindle/cast suspension upright assembly minus all the parts that bolt to it (brakes, lower control arm, steering tie rod, and suspension strut). Everything you need to make the front end of a s14 4-bolt into 5-bolt. One piece short for the s13 guys though… > > Sorry. No more pics unless you give me an email (I can’t upload). Also, please be patient - I have a fulltime + job so unfortunately there’s not much time left in the day to play “cars”. I will get back to you though! is the hubs for ABS or non-abs? Thanks ---
**Author:** ![Red\_240sx](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Red\_240sx](https://forums.speedlife.net/u/Red_240sx)\ **Post date:** [December 9, 2006, 7:56am UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/15 "2006-12-09T07:56:02Z")
hey question, wud u be willing to sell ur s14 seats? if so leather? cloth? color? condition? can u get pics? thnx ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 9, 2006, 8:33am UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/16 "2006-12-09T08:33:16Z")
Hi. No seats for sale, yet… They are leather, good shape. Full exhaust - SOLD MAF - SOLD Hubs (non-ABS) - Pending Sale Engine - Pending Sale Gauge Overlays - Pending Sale Thanks for your interest! ---
**Author:** ![greybrother](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greybrother/32/5551_2.png) [@greybrother](https://forums.speedlife.net/u/greybrother)\ **Post date:** [December 20, 2006, 9:04pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/17 "2006-12-20T21:04:30Z")
Engine Sold. List and some prices updated. ---
**Author:** ![K1NG](https://avatars.discourse-cdn.com/v4/letter/k/71e660/32.png) [@K1NG](https://forums.speedlife.net/u/K1NG)\ **Post date:** [June 25, 2007, 5:41pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/18 "2007-06-25T17:41:55Z")
Where did you get that kit or who makes it I want it for my S14 looks ill ---
**Author:** ![Lucidsnow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lucidsnow/32/5538_2.png) [@Lucidsnow](https://forums.speedlife.net/u/Lucidsnow)\ **Post date:** [June 25, 2007, 6:59pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/19 "2007-06-25T18:59:43Z")
anyone headed up to waterloo wanna lend a hand to pick up something for me too? if so let me know thanks… edit: haha true… i just wanted to know whos going to waterloo 😛 justin il give ya a shout… thanks… ---
**Author:** ![jstn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jstn/32/5524_2.png) [@jstn](https://forums.speedlife.net/u/jstn)\ **Post date:** [June 25, 2007, 7:30pm UTC](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188/20 "2007-06-25T19:30:49Z")
this thread was from december of 2006… what do you need season, i might be heading up to waterloo [Next page](https://forums.speedlife.net/t/fs-s14-engine-garage-full-of-parts-from-swap/102188.md?page=2)