# FS: Sentra Spec V Turbo Kit + Engine + Drag Radials **URL:** \ **Category:** Classifieds\ **Created:** [October 2, 2007, 3:58pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987 "2007-10-02T15:58:21Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [October 2, 2007, 3:58pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987/1 "2007-10-02T15:58:21Z")
I’m going to be taking off my turbo starting this week hopefully finishing taking it all off by Sunday. Asking 4000$ obo for the Turbo Kit which comes with the following: T31/T04e Garrett 57 trim turbo had an issue with it that wasn’t my fault at all. Just got the turbo back today from Blaast Performance. So it’s never been on a car. Newly rebuilt. TurboXS BOVs (2) Custom Front Mount Intercooler with all the piping TurboXS Dual Stage Boost Controller Koyo Aluminum Radiator Apex’i SAFC II Innovative Motorsports LM-1 Wideband o2 Sensor 3 guage upper bin pod with Oil Pressure to turbo, Boost, and Oil pressure to engine guages (also have a water temp guage that will easily replace the oil pressure to turbo guage.) Steering Column Guage pod with Air/Fuel Meter and Raptor shift lift Door column guage pod with Exhaust Gas Temp Guage 3" Piping from turbo back with 3" Magnaflow dual tip muffler. All the piping and everything needed to install onto an 02/03 for sure. Might need to monkey with the intercooler piping abit for the 04-06s. Door column guage pod with Exhaust Gas Temp Guage 3" Piping from turbo back with 3" Magnaflow dual tip muffler. 04 Altima QR25DE engine that has a machined head. This engine will need new cams and a few valve retainer caps though. 1000 obo. BF Goodrich T/A Drag Radials (2) with lots of life left in em. (Used at the track for one night.) 300obo. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [October 2, 2007, 5:16pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987/2 "2007-10-02T17:16:25Z")
size of DR’s ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [October 2, 2007, 5:53pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987/3 "2007-10-02T17:53:57Z")
225/50/15 ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [October 5, 2007, 3:19pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987/4 "2007-10-05T15:19:18Z")
BUMP ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [October 8, 2007, 1:35pm UTC](https://forums.speedlife.net/t/fs-sentra-spec-v-turbo-kit-engine-drag-radials/147987/5 "2007-10-08T13:35:33Z")
Almost everything is off the car now. Just gotta get all the guages off as well as the SAFC. Should be able to get that done sometime this week.