# FS: SIEMENS DEKA \[630cc | 60lbs/hr\] **URL:** \ **Category:** Classifieds\ **Created:** [July 27, 2011, 12:59pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646 "2011-07-27T12:59:53Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![imported\_ST4TUS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_st4tus/32/6290_2.png) [@imported\_ST4TUS](https://forums.speedlife.net/u/imported_ST4TUS)\ **Post date:** [July 27, 2011, 12:59pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/1 "2011-07-27T12:59:53Z")
Bought these a few years ago on Honda-Tech, and they have sat in the box ever since. Previous owner used for 2 dyno pulls, before being switched out for 1000cc’s. **$100 for all four** Current Retail = $50/ea ![http://i.imgur.com/C5Rn1.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/e/2/e2d4accead82cdb95397470cf53ae9f112c195b9.jpeg) ![http://i.imgur.com/XnbxX.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/e/de2410bce79bcdb0d12da3ac4aac5f40dc788c56.jpeg) ![http://i.imgur.com/Kqnsu.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/9/1/91504d9f800be58aa42673f3c10c3ec18d30477d.jpeg) ![http://i.imgur.com/hjsQ9.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/7/8/78cb25706dde2c73d0ef5f185140669ffc5055da.jpeg) \*I can take more pics if necessary > [@SiemensDeka.com | Muscle Motors Distributors](#): > > Features: > Genuine, reliable Siemens Injectors > Excellent response characteristics > Robust Design > High Impedance > Low Impedance performance characteristics with High Impedance Compatibility > > Specifications: > Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required) > Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min > Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min > Gain: 0.11ms/mg > Offset: 0.055ms > Turn on time @ 14VDC: 1.14ms > Turn off time: 0.85ms @ 600KPa > Connector: Bosch EV1 > Series: DEKA 4 ( DEKA IV ) > Orifice Type: Multi-orifice > Spray Pattern: 30 Degree Spray Cone > Factory fitted with Viton upper and lower o-rings > > Equivalent Part Numbers: > Siemens FI114961 or 107-961 ( 107961 ) > Mototron INJ-GAS-006 ( L107) > Accel 74620L > MSD / Edge 2030 - > [@SiemensDeka.com | Muscle Motors Distributors](#): > > These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. > > These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. > > Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow. > > The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6 / USCAR connector as Part Number MOTR-04557. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors! ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [July 27, 2011, 6:54pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/2 "2011-07-27T18:54:59Z")
How would I find out if these would fit my engine? ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 27, 2011, 10:15pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/3 "2011-07-27T22:15:10Z")
> [@Sexual Intercourse with a Friend's Sister???](https://forums.speedlife.net/t/sexual-intercourse-with-a-friends-sister/44232/6): > > How would I find out if these would fit my engine? the wont work for you. ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [July 29, 2011, 3:57pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/4 "2011-07-29T15:57:28Z")
> [@FS: Golden Eagle Block Guard \*Brand New\*](https://forums.speedlife.net/t/fs-golden-eagle-block-guard-brand-new/43980/8): > > the wont work for you. How so? Jumper harnesses exist, I know that much. I just wonder if the nominal diameter is the same? ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 29, 2011, 4:02pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/5 "2011-07-29T16:02:26Z")
> [@FS:mac tools and others](https://forums.speedlife.net/t/fs-mac-tools-and-others/41830/3): > > How so? Jumper harnesses exist, I know that much. I just wonder if the nominal diameter is the same? dont the Evos take low-z injectors? these are high-z so you would need a tune before the would run. why wouldnt you just but the ones made for, and sold for your car? ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [July 29, 2011, 7:37pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/6 "2011-07-29T19:37:09Z")
Cuz they cost lotz of moneyz. This seemed like a good deal. And since I’m getting a tune anyways, it seemed smart. ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [July 29, 2011, 9:14pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/7 "2011-07-29T21:14:17Z")
> [@Mk4 30R"](#): > > dont the Evos take low-z injectors? > > these are high-z so you would need a tune before the would run. > > why wouldnt you just but the ones made for, and sold for your car? Evo X = high-Z brah. Not much of an upgrade though, stock X injector flow test below. 550cc/min @43.5psi - 3bar 660cc/min @51.7psi - 3.5bar 700cc/min @55psi - just over 3.5bar 720cc/min @58psi - 4bar ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [July 30, 2011, 9:34am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/8 "2011-07-30T09:34:34Z")
Stock injectors max out at 26psi… ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [July 30, 2011, 11:36am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/9 "2011-07-30T11:36:58Z")
??? He’s talking fuel pressure ---
**Author:** ![imported\_ST4TUS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_st4tus/32/6290_2.png) [@imported\_ST4TUS](https://forums.speedlife.net/u/imported_ST4TUS)\ **Post date:** [August 1, 2011, 7:08am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/10 "2011-08-01T07:08:56Z")
Just did some reading on these- they will also fit the Genesis, and the length (o-ring2o-ring) has been confirmed to fit evoX. ErnGotti- all you would need is the cheap harness conversion from ATPturbo **$100 FIRM** ---
**Author:** ![imported\_ST4TUS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_st4tus/32/6290_2.png) [@imported\_ST4TUS](https://forums.speedlife.net/u/imported_ST4TUS)\ **Post date:** [August 26, 2011, 11:33am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/11 "2011-08-26T11:33:21Z")
ttt ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [August 26, 2011, 8:11pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/12 "2011-08-26T20:11:36Z")
> [@FS: My car](https://forums.speedlife.net/t/fs-my-car/44276/15): > > Just did some reading on these- they will also fit the Genesis, and the length (o-ring2o-ring) has been confirmed to fit evoX. > > ErnGotti- all you would need is the cheap harness conversion from ATPturbo > > **$100 FIRM** Whats the website? ---
**Author:** ![b-ri](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/b-ri/32/6376_2.png) [@b-ri](https://forums.speedlife.net/u/b-ri)\ **Post date:** [August 31, 2011, 6:29am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/13 "2011-08-31T06:29:06Z")
> [@SOLD: 1991 Talon TSi AWD](https://forums.speedlife.net/t/sold-1991-talon-tsi-awd/44765/24): > > Whats the website? > **[ATP TURBO - The Premiere Provider of Turbocharging Components](http://www.atpturbo.com/)** > > Advanced Tuning Products or ATP Turbo offers aftermarket turbo solutions and engine tuning accessories for high performance cars. ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [September 1, 2011, 6:41am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/14 "2011-09-01T06:41:13Z")
$10/APIECE not bad… ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [September 2, 2011, 9:07pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/15 "2011-09-02T21:07:55Z")
I’m very interested. If someone would purchase my FMIC I will snatch these up ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [September 2, 2011, 9:15pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/16 "2011-09-02T21:15:58Z")
Jdans, these woek for me? ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [September 2, 2011, 9:20pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/17 "2011-09-02T21:20:36Z")
Maybe? Not sure about the height. ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [September 2, 2011, 9:25pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/18 "2011-09-02T21:25:37Z")
Your current ones have those gay projected tips? ---
**Author:** ![imported\_ST4TUS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_st4tus/32/6290_2.png) [@imported\_ST4TUS](https://forums.speedlife.net/u/imported_ST4TUS)\ **Post date:** [September 5, 2011, 6:00am UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/19 "2011-09-05T06:00:06Z")
I’ll take 80$ and deliver within reason, today. Cnt believe I still have these after all the pm’s ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [September 5, 2011, 12:16pm UTC](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646/20 "2011-09-05T12:16:31Z")
I stillllll want theseeeeee damn brakes soakin my moneyz [Next page](https://forums.speedlife.net/t/fs-siemens-deka-630cc-60lbs-hr/259646.md?page=2)