# FS:Spacers, 350z wheels, polished SR coldpipes, Brembos, 17" Tires PICS **URL:** \ **Category:** Classifieds\ **Created:** [August 1, 2008, 5:44am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405 "2008-08-01T05:44:57Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [August 1, 2008, 5:44am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/1 "2008-08-01T05:44:57Z")
i have two pairs of spacers, one is 5 lug, 10mm BINGS but is not the universal 4/5 lug that i make now, this was a pre-prodcution version that i’ve had sitting around. perfectly hub centric for nissan… 6061 aluminum, anodized… made in Canada $55 shipped. ![http://www.bings.ca/images/parts/5%20lug%20spacers.jpg](http://www.bings.ca/images/parts/5%20lug%20spacers.jpg) second i have a universal pair of blue anodized aluminum 4 lug spacers… they are from a Touge Factory set that i had 3-4 years ago… they are 5mm… they will fit 4 x 100, 4 x 114.3 and another 4 lug pattern i havent measured. $40 shipped ![http://www.bings.ca/images/parts/TF%204%20lug%20spacers.jpg](http://www.bings.ca/images/parts/TF%204%20lug%20spacers.jpg) – I just replaced the clutch in my SR and have some other SR parts left over. The clutch is a rebuilt SPEC stage 3. I had Eurodrive rebuild it 2-3 years ago and just 2 weeks ago on the track it slipped a couple times at the top of 3rd. My car was last dyno’d at 325whp, so for a lesser power SR it should hold fine. Also a good candidate for another rebuild. It is a 6 puck sprung clutch. i can have pics up later, im at work now, so maybe tomorrow. **$100** for the clutch disk and pressure plate. SPEC or OEM (OEM one is usable) * * * SR starter Starter of the engine set i picked up. For some reason it stayed engaged when the motor was running so we put the one from my old engine on. This could be an easy fix or good candidate for rebuilt. **$40** * * * Stock SR20 manifold **$50** * * * ## ![http://www.bings.ca/images/parts/used%20SR%20parts.jpg](http://www.bings.ca/images/parts/used%20SR%20parts.jpg) S13 SR coldpipes from kits i seperated for guys… scrap your janky coldpipes for these. **1 left** ![http://www.bings.ca/images/parts/s13%20SR%20coldpipes.jpg](http://www.bings.ca/images/parts/s13%20SR%20coldpipes.jpg) $60 ea. * * * Non-Hicas Subframe with Open Diff… missing an LCA and i need an axle off it too for my own car. $150, no pics * * * Brembo Blanks /// 4 lug ![http://www.bings.ca/images/parts/rotors%20004.jpg](http://www.bings.ca/images/parts/rotors%20004.jpg) $180 obo… all 4 corners – 350z Wheels 18 x 8 +30 ![http://www.bings.ca/images/parts/350z%20wheels.jpg](http://www.bings.ca/images/parts/350z%20wheels.jpg) $450 rashed up a bit, more details here: [http://www.son240sx.org/forums/showthread.php?t=40086](http://www.son240sx.org/forums/showthread.php?t=40086) – TIRES TIRES TIRES go here: [http://www.son240sx.org/forums/showthread.php?t=41381](http://www.son240sx.org/forums/showthread.php?t=41381) OTHER 2.75 - 3" transitions… $15 each, i have like 8-10 for some reason. Stock Coupe tailights… $30 SOLD: SR20 63 ECU USed Bings Lip Aluminum Rad Vogtland Springs Z32 rotors Ricer Tails Coupe trunk V-band clamps SR harness 1 coldpipe ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [August 10, 2008, 1:57pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/2 "2008-08-10T13:57:02Z")
updated thread with a whole bunch of stuff that i have sitting around… need to get rid of some of it. i’ll have even more when i go through my old warehouse. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [August 30, 2008, 3:25pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/3 "2008-08-30T15:25:06Z")
sold the lip, rad and ECU… i’ll update with more stuff in the not so distant future… need to trim the random stuff i have sitting around. ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [September 1, 2008, 12:04am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/4 "2008-09-01T00:04:54Z")
hot pipes? ---
**Author:** ![johnstonanthony](https://avatars.discourse-cdn.com/v4/letter/j/258eb7/32.png) [@johnstonanthony](https://forums.speedlife.net/u/johnstonanthony)\ **Post date:** [September 10, 2008, 7:30am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/5 "2008-09-10T07:30:24Z")
want those z32 rotors if you still have them. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [September 10, 2008, 8:28am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/6 "2008-09-10T08:28:39Z")
yeah i still have the rotors… and peter… you should have told me you wanted a hotpipe, i could have brought it to the Nissan meet last week ---
**Author:** ![jlee](https://avatars.discourse-cdn.com/v4/letter/j/898d66/32.png) [@jlee](https://forums.speedlife.net/u/jlee)\ **Post date:** [September 13, 2008, 1:55pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/7 "2008-09-13T13:55:21Z")
hey bing… i’ll take the 2.5" 90 degree coupler. i’ll talk to you on msn about pick up. Jon ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [September 13, 2008, 6:09pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/8 "2008-09-13T18:09:30Z")
it would be easier for me to ship them… shipping is like $15 and the gas and time would be 2-3 times that. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [October 8, 2008, 7:58am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/9 "2008-10-08T07:58:06Z")
bump… need some of this stuff gone… gotta clean out garage while im on vacation. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 29, 2008, 7:41pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/10 "2008-11-29T19:41:57Z")
pretty much all this stuff is still around ---
**Author:** ![DRFT\_Jeff](https://avatars.discourse-cdn.com/v4/letter/d/bc79bd/32.png) [@DRFT\_Jeff](https://forums.speedlife.net/u/DRFT_Jeff)\ **Post date:** [November 29, 2008, 8:20pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/11 "2008-11-29T20:20:10Z")
interested in lowering springs for s14. how much to ship to barrie or meet in TO ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 29, 2008, 8:25pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/12 "2008-11-29T20:25:58Z")
$160 shipped… i’m feeling generous and need the space. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [December 28, 2008, 8:42pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/13 "2008-12-28T20:42:54Z")
consolidating some threads… some stuff sold this week, some stuff added. i am sure i will add more as i dig through the garage… any interesting trade offers are welcomed… i could use a laptop for the wife, canadian tire gift cards (discounted) etc. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [January 13, 2009, 6:45pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/14 "2009-01-13T18:45:32Z")
ricer tails are sold. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [January 18, 2009, 8:08pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/15 "2009-01-18T20:08:06Z")
sold a couple things this week… linked the tires into the main post. buy this shit, i dont want it. ---
**Author:** ![HayMakr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/haymakr/32/5738_2.png) [@HayMakr](https://forums.speedlife.net/u/HayMakr)\ **Post date:** [January 19, 2009, 2:36am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/16 "2009-01-19T02:36:05Z")
clutch still available? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [January 19, 2009, 5:19am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/17 "2009-01-19T05:19:10Z")
yup… make me an offer kyle… take all the clutch stuff, have hte SPEC rebuilt by Eurodrive in Burlington… i had it done for $200 i think… ripped pretty hard for a couple years. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 7, 2009, 3:20pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/18 "2009-02-07T15:20:27Z")
updated thread… SR harness and a coldpipe were sold as well as some of the 17" tires… but i dont think i had listed the 17’s that i sold anyways… i only have 1 S13 SR coldpipe left… ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [February 14, 2009, 8:01am UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/19 "2009-02-14T08:01:04Z")
updated thread with some spacers. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 6, 2009, 8:33pm UTC](https://forums.speedlife.net/t/fs-spacers-350z-wheels-polished-sr-coldpipes-brembos-17-tires-pics/117405/20 "2009-03-06T20:33:55Z")
Toyo tires and Falken tires (235/40/17) sold… still have the R-comps and the Falken FK-452 in 275