# FS: Spec V Header/Exhaust Pipe **URL:** \ **Category:** Classifieds\ **Created:** [January 6, 2007, 6:45pm UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542 "2007-01-06T18:45:19Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [January 6, 2007, 6:45pm UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/1 "2007-01-06T18:45:19Z")
I’m selling my SS Autochrome Header, my custom 2.5" exhaust piping (done by Park Muffler header to exhaust tip), my magnaflow axleback dual tip exhaust, and my AEM cold air intake. Prices are as follows: Header: _Sold_ Piping: 125$ (just under 200$ for the piping, labour cost me another arounds 100$) Axleback exhaust: _Sold_ AEM Cold Air Intake: _Sold_ The exhaust piping we had to cut just after a weld to get it out. But that won’t be too hard to reweld. Those prices are fairly firmish. But PM with offers. I’ll post detailed pictures tomorrow. ---
**Author:** ![Blackout-Spec](https://avatars.discourse-cdn.com/v4/letter/b/9fc29f/32.png) [@Blackout-Spec](https://forums.speedlife.net/u/Blackout-Spec)\ **Post date:** [January 7, 2007, 12:59am UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/2 "2007-01-07T00:59:29Z")
i already clamed the header. remember! u were going to check it out for cracks… plus do i get the gasket that came with it or will i need a new 1? and 02 sim also?? ---
**Author:** ![altimaman](https://avatars.discourse-cdn.com/v4/letter/a/b782af/32.png) [@altimaman](https://forums.speedlife.net/u/altimaman)\ **Post date:** [January 7, 2007, 10:42am UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/3 "2007-01-07T10:42:38Z")
i know i don’t have a spec but i want the axle back ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [January 7, 2007, 10:43am UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/4 "2007-01-07T10:43:54Z")
Alrighty, here’s the story. I had a few people asking about these items, and I forgot who they were. So I just decided to post a for sale thread. The header needs a gasket (mine was still pretty good so it’s under my turbo manifold now), you can order an o2 spacer off of thevboard somewhere… Can’t remember I’ll try and track that down for you. There are no cracks or stress fractures anywhere on the header. I have my rubber hangers for the exhaust/piping, so you’re going to have to reuse your old ones that should be there alrdy. As you can see everything will need a wash. Here’s pictures of everything. Click any of these pictures for a full screen view. Header top view. [![http://img1.putfile.com/thumb/1/613384482.jpg](http://img1.putfile.com/thumb/1/613384482.jpg)](http://www.putfile.com/pic.php?img=4455389)\ Header bottom view. [![http://img1.putfile.com/thumb/1/613384430.jpg](http://img1.putfile.com/thumb/1/613384430.jpg)](http://www.putfile.com/pic.php?img=4455388) AEM CAI (it will come with the clamps, the old clamps are on my intercooler piping. I’m replacing them with some better clamps here soon) [![http://img1.putfile.com/thumb/1/613384154.jpg](http://img1.putfile.com/thumb/1/613384154.jpg)](http://www.putfile.com/pic.php?img=4455384) Piping resonator. [![http://img1.putfile.com/thumb/1/613384525.jpg](http://img1.putfile.com/thumb/1/613384525.jpg)](http://www.putfile.com/pic.php?img=4455390) Piping cut point. [![http://img1.putfile.com/thumb/1/613384223.jpg](http://img1.putfile.com/thumb/1/613384223.jpg)](http://www.putfile.com/pic.php?img=4455385) Muffler top. [![http://img1.putfile.com/thumb/1/613384371.jpg](http://img1.putfile.com/thumb/1/613384371.jpg)](http://www.putfile.com/pic.php?img=4455387) Muffler bottom. [![http://img1.putfile.com/thumb/1/613384369.jpg](http://img1.putfile.com/thumb/1/613384369.jpg)](http://www.putfile.com/pic.php?img=4455386) Piping mocked out. [![http://img1.putfile.com/thumb/1/613432338.jpg](http://img1.putfile.com/thumb/1/613432338.jpg)](http://www.putfile.com/pic.php?img=4455418) ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [January 7, 2007, 10:51am UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/5 "2007-01-07T10:51:49Z")
On thevboard you can pm graymulligan for an o2 spacer. At least you could back when I was putting my header on back in September. 15$ or something shipped is what I paid. Nice an easy to install (after you finish the hellish task of removing your old o2 sensor from the stock header…) just screw into the spacer then screw the sensor/spacer into the 2nd bung. Might have to reset you SES lights a couple times before it’ll stay off. Give me PMs with offers/phone numbers… I wanna get this shit outta my garage asap! ---
**Author:** ![Bmason](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@Bmason](https://forums.speedlife.net/u/Bmason)\ **Post date:** [January 8, 2007, 4:58pm UTC](https://forums.speedlife.net/t/fs-spec-v-header-exhaust-pipe/145542/6 "2007-01-08T16:58:53Z")
Still have the piping if anyone wants. Please send pm.