# FS: SR20 block and tranny 600$ OBO

**URL:** https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643
**Category:** Classifieds
**Created:** [April 13, 2008, 12:33am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643 "2008-04-13T00:33:47Z")
**Posts on this page:** 10
**Page:** 1

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [April 13, 2008, 12:33am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/1 "2008-04-13T00:33:47Z")

</div>

**Asking Price** : $ 600(OBO)  
**Condition** :Used  
**Location** : St. Catharines, Ontario  
**Will Ship?** :N  
**Contact Info** : Send PM for contact details and to schedule a meet

**Description** : Early Model Redtop. Km unknown. Compression test:  
#1(150) #2(150) #3(140) #4(90) So obviously #4 is the culprit. Bare block with internals and afew sensors and a tranny that needs syncro work, no clutch.  
600$ OBO motor still ran fine before it was recently pulled.  
P.S great for a SR BUILD UP

---

<div class="post-metadata">

### Author: ![cvm07](https://avatars.discourse-cdn.com/v4/letter/c/a88e57/32.png) [@cvm07](https://forums.speedlife.net/u/cvm07)
#### Post date: [April 13, 2008, 9:34am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/2 "2008-04-13T09:34:49Z")

</div>

How much for just the just the block, Pan to head. No bolt ons?

Thanks,

---

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [April 13, 2008, 9:43am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/3 "2008-04-13T09:43:57Z")

</div>

Hey im guessing you mean no tranny just block no sensors or anything. Lets say 450 OBO let me kno. The motor still runs lol, i drove it tooo the shop to get it removed i didnt even notice any power loss. If it wasnt for a Bobbys surprise compression test i would have never known. Im pretty sure it just needs the rings done on #4 an you should be good to go.

---

<div class="post-metadata">

### Author: ![CrypticNissan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crypticnissan/32/5663_2.png) [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)
#### Post date: [April 13, 2008, 10:04am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/4 "2008-04-13T10:04:13Z")

</div>

having a slow drop to 3rd and fouth cyl… might just be your head gasket.

---

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [April 13, 2008, 3:27pm UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/5 "2008-04-13T15:27:09Z")

</div>

> [@A few pics from Norwalk Raceway](https://forums.speedlife.net/t/a-few-pics-from-norwalk-raceway/16585/18):
>
> having a slow drop to 3rd and fouth cyl… might just be your head gasket.

I thought that at first, but then there was blow by. You kno the little breather you put on the valve cover, well that came off and oil had sprayed on my IC piping and valve cover. So the oil is gettin above the 4th cyclinder becuase thats the only one that had the filthy spark plug.

---

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [July 2, 2008, 9:15pm UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/6 "2008-07-02T21:15:48Z")

</div>

BUMP motor still runs. Price is OBO make me an offer.

---

<div class="post-metadata">

### Author: ![DRFT\_Jeff](https://avatars.discourse-cdn.com/v4/letter/d/bc79bd/32.png) [@DRFT\_Jeff](https://forums.speedlife.net/u/DRFT_Jeff)
#### Post date: [July 4, 2008, 6:43pm UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/7 "2008-07-04T18:43:54Z")

</div>

might be stupid q. but is this a turbo sr or non

---

<div class="post-metadata">

### Author: ![DRFT\_Jeff](https://avatars.discourse-cdn.com/v4/letter/d/bc79bd/32.png) [@DRFT\_Jeff](https://forums.speedlife.net/u/DRFT_Jeff)
#### Post date: [July 4, 2008, 6:45pm UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/8 "2008-07-04T18:45:08Z")

</div>

oops sorry didnt read the next post. so it doesnt come with exhaust mani or intake mani?

---

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [July 5, 2008, 12:59am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/9 "2008-07-05T00:59:08Z")

</div>

No its pretty much bare block with exception of pullies.

---

<div class="post-metadata">

### Author: ![ls6s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ls6s13/32/5657_2.png) [@ls6s13](https://forums.speedlife.net/u/ls6s13)
#### Post date: [July 29, 2008, 10:14am UTC](https://forums.speedlife.net/t/fs-sr20-block-and-tranny-600-obo/114643/10 "2008-07-29T10:14:55Z")

</div>

Bump
