# FS stahl Converter 2000rpm TH350-882 heads SBC

**URL:** <https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019>\
**Category:** Classifieds\
**Created:** [December 31, 2007, 9:47am UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019 "2007-12-31T09:47:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pauly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pauly/32/7493_2.png) [@Pauly](https://forums.speedlife.net/u/Pauly)\
**Post date:** [December 31, 2007, 9:47am UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/1 "2007-12-31T09:47:58Z")

</div>

I have a used (approx 1,800 miles) summit torque converter 2000-2200 rpm(SUM G2702)for a TH350 trans. Looking for $50.00

Set of 70’s SBC 882 heads 1.94 intake valves new guides 3 angle valve job they are Bare( i might be able to dig up the valves) $50.00

SBC performer RPM intake has a small chunk out of corner (will still seal fine) $40.00

---

<div class="post-metadata">

**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\
**Post date:** [January 1, 2008, 9:46am UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/2 "2008-01-01T09:46:20Z")

</div>

20 on the intake

---

<div class="post-metadata">

**Author:** ![Pauly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pauly/32/7493_2.png) [@Pauly](https://forums.speedlife.net/u/Pauly)\
**Post date:** [January 1, 2008, 1:32pm UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/3 "2008-01-01T13:32:28Z")

</div>

Nice try dirtye30, but no. How about 35?

---

<div class="post-metadata">

**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\
**Post date:** [January 1, 2008, 7:30pm UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/4 "2008-01-01T19:30:10Z")

</div>

what corner is the defect on?

---

<div class="post-metadata">

**Author:** ![Pauly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pauly/32/7493_2.png) [@Pauly](https://forums.speedlife.net/u/Pauly)\
**Post date:** [January 2, 2008, 5:45am UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/5 "2008-01-02T05:45:08Z")

</div>

right rear i’ll take a pic later if ya want

---

<div class="post-metadata">

**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\
**Post date:** [January 2, 2008, 9:14am UTC](https://forums.speedlife.net/t/fs-stahl-converter-2000rpm-th350-882-heads-sbc/41019/6 "2008-01-02T09:14:13Z")

</div>

plzdo