# FS: Upper AEM Intake from Spec V

**URL:** <https://forums.speedlife.net/t/fs-upper-aem-intake-from-spec-v/146366>\
**Category:** Classifieds\
**Created:** [April 8, 2007, 3:28pm UTC](https://forums.speedlife.net/t/fs-upper-aem-intake-from-spec-v/146366 "2007-04-08T15:28:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![hampstor](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@hampstor](https://forums.speedlife.net/u/hampstor)\
**Post date:** [April 8, 2007, 3:28pm UTC](https://forums.speedlife.net/t/fs-upper-aem-intake-from-spec-v/146366/1 "2007-04-08T15:28:49Z")

</div>

I’ve got the upper part of the cold air intake from a Sentra SE-R Spec V (AEM). It’s the pipe that goes from the manifold to the MAF.

It includes all the clamps/hoses/couplers(in original unopened bag) including the MAF adapter. If wanted, Ill give you a used filter too - though you should be buying a new one anyway 🙂

The reason I have it, my wife’s car was in an accident and the lower part of the intake was crushed. We had to buy the entire CAI, but all we need was the lower pipe and the filter (why not replace the filter while we were at it!). Figure maybe someone can use it, otherwise it will collect dust.

$40 OBO - located in Calgary.

---

<div class="post-metadata">

**Author:** ![hampstor](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@hampstor](https://forums.speedlife.net/u/hampstor)\
**Post date:** [April 17, 2007, 6:24pm UTC](https://forums.speedlife.net/t/fs-upper-aem-intake-from-spec-v/146366/2 "2007-04-17T18:24:26Z")

</div>

bump?

---

<div class="post-metadata">

**Author:** ![hampstor](https://avatars.discourse-cdn.com/v4/letter/h/ea666f/32.png) [@hampstor](https://forums.speedlife.net/u/hampstor)\
**Post date:** [April 24, 2007, 7:15am UTC](https://forums.speedlife.net/t/fs-upper-aem-intake-from-spec-v/146366/3 "2007-04-24T07:15:09Z")

</div>

bump - no takers? it has the maf adapter…