# FS: White S13 Part Out- Barrie, Ontario **URL:** \ **Category:** Classifieds\ **Created:** [May 19, 2010, 4:41pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283 "2010-05-19T16:41:37Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [May 19, 2010, 4:41pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/1 "2010-05-19T16:41:37Z")
All parts must go… as soon as possible…send me offers obo everything Drivers and passenger side doors 25.00 each no door panels Left and Right Headlights 100.00 for pair water pump with clutch fan 40 rad 40.00 New alternator for 120 firm. installed a week, used 4 to 6 hours. KYB GR-2 with green tein lowering springs- 200 Strut tower bars- 40 AEM cold air intake with 93 maf - 75 Front calipers- 40 for pair Spare driver side window- 20 dollars spare headlight motors- 20 dollars spare drive side window motor- 25 dollars Fuel tank and sending unit- 80 dollars 2 mint condition winter tires- 150 for both selling as pair power steering pump w/reservoir- 25 dollars seats front and rear - front 25 dollars each with rear 70 dollars. Spark plug wires- 40 dollars Hatch in good condition. painted white, minor rust around taillight- 100 dollars fenders driver side and passenger side- 40 dollars each. taillights and garnish- 50 dollars all interior want to sell together as a whole 120.00 dollars dash, door panels, rear panels, center consol Carpet is no good, please dont ask. For any other parts just pm me or you can e-mail me at [corey-leigh@hotmail.com](mailto:corey-leigh@hotmail.com) Pictures have been included ---
**Author:** ![Luis240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luis240sx/32/5530_2.png) [@Luis240sx](https://forums.speedlife.net/u/Luis240sx)\ **Post date:** [May 19, 2010, 5:16pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/2 "2010-05-19T17:16:45Z")
if its a wingless hatch im interested… also in the ps pump, res and lines if its a non hicas ? ---
**Author:** ![jry77](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@jry77](https://forums.speedlife.net/u/jry77)\ **Post date:** [May 19, 2010, 8:22pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/3 "2010-05-19T20:22:08Z")
what year are the fenders off of? ---
**Author:** ![codyne](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/codyne/32/5629_2.png) [@codyne](https://forums.speedlife.net/u/codyne)\ **Post date:** [May 19, 2010, 8:34pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/4 "2010-05-19T20:34:48Z")
^lol wut. ---
**Author:** ![madchild626](https://avatars.discourse-cdn.com/v4/letter/m/d07c76/32.png) [@madchild626](https://forums.speedlife.net/u/madchild626)\ **Post date:** [May 19, 2010, 8:56pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/5 "2010-05-19T20:56:36Z")
it looks like someone dosen’t know what s13 fenders look like ---
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [May 19, 2010, 11:20pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/6 "2010-05-19T23:20:44Z")
lol the car is a 1993 or an s13 to others from 89 to 94 mine just had the better styled bumper ---
**Author:** ![Slikzzz](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@Slikzzz](https://forums.speedlife.net/u/Slikzzz)\ **Post date:** [May 20, 2010, 6:18am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/7 "2010-05-20T06:18:09Z")
any pictures of the strut tower bar and hatch? ill come pick up the hatch tomorrow ---------- Post added at 09:18 AM ---------- Previous post was at 09:15 AM ---------- il take the aem intake to ---
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [May 21, 2010, 12:07am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/8 "2010-05-21T00:07:23Z")
more pictures included…if more pictures are wanted of what either pm me or e-mail me at [corey-leigh@hotmail.com](mailto:corey-leigh@hotmail.com) ---
**Author:** ![Sato\_Tatsuya](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Sato\_Tatsuya](https://forums.speedlife.net/u/Sato_Tatsuya)\ **Post date:** [May 21, 2010, 7:08am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/9 "2010-05-21T07:08:46Z")
hey, I was wondering if your “interior combo” include the seats?? Also, just curious about the condition of the seats? Thanks! ---
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [May 21, 2010, 7:41am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/10 "2010-05-21T07:41:26Z")
the seats arent included but for 20 dollars i will throw them in also. the passenger side is in good condition but the driver side seat has lost the tweed on that spots from always getting in and out ---
**Author:** ![jugahdor](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@jugahdor](https://forums.speedlife.net/u/jugahdor)\ **Post date:** [May 21, 2010, 5:12pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/11 "2010-05-21T17:12:26Z")
do you have a full exhaust system for a kade??? and is the hatch still for sale? ---
**Author:** ![Ciaran](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ciaran/32/5612_2.png) [@Ciaran](https://forums.speedlife.net/u/Ciaran)\ **Post date:** [May 21, 2010, 7:38pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/12 "2010-05-21T19:38:15Z")
> [@codyne](#): > > ^lol wut. to be fair, pignose fenders ARE quite a bit different from chuki fenders ---
**Author:** ![D4NN](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@D4NN](https://forums.speedlife.net/u/D4NN)\ **Post date:** [May 22, 2010, 11:34am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/13 "2010-05-22T11:34:44Z")
spare drive side window motor- 25 dollars How much shipped to Montreal? I’m **_very_** interested. Please PM me. ---
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [May 22, 2010, 12:08pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/14 "2010-05-22T12:08:28Z")
i will check out the pricing of shipping to montreal, it isnt just the motor but all so the whole assembly…do you just want the motor ---
**Author:** ![240sxhicas](https://avatars.discourse-cdn.com/v4/letter/2/df788c/32.png) [@240sxhicas](https://forums.speedlife.net/u/240sxhicas)\ **Post date:** [May 22, 2010, 9:22pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/15 "2010-05-22T21:22:43Z")
interested in doors still avaliable pic if possilbe thankyou ---
**Author:** ![faulk\_2p](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/faulk_2p/32/5745_2.png) [@faulk\_2p](https://forums.speedlife.net/u/faulk_2p)\ **Post date:** [June 1, 2010, 3:11am UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/16 "2010-06-01T03:11:37Z")
car has been sold…alternator left 80 dollars ---
**Author:** ![jdmfever](https://avatars.discourse-cdn.com/v4/letter/j/96bed5/32.png) [@jdmfever](https://forums.speedlife.net/u/jdmfever)\ **Post date:** [April 25, 2011, 4:40pm UTC](https://forums.speedlife.net/t/fs-white-s13-part-out-barrie-ontario/155283/17 "2011-04-25T16:40:24Z")
pm me your number im interested in the fuel tank and sending unit … thanks