# FS: Work CR Kai Wheels **URL:** \ **Category:** Classifieds\ **Created:** [July 15, 2004, 2:33pm UTC](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729 "2004-07-15T14:33:10Z")\ **Posts on this page:** 4\ **Page:** 2
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [July 19, 2004, 12:15pm UTC](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729/21 "2004-07-19T12:15:15Z")
Ummmm, well, make an offer and I’ll bring it to his attention. They are just as wide as my wheels, and I’m running 215/40 on the front and 235/40 on the rear. You could probably go slightly wider in the rear, but that would be up to you. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [July 19, 2004, 6:58pm UTC](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729/22 "2004-07-19T18:58:16Z")
pm’d also do these need special lug nuts or no and need any spacer to fit flush? or clear z brakes? ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [July 20, 2004, 1:06am UTC](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729/23 "2004-07-20T01:06:23Z")
They come with all of the wheel nuts, and valve stems. They will fit very flush, as I am also happy with my wheels and their “flushness” and they are the same offset. I beleive they will fit the Z brakes, if not, a very very small spacer needed. I beleive they should fit. ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [July 28, 2004, 6:20pm UTC](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729/24 "2004-07-28T18:20:09Z")
SOLD! [Previous page](https://forums.speedlife.net/t/fs-work-cr-kai-wheels/137729.md?page=1)