# Fuse help

**URL:** <https://forums.speedlife.net/t/fuse-help/146338>\
**Category:** Canada Nissan Automotive\
**Created:** [April 5, 2007, 12:56pm UTC](https://forums.speedlife.net/t/fuse-help/146338 "2007-04-05T12:56:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![eklips3](https://avatars.discourse-cdn.com/v4/letter/e/41988e/32.png) [@eklips3](https://forums.speedlife.net/u/eklips3)\
**Post date:** [April 5, 2007, 12:56pm UTC](https://forums.speedlife.net/t/fuse-help/146338/1 "2007-04-05T12:56:31Z")

</div>

so my friend comes to me asking if i had an idea why his blowers werent working because there is no air comming out of his vents. i say its a fuse so i check.

turns out that the fuse for the blowers was MELTED so i pulled it out … there is a lot of gunk and goo where the fuse is supposed to be.

any suggestions to how i should clean it out ?

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [April 5, 2007, 5:19pm UTC](https://forums.speedlife.net/t/fuse-help/146338/2 "2007-04-05T17:19:36Z")

</div>

an exacto knife

but before you just shove another fuse in there have a look at the wiring, there has to be a reason why a fuse like that melted so badly

---

<div class="post-metadata">

**Author:** ![TopGunn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/topgunn/32/3191_2.png) [@TopGunn](https://forums.speedlife.net/u/TopGunn)\
**Post date:** [April 5, 2007, 9:21pm UTC](https://forums.speedlife.net/t/fuse-help/146338/3 "2007-04-05T21:21:16Z")

</div>

> [@RS13](#):
>
> an exacto knife
> 
> but before you just shove another fuse in there have a look at the wiring, there has to be a reason why a fuse like that melted so badly

Yes, I would say most likely he put in a fuse if it was a recent problem that was too much of an amperage yielding it unsafe and melting the fuse.

Just a thought, check the manual!