# fuses melted into my fuse box!

**URL:** <https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346>\
**Category:** SON240sx Automotive\
**Created:** [September 27, 2009, 2:39pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346 "2009-09-27T14:39:02Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trutrax](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trutrax/32/5658_2.png) [@Trutrax](https://forums.speedlife.net/u/Trutrax)\
**Post date:** [September 27, 2009, 2:39pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/1 "2009-09-27T14:39:02Z")

</div>

what the fuuuuck. two fuses melted into my fuse box. Both the blower motor fuses, melted right in there and I can’t get them out.

What do I do in a situation such as this? How important is the blower motor, and how hard is it to replace the fuse box if needed?

ugh wtf…

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [September 27, 2009, 2:44pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/2 "2009-09-27T14:44:09Z")

</div>

How the hell does this happen. Have you done any tinkering at all with any wiring? Even wiring in a new deck?

---

<div class="post-metadata">

**Author:** ![Trutrax](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trutrax/32/5658_2.png) [@Trutrax](https://forums.speedlife.net/u/Trutrax)\
**Post date:** [September 27, 2009, 2:47pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/3 "2009-09-27T14:47:48Z")

</div>

no, nothing recently. And the fuses them selfs should of gone loooong before any melting took place. My Hvac still works…which is confusing because that’s what I assumed the fuses were for.

---

<div class="post-metadata">

**Author:** ![kollo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kollo/32/5661_2.png) [@kollo](https://forums.speedlife.net/u/kollo)\
**Post date:** [September 27, 2009, 3:04pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/4 "2009-09-27T15:04:07Z")

</div>

paint thinner with batt disconnected it will melt the plastic with in 20min

---

<div class="post-metadata">

**Author:** ![Trutrax](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trutrax/32/5658_2.png) [@Trutrax](https://forums.speedlife.net/u/Trutrax)\
**Post date:** [September 27, 2009, 3:17pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/5 "2009-09-27T15:17:36Z")

</div>

kk, I’ll give it a shot. How much do I need to put on?

---

<div class="post-metadata">

**Author:** ![kollo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kollo/32/5661_2.png) [@kollo](https://forums.speedlife.net/u/kollo)\
**Post date:** [September 27, 2009, 3:26pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/6 "2009-09-27T15:26:48Z")

</div>

use a quetip but applt alot just try not to get it on every thing and clean up the mess when done your best but is assitone then let it sit for 20-25min then pull out with pliers and the plastic should be nice and soft

---

<div class="post-metadata">

**Author:** ![Trutrax](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trutrax/32/5658_2.png) [@Trutrax](https://forums.speedlife.net/u/Trutrax)\
**Post date:** [September 27, 2009, 4:25pm UTC](https://forums.speedlife.net/t/fuses-melted-into-my-fuse-box/128346/7 "2009-09-27T16:25:33Z")

</div>

ok, I managed to save the first blower motor fuse outlet. The second one is done for I think. So my question is, will everything function with only one 15a blower fuse?