# gear install **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [February 16, 2007, 7:31am UTC](https://forums.speedlife.net/t/gear-install/188067 "2007-02-16T07:31:40Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![flyinglow57](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/flyinglow57/32/5978_2.png) [@flyinglow57](https://forums.speedlife.net/u/flyinglow57)\ **Post date:** [February 16, 2007, 7:31am UTC](https://forums.speedlife.net/t/gear-install/188067/1 "2007-02-16T07:31:40Z")
ok i am finally going to purchase some gears for the camaro. i have a t-rex cam and run 315/35/17 tires and have a 6spd tranny in the car. now i need to know what gear i should go with. from what i understand the cam should be mated with 4.56 gears. i am afraid that tihs is a weak gear and the 4.10’s are a little stronger. i am going to have someone set them up that did deans car when he had the 4.10’s with the 10bolt which held up to some rough abuse so hopefully mine does the same. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 7:33am UTC](https://forums.speedlife.net/t/gear-install/188067/2 "2007-02-16T07:33:09Z")
u should be ok with the 4.10s, it will be a huge gain over the gears u have now!!! ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [February 16, 2007, 7:34am UTC](https://forums.speedlife.net/t/gear-install/188067/3 "2007-02-16T07:34:02Z")
410s ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 7:35am UTC](https://forums.speedlife.net/t/gear-install/188067/4 "2007-02-16T07:35:34Z")
4.30s are badass 😉 ---
**Author:** ![85TransAm](https://avatars.discourse-cdn.com/v4/letter/8/e68b1a/32.png) [@85TransAm](https://forums.speedlife.net/u/85TransAm)\ **Post date:** [February 16, 2007, 7:41am UTC](https://forums.speedlife.net/t/gear-install/188067/5 "2007-02-16T07:41:05Z")
4.10’s ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 7:44am UTC](https://forums.speedlife.net/t/gear-install/188067/6 "2007-02-16T07:44:31Z")
well, are u going to be launching it hard a lot? are you goign to build the whole 10 bolt up, or no? if ur just crusing a lot with it, roll racing, and not doing a lot of hard launches on it, go 4.56s ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [February 16, 2007, 8:17am UTC](https://forums.speedlife.net/t/gear-install/188067/7 "2007-02-16T08:17:04Z")
niner’s ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [February 16, 2007, 10:14am UTC](https://forums.speedlife.net/t/gear-install/188067/8 "2007-02-16T10:14:10Z")
no brainer 4.56 ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [February 16, 2007, 10:29am UTC](https://forums.speedlife.net/t/gear-install/188067/9 "2007-02-16T10:29:37Z")
4.11 12 bolt? ---
**Author:** ![2000blackta](https://avatars.discourse-cdn.com/v4/letter/2/54ee81/32.png) [@2000blackta](https://forums.speedlife.net/u/2000blackta)\ **Post date:** [February 16, 2007, 11:19am UTC](https://forums.speedlife.net/t/gear-install/188067/10 "2007-02-16T11:19:34Z")
> [@moving to east amherst](https://forums.speedlife.net/t/moving-to-east-amherst/28098/8): > > ok i am finally going to purchase some gears for the camaro. i have a t-rex cam and run 315/35/17 tires and have a 6spd tranny in the car. > > now i need to know what gear i should go with. from what i understand the cam should be mated with 4.56 gears. i am afraid that tihs is a weak gear and the 4.10’s are a little stronger. > > i am going to have someone set them up that did deans car when he had the 4.10’s with the 10bolt which held up to some rough abuse so hopefully mine does the same. I am still racing on that rear that Dean had set up. I have probably 10 -15 launches on it. It howls like a pissed off wolf but is still holding up well. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 1:06pm UTC](https://forums.speedlife.net/t/gear-install/188067/11 "2007-02-16T13:06:06Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/4536): > > I am still racing on that rear that Dean had set up. I have probably 10 -15 launches on it. It howls like a pissed off wolf but is still holding up well. x2, but ur launching with an automatic, where he is with a 6speed, a couple high launchs with just dumping that clutch, and it might spell disaster for him…kinda like the luck pewter had ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [February 16, 2007, 2:11pm UTC](https://forums.speedlife.net/t/gear-install/188067/12 "2007-02-16T14:11:11Z")
> [@Fixing a damaged oil pan](https://forums.speedlife.net/t/fixing-a-damaged-oil-pan/28113/6): > > x2, but ur launching with an automatic, where he is with a 6speed, a couple high launchs with just dumping that clutch, and it might spell disaster for him…kinda like the luck pewter had i did cut a 1.66 60’ with et streets. never dumped the clutch though. go with 4.10’s ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 2:24pm UTC](https://forums.speedlife.net/t/gear-install/188067/13 "2007-02-16T14:24:27Z")
> [@2002SilverWS-6"](#): > > i did cut a 1.66 60’ with et streets. never dumped the clutch though. > > go with 4.10’s with 10 bolt or 12 bolt? ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [February 16, 2007, 2:32pm UTC](https://forums.speedlife.net/t/gear-install/188067/14 "2007-02-16T14:32:07Z")
> [@DIY Dent Removal](https://forums.speedlife.net/t/diy-dent-removal/28092/2): > > with 10 bolt or 12 bolt? 10 bolt ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [February 16, 2007, 2:34pm UTC](https://forums.speedlife.net/t/gear-install/188067/15 "2007-02-16T14:34:02Z")
> [@FS: NYSpeed Volume 1 DVDs!](https://forums.speedlife.net/t/fs-nyspeed-volume-1-dvds/28111/8): > > 10 bolt damn thats sweet ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [February 16, 2007, 2:35pm UTC](https://forums.speedlife.net/t/gear-install/188067/16 "2007-02-16T14:35:54Z")
> [@Ticket question..v.im dumb](https://forums.speedlife.net/t/ticket-question-v-im-dumb/27218/30): > > damn thats sweet thanks also if it matters 1.73 60’ with bfg’s and 10 bolt ---
**Author:** ![flyinglow57](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/flyinglow57/32/5978_2.png) [@flyinglow57](https://forums.speedlife.net/u/flyinglow57)\ **Post date:** [February 16, 2007, 2:53pm UTC](https://forums.speedlife.net/t/gear-install/188067/17 "2007-02-16T14:53:15Z")
> [@Weak-sause kill, GTP stylez](https://forums.speedlife.net/t/weak-sause-kill-gtp-stylez/28073/10): > > thanks > also if it matters 1.73 60’ with bfg’s and 10 bolt thats what im hoping for is something like that with the nitto drag radials. what was the fastest time you got with cam and the 10bolt with drag radials ??? ---
**Author:** ![2000\_Ultra\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2000_ultra_z/32/6009_2.png) [@2000\_Ultra\_Z](https://forums.speedlife.net/u/2000_Ultra_Z)\ **Post date:** [February 16, 2007, 4:29pm UTC](https://forums.speedlife.net/t/gear-install/188067/18 "2007-02-16T16:29:51Z")
4.56 dont be a pussy 10bolt rear ends are a dime a dozen only reason maters keeped breaking was the rear end breather wasnt big enough and it was building up pressure and poping the seal ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [February 16, 2007, 4:43pm UTC](https://forums.speedlife.net/t/gear-install/188067/19 "2007-02-16T16:43:48Z")
> [@automotive forums in upstate](https://forums.speedlife.net/t/automotive-forums-in-upstate/28117/7): > > 4.56 dont be a pussy 10bolt rear ends are a dime a dozen only reason maters keeped breaking was the rear end breather wasnt big enough and it was building up pressure and poping the seal :boink ---
**Author:** ![yelo69](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yelo69/32/6023_2.png) [@yelo69](https://forums.speedlife.net/u/yelo69)\ **Post date:** [February 16, 2007, 5:26pm UTC](https://forums.speedlife.net/t/gear-install/188067/20 "2007-02-16T17:26:53Z")
How do ya figure 4:10 are stronger than 4:56??? [Next page](https://forums.speedlife.net/t/gear-install/188067.md?page=2)