# Gear set Brand recommendations? (GM 12-Bolt)

**URL:** <https://forums.speedlife.net/t/gear-set-brand-recommendations-gm-12-bolt/271628>\
**Category:** NYSpeed Automotive\
**Created:** [February 6, 2015, 8:46am UTC](https://forums.speedlife.net/t/gear-set-brand-recommendations-gm-12-bolt/271628 "2015-02-06T08:46:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![97FormulaWS-6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/97formulaws-6/32/7384_2.png) [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)\
**Post date:** [February 6, 2015, 8:46am UTC](https://forums.speedlife.net/t/gear-set-brand-recommendations-gm-12-bolt/271628/1 "2015-02-06T08:46:21Z")

</div>

Still slowly working on the Bird… damn life keeps getting in the way, but so be it.

Long story short I pulled the rearend (Strange F-body HD 12-bolt); and pulled it apart for rebuild and powdercoating of the housing. Measured the backlash before I pulled the diff, and found it WAY THE FUCK out of spec. Measured out at 0.015"; spec is 0.007"-0.010". Not good. So it looks like I need a new gear set.

Any recommendations on brands that are better/worse than others? US-Strange? Motive? Richmond? Other?

(As a note, I also found both wheel seals were bad, probably from sitting for 9 years; and a nicely bent aftermarket aluminum PHR! One good thing though, I used Seals-It seals on all the heim-joints (Rod ends) in my rear suspension, and even after 20k of hard road miles, the seals are shot, but the rod ends are still nice and tight!)

---

<div class="post-metadata">

**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\
**Post date:** [February 6, 2015, 11:07am UTC](https://forums.speedlife.net/t/gear-set-brand-recommendations-gm-12-bolt/271628/2 "2015-02-06T11:07:07Z")

</div>

I never use GM rear ends but in Ford I get either OEM of Ford Performance. Is there an OEM og GMPP option?
