# Get Caged at PMP - New Fox body pics! **URL:** \ **Category:** Vendor Marketplace\ **Created:** [March 29, 2007, 12:22pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744 "2007-03-29T12:22:04Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![BaD\_AZz\_Z\_28](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@BaD\_AZz\_Z\_28](https://forums.speedlife.net/u/BaD_AZz_Z_28)\ **Post date:** [May 22, 2007, 10:07am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/61 "2007-05-22T10:07:28Z")
[quote=“97FormulaWS-6,post:60,topic:26744"”] Yea, from what I remember when I met Paul, I’m about his height and have tops… so… I’m defenetly calling u guys when I am ready to do this; probably this fall/winter time. Probably nothing as crazy as Paul’s setup, but at a min a 8pt bar, and if you can do a cage that clean, I’ll probably do that instead just to be safe. [/quote] Well if you stick to an 8pt bar that is good to 10.00s then your ttops wont be an issue because there is no halo bar. If you go up to the 10+ point cage, then there are some options as to how tucked up the roof section can be. Ours are on the extreme end of fabrication time in order to go through the roof and floor, but the options are out there. Each one is bent custom to the car/driver, so it stays as tight as possible. And I’ll get some pictures up of my rear bar section, but its a more low-key setup than Pauls…just a matter of preference, either works. ---
**Author:** ![97FormulaWS-6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/97formulaws-6/32/7384_2.png) [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)\ **Post date:** [May 22, 2007, 10:14am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/62 "2007-05-22T10:14:00Z")
My thoughts there are really dependent on what Motor I want to put together this winter and how crazy I want to get… if I go balls out like I want to, I’m going to need the cage. I figured the time and effort to do a cage the detailed is a lot, I know and understand that. Fitting everything to a driver, position, interior, and tucking it in tight just takes time; bottom line. The good part is you guys have the major “kinks” worked out on your own cars so if/when I ask u to do it to mine there will be less suprises 😉 When I’m ready I’ll get in contact and we can discuss all the options and go from there. ---
**Author:** ![Justin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin/32/7459_2.png) [@Justin](https://forums.speedlife.net/u/Justin)\ **Post date:** [May 22, 2007, 11:03am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/63 "2007-05-22T11:03:02Z")
:tup: Nice work as always. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 22, 2007, 8:05pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/64 "2007-05-22T20:05:06Z")
[quote=“newman,post:51,topic:26744"”] seriously. better than vito’s… i think… [/quote] Are you talking about Vito Antonicelli from [www.antonicelliracecars.com](http://www.antonicelliracecars.com) are you?? ---
**Author:** ![87FOXGT](https://avatars.discourse-cdn.com/v4/letter/8/ecd19e/32.png) [@87FOXGT](https://forums.speedlife.net/u/87FOXGT)\ **Post date:** [May 22, 2007, 9:52pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/65 "2007-05-22T21:52:20Z")
Awesome :tup: I know where im bringing my fox when it comes time to cage it. 😉 I hear you guys are working some miracles with Steve’s Formula as well 😃 I really need to drop by one of these days and shoot the shit, Id like to take a closer look at the fox, and get a pricing estimate for my own car. Nice work guys, keep it up! Looks like you’re definitely staying busy! :headbang: ---
**Author:** ![strokedlx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/strokedlx/32/7220_2.png) [@strokedlx](https://forums.speedlife.net/u/strokedlx)\ **Post date:** [May 23, 2007, 8:51am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/66 "2007-05-23T08:51:26Z")
[quote=“87FOXGT,post:65,topic:26744"”] Id like to take a closer look at the fox [/quote] PM FourEyed, Joe has his car home already. ---
**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\ **Post date:** [July 3, 2007, 10:04pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/67 "2007-07-03T22:04:32Z")
pmed ---
**Author:** ![matter](https://avatars.discourse-cdn.com/v4/letter/m/97f17d/32.png) [@matter](https://forums.speedlife.net/u/matter)\ **Post date:** [July 4, 2007, 3:40am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/68 "2007-07-04T03:40:28Z")
dang, I’d really like a 6pt but Im a big dude, and climbing over those door bars would piss me right the hell off. Plus swingouts I dislike also! Whats the rule about the door bar? I know I have seen pics of a bent door bar before, where it bends down and makes a small angle halfway to allow more “ass-slide” room to get in and out. ---
**Author:** ![BaD\_AZz\_Z\_28](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@BaD\_AZz\_Z\_28](https://forums.speedlife.net/u/BaD_AZz_Z_28)\ **Post date:** [July 4, 2007, 10:24pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/69 "2007-07-04T22:24:51Z")
Door bar rule is that it crosses between your shoulder and elbow in your driving position. Swingouts allowed. We can get it as tight and low for ya as the rules allow. If Paul can get in over them with ease, anyone can. ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [July 5, 2007, 6:50am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/70 "2007-07-05T06:50:13Z")
[quote=“BaD AZz Z/28,post:69,topic:26744"”] If Paul can get in over them with ease, anyone can. [/quote] lol, its funny cause its true. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [September 30, 2007, 6:32pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/71 "2007-09-30T18:32:13Z")
PM sent to Nytrus1 ---
**Author:** ![Inn-Tune](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/inn-tune/32/7588_2.png) [@Inn-Tune](https://forums.speedlife.net/u/Inn-Tune)\ **Post date:** [October 1, 2007, 6:10am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/72 "2007-10-01T06:10:37Z")
Give him a call instead. Calling will get you a quick response if not immediate. THANKS VERY MUCH PAUL for adding door bars to Voltron. Awesome job!!! Now we have a 6 point NHRA legal cage. ---
**Author:** ![slow84ta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slow84ta/32/7265_2.png) [@slow84ta](https://forums.speedlife.net/u/slow84ta)\ **Post date:** [October 1, 2007, 6:26am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/73 "2007-10-01T06:26:26Z")
since you can do swingouts, can you make it so the side bars can be taken out with pins or bolts for street driving? Then just pin/bolt them in when it comes time to racing at the track…:headbang: ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [October 4, 2007, 12:36am UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/74 "2007-10-04T00:36:45Z")
gotta PM reply… AWESOME price for what i was looking for. time to save save save so i can make it happen ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 21, 2008, 12:24pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/75 "2008-07-21T12:24:01Z")
bump, ive sent pm. waiting for response. hopefully there is soemthing that will work for me. ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [July 21, 2008, 12:28pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/76 "2008-07-21T12:28:14Z")
Last Visit nytrus1 — 05-22-2008 ---
**Author:** ![RuBiCaNT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rubicant/32/7622_2.png) [@RuBiCaNT](https://forums.speedlife.net/u/RuBiCaNT)\ **Post date:** [July 21, 2008, 12:36pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/77 "2008-07-21T12:36:37Z")
> [@Nikuk](#): > > Last Visit > nytrus1 — 05-22-2008 :word: Team JnJ ran him out of town… ---
**Author:** ![cky89](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cky89/32/4945_2.png) [@cky89](https://forums.speedlife.net/u/cky89)\ **Post date:** [July 21, 2008, 12:38pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/78 "2008-07-21T12:38:22Z")
JD- give them a call. i was just there the other day ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 21, 2008, 12:39pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/79 "2008-07-21T12:39:06Z")
laaaame. well, we shall see. I tried calling but there was no answer. ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [July 21, 2008, 12:43pm UTC](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744/80 "2008-07-21T12:43:15Z")
> [@RuBiCaNT](#): > > :word: > > Team JnJ ran him out of town… i think it was more his lack of intelligence :gotme: [Previous page](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744.md?page=3) [Next page](https://forums.speedlife.net/t/get-caged-at-pmp-new-fox-body-pics/26744.md?page=5)