# Getting custom headers for the beater.

**URL:** <https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744>\
**Category:** NYSpeed Automotive\
**Created:** [September 26, 2005, 5:38pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744 "2005-09-26T17:38:52Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [September 26, 2005, 5:38pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/1 "2005-09-26T17:38:52Z")

</div>

Anyone that knows of some place that will make headers for a v6. Looking to get some lightweight headers made to replace those cast iron beasts off of Super-Beater, and intergrate them into my existing straight pipes.

And before anyone says “Hybrid” let me reply to that with “Taurus = No”. Although they were nice enough to make me some straight pipes for it, and quite quickly too. :tup:

---

<div class="post-metadata">

**Author:** ![ly555is](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@ly555is](https://forums.speedlife.net/u/ly555is)\
**Post date:** [September 26, 2005, 7:03pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/2 "2005-09-26T19:03:52Z")

</div>

(devin which car do you mean, not everyone knows what you drive) 🙂

---

<div class="post-metadata">

**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\
**Post date:** [September 26, 2005, 7:06pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/3 "2005-09-26T19:06:29Z")

</div>

im sure somebody makes some… why not just buy them

for anybody to make headers they would need a flange to start off with…

---

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [September 26, 2005, 7:19pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/4 "2005-09-26T19:19:56Z")

</div>

Wouldn’t that be nice if SHOs had an aftermarket.

Trust me NOBODY, and I mean **NOBODY** , makes headers for a SHO. I think a grand total of 10 custom headers made in the late 90s. And if there was such a thing I would have already done it, instead of spending extra to have it done. :tdown:

---

<div class="post-metadata">

**Author:** ![rj-92](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rj-92/32/7310_2.png) [@rj-92](https://forums.speedlife.net/u/rj-92)\
**Post date:** [September 26, 2005, 7:29pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/5 "2005-09-26T19:29:44Z")

</div>

I’ll be making a set for mine this fall or winter when I get some time. After I put my heads on and get some mandrels.

---

<div class="post-metadata">

**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\
**Post date:** [September 26, 2005, 8:19pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/6 "2005-09-26T20:19:48Z")

</div>

so get some flanges and go to town… making headers is not THAT hard

---

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [September 26, 2005, 8:23pm UTC](https://forums.speedlife.net/t/getting-custom-headers-for-the-beater/2744/7 "2005-09-26T20:23:49Z")

</div>

It’s hard when you don’t have a welder, and can’t do any automotive work in the driveway. Otherwise I’d give it a go. :tdown: