# ghost HUD

**URL:** <https://forums.speedlife.net/t/ghost-hud/124131>\
**Category:** SON240sx Automotive\
**Created:** [May 3, 2009, 6:50pm UTC](https://forums.speedlife.net/t/ghost-hud/124131 "2009-05-03T18:50:29Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![89\_coupe](https://avatars.discourse-cdn.com/v4/letter/8/e0b2c6/32.png) [@89\_coupe](https://forums.speedlife.net/u/89_coupe)\
**Post date:** [May 3, 2009, 6:50pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/1 "2009-05-03T18:50:29Z")

</div>

my hud is acting very weird lol. it was working when i bought the car. then it stopped. i know this is normal but then after a while it starts working again. but instead of reading 0km/h when stoped its all over the place until i start moving. then she conked out again. today i just realized that when i turn my hazards on then off it comes on aha. but like before when im stopped its all over the place but when im moving its working. any one know what causing this.

---

<div class="post-metadata">

**Author:** ![StickShiftDrifter](https://avatars.discourse-cdn.com/v4/letter/s/ba9def/32.png) [@StickShiftDrifter](https://forums.speedlife.net/u/StickShiftDrifter)\
**Post date:** [May 4, 2009, 7:35am UTC](https://forums.speedlife.net/t/ghost-hud/124131/2 "2009-05-04T07:35:07Z")

</div>

I have the same thing but with the tach…comes on spontaneously.  
I’ve taken the HUD out a buncha times so the harness could’ve been damaged.  
I’m gonna get the wiring diagram soon…I’ll post it here

---

<div class="post-metadata">

**Author:** ![89\_coupe](https://avatars.discourse-cdn.com/v4/letter/8/e0b2c6/32.png) [@89\_coupe](https://forums.speedlife.net/u/89_coupe)\
**Post date:** [May 4, 2009, 5:52pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/3 "2009-05-04T17:52:14Z")

</div>

sweet thanks. i think it might just be a bad ground

---

<div class="post-metadata">

**Author:** ![5cott](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/5cott/32/5737_2.png) [@5cott](https://forums.speedlife.net/u/5cott)\
**Post date:** [May 4, 2009, 9:14pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/4 "2009-05-04T21:14:37Z")

</div>

jenkies

---

<div class="post-metadata">

**Author:** ![89\_coupe](https://avatars.discourse-cdn.com/v4/letter/8/e0b2c6/32.png) [@89\_coupe](https://forums.speedlife.net/u/89_coupe)\
**Post date:** [May 5, 2009, 3:04pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/5 "2009-05-05T15:04:30Z")

</div>

> [@JDM cars through the years.](https://forums.speedlife.net/t/jdm-cars-through-the-years/21828/46):
>
> jenkies

aha. im thinking its just a bad connection.

---

<div class="post-metadata">

**Author:** ![john\_gto](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/john_gto/32/5641_2.png) [@john\_gto](https://forums.speedlife.net/u/john_gto)\
**Post date:** [May 5, 2009, 5:26pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/6 "2009-05-05T17:26:06Z")

</div>

Likely a poor connection -the black connector beside the HUD connector on the back of the cluster can give you issues like this . I just tested 6 different HUD clusters and 2 had a similar issue - my coupe is setup with an extra set of main harness cluster connectors coming thru the console so I can test/drive with a second cluster plugged in 🙂

---

<div class="post-metadata">

**Author:** ![89\_coupe](https://avatars.discourse-cdn.com/v4/letter/8/e0b2c6/32.png) [@89\_coupe](https://forums.speedlife.net/u/89_coupe)\
**Post date:** [May 5, 2009, 6:24pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/7 "2009-05-05T18:24:16Z")

</div>

does anyone have a wireing diagram at all?

---

<div class="post-metadata">

**Author:** ![KA24Power](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ka24power/32/5595_2.png) [@KA24Power](https://forums.speedlife.net/u/KA24Power)\
**Post date:** [May 5, 2009, 6:29pm UTC](https://forums.speedlife.net/t/ghost-hud/124131/8 "2009-05-05T18:29:00Z")

</div>

^i’ve got one in the FSM