# give me sympathy...

**URL:** <https://forums.speedlife.net/t/give-me-sympathy/193228>\
**Category:** PittSpeed Off Topic\
**Created:** [October 23, 2007, 3:08pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228 "2007-10-23T15:08:14Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)\
**Post date:** [October 23, 2007, 3:08pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/1 "2007-10-23T15:08:14Z")

</div>

preferably from women with loose morals…

No tendons where hurt in the making of this pic. Wahoo. Pressing 5th driven gear off the tail shaft of a t45 that I’m rebuilding. I had my hand on the shaft so when it poped free it didn’t slide to the floor and nick a gear. Well it slid to my hand and sheared me a bit on one the shafts machine edges. I tried to get the best pic i could. Being that it appeared pretty deep I called my girl whom works at shady side upmc. They snuck me in under the table and hooked it up with a couple stitches.

 ![http://img.photobucket.com/albums/v683/Jaycoop/CIMG1784.jpg](http://img.photobucket.com/albums/v683/Jaycoop/CIMG1784.jpg)

---

<div class="post-metadata">

**Author:** ![Laura00WS6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laura00ws6/32/6017_2.png) [@Laura00WS6](https://forums.speedlife.net/u/Laura00WS6)\
**Post date:** [October 23, 2007, 3:13pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/2 "2007-10-23T15:13:28Z")

</div>

ouch

---

<div class="post-metadata">

**Author:** ![Zack01GC](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zack01GC](https://forums.speedlife.net/u/Zack01GC)\
**Post date:** [October 23, 2007, 4:04pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/3 "2007-10-23T16:04:43Z")

</div>

Looks deep. I hate cutting fingers/hands. Don’t realize how much you use them until you bust one.

---

<div class="post-metadata">

**Author:** ![F-B-A](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/f-b-a/32/6022_2.png) [@F-B-A](https://forums.speedlife.net/u/F-B-A)\
**Post date:** [October 23, 2007, 4:22pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/4 "2007-10-23T16:22:00Z")

</div>

guess you’ll be utilizing the “stranger” tonight…Assuming your right handed

---

<div class="post-metadata">

**Author:** ![Jenn](https://avatars.discourse-cdn.com/v4/letter/j/ba9def/32.png) [@Jenn](https://forums.speedlife.net/u/Jenn)\
**Post date:** [October 23, 2007, 4:35pm UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/5 "2007-10-23T16:35:57Z")

</div>

Awww you poor thing…

Ok, Pity Party is over- get back to work! 😉

---

<div class="post-metadata">

**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\
**Post date:** [October 24, 2007, 5:04am UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/6 "2007-10-24T05:04:47Z")

</div>

Doesn’t look too bad, whacking hands on gears is no fun at all.

On the other hand…you know where else you can find sand?..beaches

---

<div class="post-metadata">

**Author:** ![4doors5gears](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4doors5gears/32/6006_2.png) [@4doors5gears](https://forums.speedlife.net/u/4doors5gears)\
**Post date:** [October 24, 2007, 6:27am UTC](https://forums.speedlife.net/t/give-me-sympathy/193228/7 "2007-10-24T06:27:05Z")

</div>

Jay I’ve had bigger paper cuts from my job, go back to work.

Just kidding, hope you get all better!