# gm keyless entry PLEASE HELP

**URL:** <https://forums.speedlife.net/t/gm-keyless-entry-please-help/53311>\
**Category:** NYSpeed Automotive\
**Created:** [August 15, 2008, 1:56pm UTC](https://forums.speedlife.net/t/gm-keyless-entry-please-help/53311 "2008-08-15T13:56:44Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![AKA-FERRARI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aka-ferrari/32/7260_2.png) [@AKA-FERRARI](https://forums.speedlife.net/u/AKA-FERRARI)\
**Post date:** [August 15, 2008, 4:51pm UTC](https://forums.speedlife.net/t/gm-keyless-entry-please-help/53311/6 "2008-08-15T16:51:10Z")

</div>

> [@FightinMike](#):
>
> 1. Sit in the driver’s seat
> 2. Remove the ignition key from the ignition lock cylinder
> 3. Close all the doors
> 4. Press and hold unlock on the door lock switch (on the door)
> 5. While holding the door lock switch in the unlock position, insert and remove the ignition key twice. DO NOT ROTATE THE KEY… JUST SLIDE IT IN AND BACK OUT.
> 6. Insert the ignition key the third time, leaving the key in the ignition cylinder. DO NOT TURN KEY
> 7. Release the door lock switch. You will hear 3 chimes indicating the transmitter  
> programming is active.
> 8. Press and hold the lock and unlock buttons on the keyless entry remote at the same time (one remote) for 12 seconds. You will hear two chimes. This indicates the  
> transmitter has been programmed.
> 9. Repeat step 8 for all additional transmitters to be programmed
> 10. Exit programming by removing the key from the ignition cylinder
> 
> This worked on my 97, dunno if its different for newer sorry.

only works on:  
silverados  
yukons  
tahoes  
sierras  
suburbans

---

_[View the full topic](https://forums.speedlife.net/t/gm-keyless-entry-please-help/53311)._