# Good machine shops around buffalo **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [March 16, 2008, 4:32pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111 "2008-03-16T16:32:39Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [March 16, 2008, 4:32pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/1 "2008-03-16T16:32:39Z")
Ive done the search on here, but seem to get conflicting answers. So please only post if you PERSONALLY have had work done there and how it turned out. Please don’t post if you heard of someones experience. What I’m looking to get done: -knife-edge, polish a crank -bore cylinders -possibly assemble block EDIT: could you post up what you got done, how much it was please and where they are located. thanks in advance. ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [March 16, 2008, 4:50pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/2 "2008-03-16T16:50:35Z")
I had my machine work done at oddys did a good job kinda slow but thats to be expected with a busy machine shop most likely will go there with what ever else i may need. ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [March 16, 2008, 4:55pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/3 "2008-03-16T16:55:31Z")
> [@mindless](#): > > I had my machine work done at oddys did a good job kinda slow but thats to be expected with a busy machine shop most likely will go there with what ever else i may need. what did you get done there? ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [March 16, 2008, 4:57pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/4 "2008-03-16T16:57:48Z")
Bore, hone, decked the block and a cleaning ---
**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\ **Post date:** [March 16, 2008, 5:43pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/5 "2008-03-16T17:43:22Z")
j and l performance ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [March 16, 2008, 5:47pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/6 "2008-03-16T17:47:56Z")
LOCK ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [March 16, 2008, 6:11pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/7 "2008-03-16T18:11:16Z")
> [@Viper966](#): > > LOCK ? ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [March 16, 2008, 6:35pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/8 "2008-03-16T18:35:29Z")
he ment, please search ---
**Author:** ![greddy420a](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/greddy420a/32/5066_2.png) [@greddy420a](https://forums.speedlife.net/u/greddy420a)\ **Post date:** [March 16, 2008, 6:46pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/9 "2008-03-16T18:46:11Z")
> [@lsvtechatch"](#): > > Ive done the search on here, but seem to get conflicting answers. So please only post if you PERSONALLY have had work done there and how it turned out. he did do the search and wasnt satisfied ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [March 16, 2008, 7:15pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/10 "2008-03-16T19:15:35Z")
klispies ---
**Author:** ![AngryHero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/angryhero/32/7495_2.png) [@AngryHero](https://forums.speedlife.net/u/AngryHero)\ **Post date:** [March 16, 2008, 8:43pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/11 "2008-03-16T20:43:51Z")
not many people do knife edging.I had mine done from someplace in california.They were called castillos crankshaft service.They were featured in turbo magazine.I know my crank looks great now. ---
**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\ **Post date:** [March 16, 2008, 9:00pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/12 "2008-03-16T21:00:31Z")
> [@speedped79](#): > > j and l performance x2, if ya want pictures i can take some of my block and head assembled, i dont have my recipet just next to me but ill dig it up 2mrrw it was 930$ to get the cam degreed in, bored 40 over, valves bored out 1mm over, etc, drop in bolt on rest of stuff, and of course, checked over, painted etc. etc. ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [March 16, 2008, 9:14pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/13 "2008-03-16T21:14:23Z")
i had the turbo shadow done at jancen. got slightly dicked around on the time frame but the work done was outstanding. ---
**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\ **Post date:** [March 16, 2008, 9:16pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/14 "2008-03-16T21:16:00Z")
> [@psychopjv](#): > > i had the turbo shadow done at jancen. got slightly dicked around on the time frame but the work done was outstanding. my budd yhad the same response with his chevelle engine thru them took a while but it was nasty wen it came out ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [March 17, 2008, 9:54am UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/15 "2008-03-17T09:54:38Z")
> [@lsvtechatch"](#): > > So please only post if you PERSONALLY have had work done there and how it turned out. Please don’t post if you heard of someones experience. > > [quote=speedped79;872226]my budd yhad the same response with his chevelle engine thru them took a while but it was nasty wen it came out … does this look familiar…come on man.:zong: ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [March 17, 2008, 10:03am UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/16 "2008-03-17T10:03:42Z")
had a bad expeirence with gorden,stay away ---
**Author:** ![jt76](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jt76/32/5100_2.png) [@jt76](https://forums.speedlife.net/u/jt76)\ **Post date:** [March 17, 2008, 12:27pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/17 "2008-03-17T12:27:51Z")
my friend had his 340 out of his 70’ Dart worked on at Jan Cen… top notch, but it took a while. ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [March 17, 2008, 2:52pm UTC](https://forums.speedlife.net/t/good-machine-shops-around-buffalo/45111/18 "2008-03-17T14:52:57Z")
has anyone had a crank knifedged around here?