# Good place to get brake disc/rotor turned?
**URL:** https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116
**Category:** NYSpeed Automotive
**Created:** [September 28, 2007, 2:28pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116 "2007-09-28T14:28:33Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@Red99GTVert](https://forums.speedlife.net/u/Red99GTVert)
#### Post date: [September 28, 2007, 2:28pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/1 "2007-09-28T14:28:33Z")
Anyone have a recommended place to get a rotor turned? Thanks.
---
### Author:  [@9ONA3OOZX](https://forums.speedlife.net/u/9ONA3OOZX)
#### Post date: [September 28, 2007, 2:30pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/2 "2007-09-28T14:30:21Z")
it’s my understanding that it’s never worth it to do this…
just get new rotors…
---
### Author:  [@AngryHero](https://forums.speedlife.net/u/AngryHero)
#### Post date: [September 28, 2007, 3:22pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/3 "2007-09-28T15:22:58Z")
Napa does them for cheap.(The main store on whirle)
Rotors are cheap.Get new ones
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [September 28, 2007, 5:22pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/4 "2007-09-28T17:22:31Z")
Aerostar is a big rotor with a hub if its thick turn it.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 28, 2007, 9:09pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/5 "2007-09-28T21:09:04Z")
[quote=“Pauly,post:4,topic:36116"”]
Aerostar is a big rotor with a hub if its thick turn it.
[/quote]
I would suggest you buy new rotors.
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [September 28, 2007, 9:16pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/6 "2007-09-28T21:16:21Z")
[http://www.partsamerica.com/ProductDetail.aspx?MfrCode=RAY&MfrPartNumber=66443RGS&PartType=221&PTSet=A](http://www.partsamerica.com/ProductDetail.aspx?MfrCode=RAY&MfrPartNumber=66443RGS&PartType=221&PTSet=A)
$24.99 each.
How much is it to turn them at napa?
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [September 28, 2007, 9:19pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/7 "2007-09-28T21:19:56Z")
for what car? assuming its the 99 mustang GT in your sig…i have some stockers that are fine…$25 for all 4 if you want them…just let me check my shed tomorrow and make sure i still got them.
---
### Author:  [@91MR2](https://forums.speedlife.net/u/91MR2)
#### Post date: [September 28, 2007, 9:44pm UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/8 "2007-09-28T21:44:37Z")
[quote=“90NA300ZX,post:2,topic:36116"”]
it’s my understanding that it’s never worth it to do this…
just get new rotors…
[/quote]
Not always the case…
Rear rotors for my Esprit are now out of production. When I called on a price for a set of rears, they quoted me ~$750 for a set of rears. I respectfully declined and had Skrapper surface mine for ~$20, on Englewood. Good as new…
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [September 29, 2007, 3:35am UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/9 "2007-09-29T03:35:50Z")
where the F did i get aerostar from? I normally would not get a hub-less rotor turned, unless it looked like new and only had a slight pulsation. Rusty-dont bother. Large full size rotors with a hub i’ve never had an issue turning, providing they were thick enough and not at discard after turning.
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [September 29, 2007, 5:51am UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/10 "2007-09-29T05:51:50Z")
[quote=“91MR2,post:8,topic:36116"”]
Not always the case…
Rear rotors for my Esprit are now out of production. When I called on a price for a set of rears, they quoted me ~$750 for a set of rears. I respectfully declined and had Skrapper surface mine for ~$20, on Englewood. Good as new…
[/quote]
this is true… however he apparently has a 99 mustang gt.
:loopie:
---
### Author:  [@Carbonfiberhooded](https://forums.speedlife.net/u/Carbonfiberhooded)
#### Post date: [September 30, 2007, 8:54am UTC](https://forums.speedlife.net/t/good-place-to-get-brake-disc-rotor-turned/36116/11 "2007-09-30T08:54:26Z")
Go to Skrapper at Napa. He won’t bullshit you. If they can be turned, he’ll do it. If you need new ones he’ll tell you.