# Good repair shop? **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [May 11, 2006, 1:24pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916 "2006-05-11T13:24:45Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 1:24pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/1 "2006-05-11T13:24:45Z")
Ok. I really don’t have time (nor do I actually care) to find out what is wrong with my car. I went over these wicked train tracks the other day (Bikerfly and others would know–they’re the ones at Wurlitzer and Erie in NT). Well, I noticed a slight clicking after. And then yesterday. And now today it’s a little worse. It clicks faster when it’s going faster. And I’m think MAYBE something to do with my front brakes (because they haven’t been done in 39k miles) but that’s a large maybe. Anyway. I’ll let somebody else figure it out. If all else fails then I’ll go to Don Davis, because they are quite good. But they are quite pricey. I need it done quickly. I need to go to Ithaca next week and I don’t want to take my car since it’s CLICKING. ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [May 11, 2006, 1:31pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/2 "2006-05-11T13:31:47Z")
clicking sounds like a CV shaft ---
**Author:** ![Fry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fry/32/7284_2.png) [@Fry](https://forums.speedlife.net/u/Fry)\ **Post date:** [May 11, 2006, 1:49pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/3 "2006-05-11T13:49:10Z")
Yeah those train tracks suck. But the symptoms make me think it’s more likely something that rotates, and it’s rotational speed is relative to road speed. Could it be a wheel bearing? ---
**Author:** ![Daddie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daddie/32/7621_2.png) [@Daddie](https://forums.speedlife.net/u/Daddie)\ **Post date:** [May 11, 2006, 2:10pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/4 "2006-05-11T14:10:37Z")
wheel bearings don’t click i bet it’s either CV or axle ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 2:28pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/5 "2006-05-11T14:28:18Z")
Timotie is coming over and checking it out. Otherwise I’m going to Ithaca via CR-V. ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 5:42pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/6 "2006-05-11T17:42:30Z")
So I bought brakes and I’m putting them on, but I’ve run into a problem… The big middle nut holding on the rotor/hub is not being my friend. ☹ ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 5:55pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/7 "2006-05-11T17:55:27Z")
lol breaker bar broke ! ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [May 11, 2006, 6:01pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/8 "2006-05-11T18:01:01Z")
you need my impact gun… ---
**Author:** ![Jskrapper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jskrapper/32/7570_2.png) [@Jskrapper](https://forums.speedlife.net/u/Jskrapper)\ **Post date:** [May 11, 2006, 6:03pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/9 "2006-05-11T18:03:52Z")
Why do you need to take off the axle nut? Your rotors are probably just rusted on the hub…BFH time. ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [May 11, 2006, 7:22pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/10 "2006-05-11T19:22:46Z")
:word: hell yea that always works wonders, beat the snot out of em ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [May 11, 2006, 7:22pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/11 "2006-05-11T19:22:54Z")
yea the only reason you’d need to take that nut off is to take out the axles or the hub assembly just take a hammer to the rotors and pop um off ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 8:56pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/12 "2006-05-11T20:56:27Z")
Nope not on Accords. It’s stupid. I’ll let JOe esssplanines ---
**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\ **Post date:** [May 11, 2006, 9:02pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/13 "2006-05-11T21:02:27Z")
cories accord = hub over rotor IIRC basicly have to do rotors as if you were replacing the wheel bearings, cause the bearing winds up on the bench as its own piece before you can swap rotArs ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [May 11, 2006, 9:03pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/14 "2006-05-11T21:03:44Z")
yea and then it wont come out so i say fuck it i dont have access to a press till tomorrow night ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 11:08pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/15 "2006-05-11T23:08:23Z")
I’m so pissed now ☹ ---
**Author:** ![RedGoober4Life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redgoober4life/32/7610_2.png) [@RedGoober4Life](https://forums.speedlife.net/u/RedGoober4Life)\ **Post date:** [May 11, 2006, 11:18pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/16 "2006-05-11T23:18:10Z")
![http://static.flickr.com/53/144939238_faf758bf7c_o.jpg](http://static.flickr.com/53/144939238_faf758bf7c_o.jpg) I’m thinking that they really do need replacing though. That’s the back of one. bha. I hope that I can find a shop that will use the parts I purchased. ejkfjahrrr ---
**Author:** ![botardtim](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@botardtim](https://forums.speedlife.net/u/botardtim)\ **Post date:** [May 11, 2006, 11:54pm UTC](https://forums.speedlife.net/t/good-repair-shop/11916/17 "2006-05-11T23:54:34Z")
haha So much for being CV shaft. ---
**Author:** ![ly555is](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@ly555is](https://forums.speedlife.net/u/ly555is)\ **Post date:** [May 12, 2006, 1:03am UTC](https://forums.speedlife.net/t/good-repair-shop/11916/18 "2006-05-12T01:03:51Z")
looks like the titanic