# Good s13 auto\>manual information...? **URL:** \ **Category:** SON240sx Automotive\ **Created:** [March 29, 2008, 11:02pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252 "2008-03-29T23:02:52Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [March 29, 2008, 11:02pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/1 "2008-03-29T23:02:52Z")
Hey guys, im going to do a auto\>manual swap this summer and I would like to get some info about it (IE: walkthroughs, tutorials). the only info I can find about it is for s14’s, so if anyone knows about any s13 swap info let me know. ---
**Author:** ![frankduxx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/frankduxx/32/5647_2.png) [@frankduxx](https://forums.speedlife.net/u/frankduxx)\ **Post date:** [March 29, 2008, 11:13pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/2 "2008-03-29T23:13:31Z")
same thing that book is good ---
**Author:** ![KA24Power](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ka24power/32/5595_2.png) [@KA24Power](https://forums.speedlife.net/u/KA24Power)\ **Post date:** [March 30, 2008, 7:57pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/3 "2008-03-30T19:57:27Z")
> **[240sx manual transmission swap](http://nicoclub.com/archives/automatic-transmission-manual-swap.html)** > > When you're ready to switch from an automatic to manual transmission in your 240sx, here's all the information you'll need. ---
**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\ **Post date:** [March 30, 2008, 10:38pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/4 "2008-03-30T22:38:00Z")
It’s very straightforward. 1. Remove auto tranny and auto pilot bushing 2. Drill holes for new clutch pedal and install with clutch master cylinder 3. Remove old brake pedal and replace with 5 speed one (or cut the old one) 4. Switch driveshafts for the 5 speed one (make sure you get ABS/non-abs accordingly) 5. Install 5 speed tranny with NEW manual pilot bushing and NEW koyo (nissan oem) throw out bearing and 5 speed tranny crossmember 6. Connect clutch hardline and softline directly to slave (don’t use the clutch dampener box) 7. Jump parking fuse wires Done. These steps may be out of order, but those are all of them in a general sequence of things. Hopefully I didn’t miss anything. ---
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [March 31, 2008, 7:15am UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/5 "2008-03-31T07:15:07Z")
1. Switch driveshafts for the 5 speed one (make sure you get ABS/non-abs accordingly)’ So my 91 is non-ABS therefor my driveshaft is non-ABS, so I must make shure I get myself a non-ABS tran. Got it. Thanks dudes. ---
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [April 8, 2008, 4:09pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/6 "2008-04-08T16:09:45Z")
does anyone know where I could find a “NEW manual pilot bushing and NEW koyo (nissan oem) throw out bearing”? try calling the dealership? ---
**Author:** ![CrypticNissan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crypticnissan/32/5663_2.png) [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)\ **Post date:** [April 9, 2008, 11:21am UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/7 "2008-04-09T11:21:54Z")
call your dealer there like $8 ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [April 9, 2008, 2:22pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/8 "2008-04-09T14:22:29Z")
pm Simplemind7 ---
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [April 14, 2008, 12:06pm UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/9 "2008-04-14T12:06:01Z")
Apparently my 91 is from the US because when I give my vin number to any dealership they say “that number is no good, you must have a US car” and because of that they cannot look up any of the parts I need. Does anyone know the numbers of these parts? Break booster (non-ABS) and master cylinder Throw out barring Manual pilot bushing Thanks guys. ---
**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\ **Post date:** [April 15, 2008, 8:59am UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/10 "2008-04-15T08:59:34Z")
No you don’t need a non-ABS tranny, there is no difference. You need a 5 speed non-abs driveshaft. Just goto nissan and say you need a manual pilot bushing and throw out bearing for a 240sx. They should be able to find it if they aren’t too lazy! ---
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [April 15, 2008, 9:08am UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/11 "2008-04-15T09:08:25Z")
> [@Bush admits he is a war criminal](https://forums.speedlife.net/t/bush-admits-he-is-a-war-criminal/16660/9): > > Just goto nissan and say you need a manual pilot bushing and throw out bearing for a 240sx. They should be able to find it if they aren’t too lazy! haha, thats what I thought! ---
**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\ **Post date:** [April 15, 2008, 9:46am UTC](https://forums.speedlife.net/t/good-s13-auto-manual-information/114252/12 "2008-04-15T09:46:39Z")
Wooo, 401 dixie comes through just for fun I asked for the prices off all the parts that I need. $821 for a master cylinder!!! how do people do it?