# Greddy intercooler question!

**URL:** <https://forums.speedlife.net/t/greddy-intercooler-question/126240>\
**Category:** SON240sx Automotive\
**Created:** [July 14, 2009, 8:40am UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240 "2009-07-14T08:40:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\
**Post date:** [July 14, 2009, 8:40am UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240/1 "2009-07-14T08:40:19Z")

</div>

![http://ep.yimg.com/ip/I/import-store_2057_887655028](http://ep.yimg.com/ip/I/import-store_2057_887655028)

hey guys, just bought an intercooler, no instructions though.

so the big question is, what is the two black brackets near the bottom of the picture?

where do they go?

---

<div class="post-metadata">

**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\
**Post date:** [July 14, 2009, 10:22am UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240/2 "2009-07-14T10:22:00Z")

</div>

this should help you  
[http://www.zeroyon.com/index/content/view/30/47/](http://www.zeroyon.com/index/content/view/30/47/)

---

<div class="post-metadata">

**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\
**Post date:** [July 15, 2009, 12:42am UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240/3 "2009-07-15T00:42:53Z")

</div>

Two black brackets holds the intercooler via the brackets on the cooler to the lower rad support area.

---

<div class="post-metadata">

**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\
**Post date:** [July 15, 2009, 12:01pm UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240/4 "2009-07-15T12:01:21Z")

</div>

that doesnt make sense cause my intercooler bolted right up to the chassis without the brackets. and the two black brackets are different. shouldnt they be the same if you put them on the frame and the lower two mounts?

---

<div class="post-metadata">

**Author:** ![ronnie416](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ronnie416/32/5480_2.png) [@ronnie416](https://forums.speedlife.net/u/ronnie416)\
**Post date:** [July 15, 2009, 2:20pm UTC](https://forums.speedlife.net/t/greddy-intercooler-question/126240/5 "2009-07-15T14:20:56Z")

</div>

If the IC already mounted to the chassis then you don’t need to worry about those brackets. I assumed those brackets were the same. Look just like the brackets used to mount the IC to the support…if you don’t need em, you don’t need em. 🙂