# Greddy RS BOV locking nut

**URL:** <https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340>\
**Category:** SON240sx Automotive\
**Created:** [September 29, 2006, 4:08am UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340 "2006-09-29T04:08:29Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\
**Post date:** [September 29, 2006, 4:08am UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/1 "2006-09-29T04:08:29Z")

</div>

Lost my BOV’s locking nut, the one that keeps the adjusting screw in it’s position.

Should be the same size as the Greddy type-S as well…

Anyone know where I can get one or a similar sized nut at CT/Part Source etc that’ll do the trick (and the specs on it)?

---

<div class="post-metadata">

**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\
**Post date:** [October 2, 2006, 9:07am UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/2 "2006-10-02T09:07:27Z")

</div>

its just an M10 or M8 nut afaik

---

<div class="post-metadata">

**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\
**Post date:** [October 2, 2006, 7:09pm UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/3 "2006-10-02T19:09:42Z")

</div>

> [@bing](#):
>
> its just an M10 or M8 nut afaik

Alright, i’ll be checking CT to see if I can match something up…shouldn’t be too hard.

If I find it, i’ll update in case anyone else runs into the same problem.

---

<div class="post-metadata">

**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\
**Post date:** [September 29, 2006, 4:08am UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/4 "2006-09-29T04:08:29Z")

</div>

Lost my BOV’s locking nut, the one that keeps the adjusting screw in it’s position.

Should be the same size as the Greddy type-S as well…

Anyone know where I can get one or a similar sized nut at CT/Part Source etc that’ll do the trick (and the specs on it)?

---

<div class="post-metadata">

**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\
**Post date:** [October 2, 2006, 9:07am UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/5 "2006-10-02T09:07:27Z")

</div>

its just an M10 or M8 nut afaik

---

<div class="post-metadata">

**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\
**Post date:** [October 2, 2006, 7:09pm UTC](https://forums.speedlife.net/t/greddy-rs-bov-locking-nut/100340/6 "2006-10-02T19:09:42Z")

</div>

> [@bing](#):
>
> its just an M10 or M8 nut afaik

Alright, i’ll be checking CT to see if I can match something up…shouldn’t be too hard.

If I find it, i’ll update in case anyone else runs into the same problem.