# Greddy Snorkle! **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [April 9, 2007, 6:19am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136 "2007-04-09T06:19:31Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![SP71Supra](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sp71supra/32/5955_2.png) [@SP71Supra](https://forums.speedlife.net/u/SP71Supra)\ **Post date:** [April 9, 2007, 6:19am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/1 "2007-04-09T06:19:31Z")
Well… I started fucking around with project baja… I figured I needed a snorkle to begin with since there was no intake at all on my Jeep. I need to change this alu piping to plastic. Autozone supposly sells plastic 2 inch air ducting in the ricer section but I did not feel like driving to C3 to get to an autozone. I figured this piping would work but its too soft, its hard to puncture but once it gets a little tear it tears like alu foil. It looked like this was going to be a bitch to install because originaly I planned on taking it out the drivers side, which I would have to remove my coolant and washer bottles. Well I busted out some Greddy intercooler piping from the supra that I had extra and got an idea to run it out the passanger side which means no reloacting anything. I just took cell phone pics down the shop. In these pics the mount bracket is not rivited to the windshield pillar yet, its just duct taped. Let me know what you guys think besides replacing the flex piping. Sporting the Greddy coupler (until hybrid sponsers the Jeep with a HD one 🙂 ) ![http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1752.jpg](http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1752.jpg) Greddy piping that saved my ass ![http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1309.jpg](http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1309.jpg) ![http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1757.jpg](http://i56.photobucket.com/albums/g169/sp71supra/04-07-07_1757.jpg) I know its ghetto as fuck, but hey… hopefully it does the job! ---
**Author:** ![burnyd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/burnyd/32/6020_2.png) [@burnyd](https://forums.speedlife.net/u/burnyd)\ **Post date:** [April 9, 2007, 6:22am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/2 "2007-04-09T06:22:08Z")
snorkle ftw! ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [April 9, 2007, 6:27am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/3 "2007-04-09T06:27:06Z")
🤣 ghetto as fuck is an understatement. but as long as it’s fun, thats all that counts! ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [April 9, 2007, 6:29am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/4 "2007-04-09T06:29:32Z")
Put a shield on the front of the cone and it will ford deeper water. Then again, that’s pretty deep water if it’s all the way up there! ---
**Author:** ![SP71Supra](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sp71supra/32/5955_2.png) [@SP71Supra](https://forums.speedlife.net/u/SP71Supra)\ **Post date:** [April 9, 2007, 6:37am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/5 "2007-04-09T06:37:53Z")
> [@BlkP42E"](#): > > 🤣 ghetto as fuck is an understatement. > > but as long as it’s fun, thats all that counts! people actually build these on jeep forums and the funny thing is they actually care about their jeep! :bowrofl: This thing is a quad to me. Noone noticed the T-bolt clamps on the throttle body, lmao! ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [April 9, 2007, 6:39am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/6 "2007-04-09T06:39:33Z")
> [@NYSpeed @ Winged Warrior Performance Challenge - May 11th, 12th 2007](https://forums.speedlife.net/t/nyspeed-winged-warrior-performance-challenge-may-11th-12th-2007/22533/305): > > This thing is a quad to me. lmao! 🤣🤣🤣 ---
**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\ **Post date:** [April 9, 2007, 1:52pm UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/7 "2007-04-09T13:52:42Z")
hey what ever works…but it dont look too shabby for just throwin it together ---
**Author:** ![BigMack\_Srt8](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bigmack_srt8/32/6025_2.png) [@BigMack\_Srt8](https://forums.speedlife.net/u/BigMack_Srt8)\ **Post date:** [April 21, 2007, 11:56pm UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/8 "2007-04-21T23:56:25Z")
My buddy put a snorkel on his jeep and its really loud… Did you notice any difference in the sound of the intake being that its 900 feet long? ---
**Author:** ![Heart4Audio](https://avatars.discourse-cdn.com/v4/letter/h/d9b06d/32.png) [@Heart4Audio](https://forums.speedlife.net/u/Heart4Audio)\ **Post date:** [April 22, 2007, 6:18am UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/9 "2007-04-22T06:18:10Z")
sure is funny looking, but it’s cheap and serves it’s purpose. good work ---
**Author:** ![SCHMEIDER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/schmeider/32/6032_2.png) [@SCHMEIDER](https://forums.speedlife.net/u/SCHMEIDER)\ **Post date:** [April 22, 2007, 9:04pm UTC](https://forums.speedlife.net/t/greddy-snorkle/189136/10 "2007-04-22T21:04:43Z")
ahahah thats funny as hell!