# Greddy VSPL - S13 Koyo - Kouki Fogs - 5 lug + more

**URL:** https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653
**Category:** Classifieds
**Created:** [March 31, 2013, 8:02am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653 "2013-03-31T08:02:02Z")
**Posts on this page:** 18
**Page:** 1

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [March 31, 2013, 8:02am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/1 "2013-03-31T08:02:02Z")

</div>

gents, looking to clear out some space in my garage so i can fit a car back in there 🙂

I also have these S14 Kouki fog lights… i bought a bunch of them to make them work then took them off the car… i have 2 rights and 1 left.

$60 each…

![http://www.bings.ca/images/parts/kouki%20fogs.JPG](http://www.bings.ca/images/parts/kouki%20fogs.JPG)

This is a blown out CF mufflered s13 axleback… could be used for the piping and the tip i guess…

$40 or i take it to the scrappers with some other stuff

![http://www.bings.ca/images/parts/busted%20cf%20exhaust.JPG](http://www.bings.ca/images/parts/busted%20cf%20exhaust.JPG)

These are some mis-machined 20mm wheel spacers… they are missing a hole for the 4 lug pattern and the hub centric lip is also not on them… they are still hub centric for Nissan centre bore.

i have a few pairs of these left. they are suitable for 5 lug rear spacers only imho. Solid billet, Canadian made.

$45 per pair

![http://www.bings.ca/images/parts/janky%20spacers.JPG](http://www.bings.ca/images/parts/janky%20spacers.JPG)

Autometer and Defi Stepmaster bost gauges… the Defi needs a link meter, i just don’t need it since i have the truboost too

$50 for autometer, $80 for defi

![http://www.bings.ca/images/parts/boost%20gauges.JPG](http://www.bings.ca/images/parts/boost%20gauges.JPG)

Greddy bov flanges… one on pipe is sold…

$25 each

![http://www.bings.ca/images/parts/greddy%20flanges.JPG](http://www.bings.ca/images/parts/greddy%20flanges.JPG)

3 G35 / 350z wheel hub & bearings… no studs, i had ARP studs and pressed them into my new hubs… turns out it was an alignment issue not a hub / bearing issue… other than the one not pictured here. i’m not sure which are fronts and which are rears at this point

$100 for all 3.

![http://www.bings.ca/images/parts/G35%20Wheel%20Hubs.JPG](http://www.bings.ca/images/parts/G35%20Wheel%20Hubs.JPG)

FULL 5 LUG Conversion, front and rear.

front is redrilled OEM hubs with ARP studs

rear are conversion hubs.

$200 for all… still on the spindles, no pics.

* * *

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [March 31, 2013, 9:17am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/2 "2013-03-31T09:17:33Z")

</div>

BTW, i woudl trade anything towards a decent set of wheels / tires that i can put on my S14 while i spend some time figuring out how to fit my CCW’s.

---

<div class="post-metadata">

### Author: ![Graeme](https://avatars.discourse-cdn.com/v4/letter/g/50afbb/32.png) [@Graeme](https://forums.speedlife.net/u/Graeme)
#### Post date: [March 31, 2013, 4:44pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/3 "2013-03-31T16:44:44Z")

</div>

Ahhhh. Wish you had posted the flanges a week ago. Still pretty interested in the one welded into the pipe.

edit: actually, interested in the AVC-R too. Is shipping a possibility?

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [March 31, 2013, 6:05pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/4 "2013-03-31T18:05:00Z")

</div>

yeah i can ship without any issue…

i’ll throw in the greddy flange thingy for free with the AVCR + $20 for shipping.

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 1, 2013, 10:34am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/5 "2013-04-01T10:34:51Z")

</div>

Avcr and greddy flange on pipe are sold.

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 1, 2013, 4:40pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/6 "2013-04-01T16:40:26Z")

</div>

* * *

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 3, 2013, 7:55pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/7 "2013-04-03T19:55:23Z")

</div>

i shouldnt have these parts, i should have someones money already… BUY NAAAOWWW!!!

---

<div class="post-metadata">

### Author: ![240sex](https://avatars.discourse-cdn.com/v4/letter/2/22d042/32.png) [@240sex](https://forums.speedlife.net/u/240sex)
#### Post date: [April 3, 2013, 7:58pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/8 "2013-04-03T19:58:04Z")

</div>

![http://www.asicentral.com/images/blogs/grumpy-no.jpg](http://www.asicentral.com/images/blogs/grumpy-no.jpg)

---

<div class="post-metadata">

### Author: ![Graeme](https://avatars.discourse-cdn.com/v4/letter/g/50afbb/32.png) [@Graeme](https://forums.speedlife.net/u/Graeme)
#### Post date: [April 4, 2013, 9:30am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/9 "2013-04-04T09:30:43Z")

</div>

> [@bing](#):
>
> Avcr and greddy flange on pipe are sold.

Arrived yesterday. Thanks again Bing!

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 8, 2013, 4:44pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/10 "2013-04-08T16:44:40Z")

</div>

removed some sold stuff… bump

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 8, 2013, 4:45pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/11 "2013-04-08T16:45:10Z")

</div>

BUMP!

---

<div class="post-metadata">

### Author: ![Zed](https://avatars.discourse-cdn.com/v4/letter/z/d78d45/32.png) [@Zed](https://forums.speedlife.net/u/Zed)
#### Post date: [April 8, 2013, 8:04pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/12 "2013-04-08T20:04:24Z")

</div>

Will any of these parts fit my ka, im turboing my ka, wanted to know if they will fit?  
Thnaks

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 8, 2013, 8:18pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/13 "2013-04-08T20:18:36Z")

</div>

Fmic can work

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [April 26, 2013, 8:29am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/14 "2013-04-26T08:29:17Z")

</div>

BUMP!!!

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [May 20, 2013, 7:13am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/15 "2013-05-20T07:13:53Z")

</div>

UPDATED… sold some stuff.

this vspl and koyo should have found a new home already.

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [June 29, 2013, 9:41am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/16 "2013-06-29T09:41:28Z")

</div>

vspl, koyo, subframe etc. all sold…

---

<div class="post-metadata">

### Author: ![Driftin-RPS13](https://avatars.discourse-cdn.com/v4/letter/d/67e7ee/32.png) [@Driftin-RPS13](https://forums.speedlife.net/u/Driftin-RPS13)
#### Post date: [June 30, 2013, 8:07pm UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/17 "2013-06-30T20:07:47Z")

</div>

What are the rear conversion 5 lug from? I might be interested in the swap

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [July 1, 2013, 8:00am UTC](https://forums.speedlife.net/t/greddy-vspl-s13-koyo-kouki-fogs-5-lug-more/229653/18 "2013-07-01T08:00:02Z")

</div>

I don’t know but they are near new.
