# grinding nuts

**URL:** <https://forums.speedlife.net/t/grinding-nuts/30807>\
**Category:** NYSpeed Off Topic\
**Created:** [June 13, 2007, 8:48am UTC](https://forums.speedlife.net/t/grinding-nuts/30807 "2007-06-13T08:48:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![suzukiriderman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suzukiriderman/32/7421_2.png) [@suzukiriderman](https://forums.speedlife.net/u/suzukiriderman)\
**Post date:** [June 13, 2007, 8:48am UTC](https://forums.speedlife.net/t/grinding-nuts/30807/1 "2007-06-13T08:48:56Z")

</div>

I bought a rotisserie that the nuts that were welded on are either stripping or the welds are not good enough so I want to take them off and weld on better ones. What is the best method to take these off? Just grind it with an angle grinder? Should I cut as much as I can off with my air high speed cutter then grind? Is there a type of grinding wheel that is better? I have to do about 12 and the welds are thick so the faster the better.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [June 13, 2007, 8:53am UTC](https://forums.speedlife.net/t/grinding-nuts/30807/2 "2007-06-13T08:53:14Z")

</div>

cut the weld with an angle grinder or cutoff wheel.

really the best option.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [June 13, 2007, 8:55am UTC](https://forums.speedlife.net/t/grinding-nuts/30807/3 "2007-06-13T08:55:25Z")

</div>

(SIDE NOTE: i had to make sure this wasn’t in the NWS forum before clicking)

---

<div class="post-metadata">

**Author:** ![Joe](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joe/32/7219_2.png) [@Joe](https://forums.speedlife.net/u/Joe)\
**Post date:** [June 13, 2007, 11:02am UTC](https://forums.speedlife.net/t/grinding-nuts/30807/4 "2007-06-13T11:02:10Z")

</div>

[quote=“newman,post:3,topic:30807"”]

(SIDE NOTE: i had to make sure this wasn’t in the NWS forum before clicking)

[/quote]

i think grinding nuts would be worth getting fired over. :gotme: