# GT35r A3 Del Sol

**URL:** <https://forums.speedlife.net/t/gt35r-a3-del-sol/56683>\
**Category:** Builds\
**Created:** [October 18, 2008, 4:32pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683 "2008-10-18T16:32:51Z")\
**Posts on this page:** 20\
**Page:** 12

<div class="post-metadata">

**Author:** ![reliant\_turbo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reliant_turbo/32/7189_2.png) [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)\
**Post date:** [January 25, 2010, 7:57pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/221 "2010-01-25T19:57:15Z")

</div>

> [@newman](#):
>
> Yeah, but only the super shitty ones. One wire pressure sensors are typically never accurate.

right… yeah the ground path through multiple connections and sketchy grounds from the original wiring harness never help. 🙂

solder/clamp on an extra ground wire to the housing directly to the gauge ground helps but a solid state sensor will always outperform.

my stock oil pressure gauge sender from 1987 looks just like this. i used a mechanical gauge instead lol.

then again, do you need .5psi oil pressure resolution. not really.

brian

---

<div class="post-metadata">

**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\
**Post date:** [January 25, 2010, 8:16pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/222 "2010-01-25T20:16:23Z")

</div>

this thing stilllll isnt completed yet?!?!?

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [January 26, 2010, 8:06pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/223 "2010-01-26T20:06:45Z")

</div>

the guages were some knock offs and I replaced the boost guage because it was busted with a autometer guage and now I have to replace the oil pressure gauge because I dont trust that either.

I will post up some new pics too. I just got my front speakers in from crutch field so I am putting those in and then the interior is finished besides the new oil pressure gauge.

---

<div class="post-metadata">

**Author:** ![budsdubbin](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@budsdubbin](https://forums.speedlife.net/u/budsdubbin)\
**Post date:** [January 30, 2010, 8:02am UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/224 "2010-01-30T08:02:23Z")

</div>

Did kyle ask you why you need a 400whp car? He was giving me the run-down all day yesterday on that shit. I’m just like dude I’m building the car for the sake of me taking pride in a hobby that I enjoy, and walking cars guys have spent 60k+ on. Dude was talking my ear off all day about vw/audi’s while the store was busy, it was truck day and apparently jeff didn’t schedule any drivers for that day.

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [February 1, 2010, 3:19pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/225 "2010-02-01T15:19:08Z")

</div>

update: finishing up the speaker install, and then working on the front bumper to fit with the new intercooler, and then going to line up the hood.

I will post pics tomorrow, I am hoping the new Infiniti Kappa and reference speakers sound good:run:

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [February 1, 2010, 6:17pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/226 "2010-02-01T18:17:22Z")

</div>

Here are the pictures of the speaker install, I have Infinitis now all the way around:

![http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184484503530_1570788543_30423019_1188184_n.jpg](http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184484503530_1570788543_30423019_1188184_n.jpg)  
 ![http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs131.snc3/17874_1184484543531_1570788543_30423020_7403774_n.jpg](http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs131.snc3/17874_1184484543531_1570788543_30423020_7403774_n.jpg)  
 ![http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184484463529_1570788543_30423018_6118442_n.jpg](http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184484463529_1570788543_30423018_6118442_n.jpg)  
 ![http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs131.snc3/17874_1184482103470_1570788543_30423017_3933455_n.jpg](http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs131.snc3/17874_1184482103470_1570788543_30423017_3933455_n.jpg)  
 ![http://hphotos-snc3.fbcdn.net/hs131.snc3/17874_1184481983467_1570788543_30423015_868585_n.jpg](http://hphotos-snc3.fbcdn.net/hs131.snc3/17874_1184481983467_1570788543_30423015_868585_n.jpg)  
 ![http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184481823463_1570788543_30423013_5173189_n.jpg](http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184481823463_1570788543_30423013_5173189_n.jpg)  
 ![http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184480383427_1570788543_30423011_7573195_n.jpg](http://hphotos-snc3.fbcdn.net/hs151.snc3/17874_1184480383427_1570788543_30423011_7573195_n.jpg)

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [February 28, 2010, 6:59pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/227 "2010-02-28T18:59:31Z")

</div>

UPDATE:

Motor comes back to me tomorrow!

I will post up pics when I get it, its been a long time coming!

---

<div class="post-metadata">

**Author:** ![budsdubbin](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@budsdubbin](https://forums.speedlife.net/u/budsdubbin)\
**Post date:** [February 28, 2010, 7:11pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/228 "2010-02-28T19:11:27Z")

</div>

JESUSSSSS… I never thought I’d live to see that happen. Hopfully you can get it in before I start developing errctile dysfunction.

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [February 28, 2010, 7:13pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/229 "2010-02-28T19:13:02Z")

</div>

Nov. 19 2008 was the last time I saw the motor

I am going to be putting it back together and have it in the car by the end of march, I have a second baby on the way so I need to speed thru the put back together of the motor compartment, turbociv is going to be coming over and helping out.

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [March 1, 2010, 8:35am UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/230 "2010-03-01T08:35:05Z")

</div>

Finally!  
whens the baby coming?

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 3, 2010, 8:33am UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/231 "2010-03-03T08:33:13Z")

</div>

update: motor is done, little sneak preview of it, cant wait to put it back in the car and bolt everything together,

side note, baby is due in august

**_The Motor build:_**  
Bore to +10  
Balanced crank/ blueprinted assembly  
Hot tanked/sandblasted block  
Mahle Motorsports pistons  
Eagle H Rods  
ACL Race Series Main Bearings  
ACL Race Series Rod Bearings  
ACL Trust Bearings  
Dry Filmed the bearings  
Ceramic Coated Pistons  
OEM Honda head gasket  
OEM Honda Timing belt  
OEM Honda Crankcase gasket set  
OEM Honda Camshaft seal kit  
Moroso oil pan  
Fluidamper Harmonic Balancer  
ITR Cams  
AEM Cam Gears  
New Springs/Retainers/Seals  
Edlebrock Victor X intake Mani  
_ **Everything was replaced except the stock crank** _\*

I didnt sleeve it, but I am not looking to push this motor to the extreme with boost, just somethiing a little zippy. Dont really care to go fast anymore with the two kids and the wife, to much to lose but when I have a urge to “hit it” I will have a chance with the car. I will be posting pictures of the install.

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [March 3, 2010, 2:48pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/232 "2010-03-03T14:48:27Z")

</div>

The good news is, it looks nice. The bad news is, if you were planning on running a timing belt cover on the upper half, you have to take the timing belt and cam gears off to bolt the rear part of the cover to the block. 😉

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 3, 2010, 3:48pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/233 "2010-03-03T15:48:36Z")

</div>

i run my belt exposed!!!

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 14, 2010, 6:57pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/234 "2010-03-14T18:57:20Z")

</div>

Update:

Been working on bolting everything to the motor and running the lines before its goes in, here is a quick pick:

![http://hphotos-snc3.fbcdn.net/hs494.snc3/27004_1214546135052_1570788543_30479055_2322824_n.jpg](http://hphotos-snc3.fbcdn.net/hs494.snc3/27004_1214546135052_1570788543_30479055_2322824_n.jpg)

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [March 14, 2010, 7:04pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/235 "2010-03-14T19:04:23Z")

</div>

please please please do not run that filter that is on your turbo

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 14, 2010, 7:05pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/236 "2010-03-14T19:05:34Z")

</div>

not going to, just dont want crap getting into it while it sits.

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [March 14, 2010, 7:15pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/237 "2010-03-14T19:15:11Z")

</div>

ok i was gonna say lol, ive seen too many turbos ruined bc the center gets sucked into the compressor!!

motor looks clean but im not a fan of no timing belt covers

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 16, 2010, 8:49pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/238 "2010-03-16T20:49:09Z")

</div>

got the intake manifold on. In the middle of changing over the cap and rotor but having to mess with the cap because its baked onto the distruptor shaft. Going to start connecting the harness and the lines next.

![http://hphotos-snc3.fbcdn.net/hs479.snc3/26218_1216088173602_1570788543_30481265_2973136_n.jpg](http://hphotos-snc3.fbcdn.net/hs479.snc3/26218_1216088173602_1570788543_30481265_2973136_n.jpg)

---

<div class="post-metadata">

**Author:** ![AndyB](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@AndyB](https://forums.speedlife.net/u/AndyB)\
**Post date:** [March 25, 2010, 6:17pm UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/239 "2010-03-25T18:17:53Z")

</div>

Update:

All the cooling lines are run.  
New Cap and button are on.  
Intake Manifold is on  
Clutch just came in at Swerve, going to put that on then drop the motor in!!!

Left to do:  
Get new Injectors  
Get new CV Shafts  
Re-Run all the vaccum lines with Silicone lines

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [March 26, 2010, 6:49am UTC](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683/240 "2010-03-26T06:49:37Z")

</div>

> [@AndyB](#):
>

Looking good. That oil pan look deeper then the one I have. Have you had this in the car yet? Where are you going to run your water to the turbo from?

[Previous page](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683.md?page=11)

[Next page](https://forums.speedlife.net/t/gt35r-a3-del-sol/56683.md?page=13)
