# H/C/I 306 **URL:** \ **Category:** Classifieds\ **Created:** [November 29, 2009, 8:17pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681 "2009-11-29T20:17:18Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [November 29, 2009, 8:17pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/1 "2009-11-29T20:17:18Z")
Well I’m going 408 so I’m selling my 306. Motor was built 2 years ago and has 19,000 miles on it. When the pistons were put in, the machine shop balanced the Flywheel and balancer to the new pistons. So the flywheel and balancer (stock one not the Ford Racing one in the pics) will be going with the motor. The rubber on the stock balancer has broke so you will need to get another balancer balanced to this rotating assembly. I just wanted to be upfront about this. This motor went 12.9 @106 in my 3450Lbs 1995 GT with a best trap of 108. Note: I will be taking the Timing cover off of the motor as I will be using it on my 408. Stock block .030 over for a 306 cu. in. Celvite Rod, Crank, and Cam bearings Stock crank (polished) Stock rods ROSS Forged flat top pistons (makes CR about 9.6:1) Blue printed oil pump Canton Bottom end Girdle with Main Studs Trickflow Stage one cam (221int/225ex, .499int/.510ex, 112 lsa) Edelbrock Performer 5.0 170cc aluminum heads w/ 1.90" intake valves, O-ring heads, 60cc chamber ARP head Studs Upgraded valve springs good to .600 lift Ford Racing 1.6 Roller Rockers Ford Racing Lifters New Waterpump @ rebuild Trickflow hardened Pushrods GT-40 ported lower intake Tubular GT-40 upper intake I would like to sell this complete for now, I will part it out if there is no interest. $2250 OBO ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0970.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0970.jpg) ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0971.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0971.jpg) ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0972.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0972.jpg) ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0979.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0979.jpg) ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0974.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0974.jpg) ![http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0975.jpg](http://i221.photobucket.com/albums/dd201/bikeboy587/IMG_0975.jpg) ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [December 10, 2009, 6:09am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/2 "2009-12-10T06:09:53Z")
bump ---
**Author:** ![slow84ta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slow84ta/32/7265_2.png) [@slow84ta](https://forums.speedlife.net/u/slow84ta)\ **Post date:** [December 10, 2009, 6:42am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/3 "2009-12-10T06:42:14Z")
seems like a decent deal, good luck with the sale. Seems like a good motor you throw a little boost at. ---
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [December 10, 2009, 6:45am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/4 "2009-12-10T06:45:53Z")
I’d love to put this in my Crown Victoria! GLWTS ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 1, 2010, 1:56pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/5 "2010-01-01T13:56:31Z")
ttt ---
**Author:** ![9c1ny](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/9c1ny/32/5050_2.png) [@9c1ny](https://forums.speedlife.net/u/9c1ny)\ **Post date:** [January 1, 2010, 2:16pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/6 "2010-01-01T14:16:19Z")
how would this stack up with say a stock LS1?? lol GLWS! ---
**Author:** ![larryr50](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/larryr50/32/5056_2.png) [@larryr50](https://forums.speedlife.net/u/larryr50)\ **Post date:** [January 1, 2010, 5:08pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/7 "2010-01-01T17:08:32Z")
free bump for a solid looking motor :tup:. glws. ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 1, 2010, 10:41pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/8 "2010-01-01T22:41:30Z")
> [@9c1ny](#): > > how would this stack up with say a stock LS1?? lol GLWS! Beats stock ls1s in my car. Would do even better in a light fox ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 6, 2010, 11:33am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/9 "2010-01-06T11:33:47Z")
bump willing to part out! ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 7, 2010, 11:14am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/10 "2010-01-07T11:14:28Z")
cam sold ---
**Author:** ![jt76](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jt76/32/5100_2.png) [@jt76](https://forums.speedlife.net/u/jt76)\ **Post date:** [January 7, 2010, 11:44am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/11 "2010-01-07T11:44:48Z")
someone inquired about this on wnyfbody in your thread, i believe yesterday unsure if you saw it or not, stuff gets bumped down all the time in that section. ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 7, 2010, 12:21pm UTC](https://forums.speedlife.net/t/h-c-i-306/76681/12 "2010-01-07T12:21:08Z")
i did get an email about that ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 11, 2010, 5:14am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/13 "2010-01-11T05:14:24Z")
ttt ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 19, 2010, 6:06am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/14 "2010-01-19T06:06:39Z")
bump, motivated to sell! ---
**Author:** ![rubbersiidedown](https://avatars.discourse-cdn.com/v4/letter/r/e19adc/32.png) [@rubbersiidedown](https://forums.speedlife.net/u/rubbersiidedown)\ **Post date:** [January 23, 2010, 10:12am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/15 "2010-01-23T10:12:13Z")
How much for the shortblock ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 23, 2010, 10:28am UTC](https://forums.speedlife.net/t/h-c-i-306/76681/16 "2010-01-23T10:28:31Z")
$400, includes shortblock with no cam, pan, oil pump, flywheel, and broken balancer. as described in the ad it needs to be re-balanced