# Haltech tuners

**URL:** <https://forums.speedlife.net/t/haltech-tuners/195693>\
**Category:** PittSpeed Automotive\
**Created:** [February 23, 2008, 2:08pm UTC](https://forums.speedlife.net/t/haltech-tuners/195693 "2008-02-23T14:08:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![claymanSRT](https://avatars.discourse-cdn.com/v4/letter/c/49beb7/32.png) [@claymanSRT](https://forums.speedlife.net/u/claymanSRT)\
**Post date:** [February 23, 2008, 2:08pm UTC](https://forums.speedlife.net/t/haltech-tuners/195693/1 "2008-02-23T14:08:54Z")

</div>

Umm ya, pretty much what the title is, Anybody know a shop/ramdom person experienced tuning a Haltech e8? its on a Sr20det.

---

<div class="post-metadata">

**Author:** ![yamaha](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamaha/32/5929_2.png) [@yamaha](https://forums.speedlife.net/u/yamaha)\
**Post date:** [February 23, 2008, 6:25pm UTC](https://forums.speedlife.net/t/haltech-tuners/195693/2 "2008-02-23T18:25:19Z")

</div>

I’ve used it before, what do you need to know?

---

<div class="post-metadata">

**Author:** ![claymanSRT](https://avatars.discourse-cdn.com/v4/letter/c/49beb7/32.png) [@claymanSRT](https://forums.speedlife.net/u/claymanSRT)\
**Post date:** [February 24, 2008, 6:32pm UTC](https://forums.speedlife.net/t/haltech-tuners/195693/3 "2008-02-24T18:32:50Z")

</div>

> [@Picture of my car.](https://forums.speedlife.net/t/picture-of-my-car/35085/13):
>
> I’ve used it before, what do you need to know?

ummm simply put…everything…haha

My tuning knowledge doesn’t go far from a safc or pre tuned ecu’s. I was looking for someone who would sorta of hold my hand, in a non gay way…haha

---

<div class="post-metadata">

**Author:** ![Rally\_WRX](https://avatars.discourse-cdn.com/v4/letter/r/94ad74/32.png) [@Rally\_WRX](https://forums.speedlife.net/u/Rally_WRX)\
**Post date:** [March 5, 2008, 3:08pm UTC](https://forums.speedlife.net/t/haltech-tuners/195693/4 "2008-03-05T15:08:57Z")

</div>

I’ve WOT tuned a haltech attached to a Datsun 280Z on a stock block and bigger turbo. It ended up trapping about 120-122 on 114 (pump octane) and about the same on 93 + methanol.

The interface I used was old school DOS with a blue background and yellow foreground. I’m certainly not the most knowledgeable person with it, but better than average. Good luck!