# Head decking/milling **URL:** \ **Category:** Shift518 Automotive\ **Created:** [June 17, 2013, 12:32pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236 "2013-06-17T12:32:29Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![capitalcrew](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@capitalcrew](https://forums.speedlife.net/u/capitalcrew)\ **Post date:** [June 17, 2013, 12:32pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/1 "2013-06-17T12:32:29Z")
I need a head milled and i just read some bad reviews on napa on wolf road. Anyone have any other suggestions? Looking to bring it this afternoon so quick replies would be great, thanks ---
**Author:** ![ds50r](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ds50r/32/3491_2.png) [@ds50r](https://forums.speedlife.net/u/ds50r)\ **Post date:** [June 17, 2013, 12:35pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/2 "2013-06-17T12:35:22Z")
normally id recommend hunts in Schenectady… i mean i still do they do amazing work just last few times ive recommended people there they had issues with the counter guy but the work was 100%… so if you dont mind a bit of attitude id bring it there also make sure you tell them not to sand blast the parts whre the seals for the cams sit… ive personally had 3 heads that would leak oil from the cam seals because the surface where the seal sits was sandblasted ---
**Author:** ![JSEnclosures](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsenclosures/32/6678_2.png) [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)\ **Post date:** [June 17, 2013, 12:41pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/3 "2013-06-17T12:41:08Z")
i just some machine shop in latham for a flywheel not too long ago, good work cannot remember the name tho. it’s close to rt.9 and 7 intersection ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [June 17, 2013, 12:42pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/4 "2013-06-17T12:42:00Z")
Clifton Park Engine rebuilders behind Napa on route 9 in CP. Napa fucked up a set of polished heads I had by sandblasting them for no apparent reason. ---
**Author:** ![capitalcrew](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@capitalcrew](https://forums.speedlife.net/u/capitalcrew)\ **Post date:** [June 17, 2013, 12:56pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/5 "2013-06-17T12:56:14Z")
Goin there thanks paul ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 17, 2013, 2:05pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/6 "2013-06-17T14:05:14Z")
Rick at c.p engine is who I used all along till I met Steve stack at xclr8 ---
**Author:** ![capitalcrew](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@capitalcrew](https://forums.speedlife.net/u/capitalcrew)\ **Post date:** [June 17, 2013, 2:17pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/7 "2013-06-17T14:17:29Z")
Cool, dropped it off there about an hour ago ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [June 17, 2013, 4:21pm UTC](https://forums.speedlife.net/t/head-decking-milling/267236/8 "2013-06-17T16:21:51Z")
Rick did the Windsor Sr. heads I had on my shitbox and did a good job at a reasonable price.