# Head Gasket, 2001 Xterra V6 **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [December 13, 2006, 12:06pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594 "2006-12-13T12:06:47Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [December 13, 2006, 12:06pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/1 "2006-12-13T12:06:47Z")
Anyone ever done one of these before? A co-worker needs it done on his truck, got a quote for a grand and was asking me if it seemed right. Shop was quoting somewhere around 12-13 hours, which seems like an awful lot for an experienced mechanic. Not sure if there is anything special on an Xterra though. ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [December 13, 2006, 12:11pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/2 "2006-12-13T12:11:19Z")
hmmmm…it not horrible…its a chain driven motor i believe so there is a lil more work with the timing case when taking the head off…it is a good 2 work day job… EDIT… I take that back…its belt driven so its not as bad…1k is too high…being belt driven its not too bad…but still some work…not 1k worth though looking at teh service manual its doesnt seem like it would be a horrible job ---
**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\ **Post date:** [December 13, 2006, 12:53pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/3 "2006-12-13T12:53:12Z")
xterras are pretty bare under the hood, i have one. its not tight at all. i think its a bs number, but i think all shops charge a lot for that kind of work. maybe don can give him a better price? ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [December 13, 2006, 12:59pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/4 "2006-12-13T12:59:16Z")
u got understand shops also send heads out to get them check there usually 80 bucks a head. there prolly also inclusing a coolant exchange thermostat timing belt and oil change ---
**Author:** ![fairgentleman\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fairgentleman_z/32/7263_2.png) [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)\ **Post date:** [December 13, 2006, 1:03pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/5 "2006-12-13T13:03:11Z")
> [@MaximaSE98](#): > > chain vs belt What’s so much more difficult about chains? I prefer chains myself. ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [December 13, 2006, 1:11pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/6 "2006-12-13T13:11:28Z")
Supercharged or not. 12.7 without supercharger. That is what the book calls for. ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [December 13, 2006, 1:18pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/7 "2006-12-13T13:18:33Z")
12.7 \* 75/hr = $952 labor. Sounds about right. edit- Experienced mechanic or not, they should do the job by book rate. Unless it’s a friend. Otherwise, Your friend can pay 15 hours of labor for a 13 hour job… for example. ---
**Author:** ![Fry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fry/32/7284_2.png) [@Fry](https://forums.speedlife.net/u/Fry)\ **Post date:** [December 13, 2006, 1:23pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/8 "2006-12-13T13:23:23Z")
Wow, I’m shocked that it has a belt. I thought nissan stopped using belts across the board in 1990. ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [December 13, 2006, 1:23pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/9 "2006-12-13T13:23:43Z")
> [@fairgentleman Z](#): > > What’s so much more difficult about chains? I prefer chains myself. belts require less tear down…there is no sealed case to take off with a belt…the chain motors u have to take the entire cover off…generally the belts IMO are a lil easier to disassble…but i like chains better though… i also thought Nissan had completely switched over to belts late 90s until I looked up timing kit on [Courtesyparts.com](http://Courtesyparts.com) and its a belt ---
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [December 13, 2006, 1:24pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/10 "2006-12-13T13:24:45Z")
Sounds good guys. Guess a head gasket takes a bit longer than I thought. Probably because I just throw shit back together any which way and just hide the extra parts I always end up with. :snky: ---
**Author:** ![fairgentleman\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fairgentleman_z/32/7263_2.png) [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)\ **Post date:** [December 13, 2006, 1:36pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/11 "2006-12-13T13:36:14Z")
> [@MaximaSE98](#): > > belts require less tear down…there is no sealed case to take off with a belt…but i like chains better though…less maintaince yeah, yeah, I was thinking of I-4s where in my case it isn’t much work. ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [December 13, 2006, 1:40pm UTC](https://forums.speedlife.net/t/head-gasket-2001-xterra-v6/21594/12 "2006-12-13T13:40:03Z")
Yea…i have to help Venompwr do a head gasket on this maxima and that aint gonna be fun