# Heat Wrap
**URL:** https://forums.speedlife.net/t/heat-wrap/170904
**Category:** PittSpeed Off Topic
**Created:** [December 6, 2004, 7:13pm UTC](https://forums.speedlife.net/t/heat-wrap/170904 "2004-12-06T19:13:24Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 6, 2004, 7:13pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/1 "2004-12-06T19:13:24Z")
Is there any reason NOT to put heat wrap on all the wires/wire looms that are anywhere near the headers? I’m going to zip tie everything that needs to be, but I figure this is extra insurance.
I was going to use Cool-Tape (metallic stuff) or something like it. Any opinions?
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 6, 2004, 7:37pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/2 "2004-12-06T19:37:43Z")
is the heat wrap re-usable?
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [December 6, 2004, 11:08pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/3 "2004-12-06T23:08:02Z")
> [@Jeff95TA](#):
>
> heat shink
fixed,
heat wrap :kekegay:
FiXED: Im a FUCKTARD.
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [December 6, 2004, 11:09pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/4 "2004-12-06T23:09:33Z")
woops, you meant the heat wrap as in for headers, my bad :doh:
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 6, 2004, 11:12pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/5 "2004-12-06T23:12:38Z")
fixed
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [December 6, 2004, 11:13pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/6 "2004-12-06T23:13:49Z")
hey shag! :booty:
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 7, 2004, 2:36am UTC](https://forums.speedlife.net/t/heat-wrap/170904/7 "2004-12-07T02:36:32Z")
> [@SHAG](#):
>
> is the heat wrap re-usable?
Not sure. Some of it is adhesive, so probably not.
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 7, 2004, 4:15am UTC](https://forums.speedlife.net/t/heat-wrap/170904/8 "2004-12-07T04:15:50Z")
just make sure ur crusie control wire doesnt fall out of the wire loom like mine did and rest agianst the header!!!
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 7, 2004, 4:23am UTC](https://forums.speedlife.net/t/heat-wrap/170904/9 "2004-12-07T04:23:41Z")
if ur using aftermarket wires,dont worry about it!just make sure ur pinky finger fits between the wire & header tube etc!
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 7, 2004, 8:27am UTC](https://forums.speedlife.net/t/heat-wrap/170904/10 "2004-12-07T08:27:55Z")
> [@8.1crew](#):
>
> if ur using aftermarket wires,dont worry about it!just make sure ur pinky finger fits between the wire & header tube etc!
I’ll make sure to finger it.
---
### Author:  [@99CobraSC](https://forums.speedlife.net/u/99CobraSC)
#### Post date: [December 7, 2004, 4:52pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/11 "2004-12-07T16:52:00Z")
I just heat wraped my headers and i was done with it on mine… But i did my headers while they where off. It keeps it so much cooler under the hood.
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 7, 2004, 5:47pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/12 "2004-12-07T17:47:59Z")
> [@Burgh89GT](#):
>
> I just heat wraped my headers and i was done with it on mine… But i did my headers while they where off. It keeps it so much cooler under the hood.
Doesn’t that void the warranty?
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 7, 2004, 6:03pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/13 "2004-12-07T18:03:57Z")
dont need wrap if jet coated!
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 7, 2004, 6:37pm UTC](https://forums.speedlife.net/t/heat-wrap/170904/14 "2004-12-07T18:37:16Z")
I decided just to wrap a few things that are close, like the O2 sensor and a few wire looms. $18 is cheap insurance.
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 8, 2004, 4:29am UTC](https://forums.speedlife.net/t/heat-wrap/170904/15 "2004-12-08T04:29:39Z")
> [@Jeff95TA](#):
>
> I decided just to wrap a few things that are close, like the O2 sensor and a few wire looms. $18 is cheap insurance.
correct!
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 8, 2004, 4:40am UTC](https://forums.speedlife.net/t/heat-wrap/170904/16 "2004-12-08T04:40:05Z")
i heat wraped soem things…but not my o2’s…didnt think they would need it b/c the deal with the hot exhaust all the time???
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 8, 2004, 8:34am UTC](https://forums.speedlife.net/t/heat-wrap/170904/17 "2004-12-08T08:34:38Z")
> [@95greenZ](#):
>
> i heat wraped soem things…but not my o2’s…didnt think they would need it b/c the deal with the hot exhaust all the time???
I meant the O2 wire. The headers moved it back further so the connector won’t clip to the block where it’s supposed to, which moves the wire closer to the header. But at least I didn’t have to buy an extension.
---
### Author:  [@oneslowbowtie](https://forums.speedlife.net/u/oneslowbowtie)
#### Post date: [December 8, 2004, 8:48am UTC](https://forums.speedlife.net/t/heat-wrap/170904/18 "2004-12-08T08:48:05Z")
> [@Jeff95TA](#):
>
> I meant the O2 wire. The headers moved it back further so the connector won’t clip to the block where it’s supposed to, which moves the wire closer to the header. But at least I didn’t have to buy an extension.
How did you manage not getting the extentions. . On my 94 I have to buy extentions. The drivers side works but to tight on the wires and the pass. side there is no way… :dunno:
---
### Author:  [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)
#### Post date: [December 8, 2004, 8:59am UTC](https://forums.speedlife.net/t/heat-wrap/170904/19 "2004-12-08T08:59:23Z")
ya i got the extentions too…works fine…and they r def. out of the way
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 8, 2004, 9:15am UTC](https://forums.speedlife.net/t/heat-wrap/170904/20 "2004-12-08T09:15:03Z")
you can always just extend the wires yourself
[Next page](https://forums.speedlife.net/t/heat-wrap/170904.md?page=2)