# Heater Core Lines

**URL:** https://forums.speedlife.net/t/heater-core-lines/124610
**Category:** SON240sx Automotive
**Created:** [May 19, 2009, 2:28pm UTC](https://forums.speedlife.net/t/heater-core-lines/124610 "2009-05-19T14:28:46Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [May 19, 2009, 2:28pm UTC](https://forums.speedlife.net/t/heater-core-lines/124610/1 "2009-05-19T14:28:46Z")

</div>

My lower heater core line has started to leak but its been 4yrs now since I put the SR20 in and I don’t remember where I got the piece from. In the end, I just used misc pieces that were laying around after I took the KA out so I’m not sure if this piece is the same or actually the lower core line on the KA24 etc…

 ![http://img.photobucket.com/albums/v508/Jedi_Car_Fan/My%20Car/100_2388.jpg](http://img.photobucket.com/albums/v508/Jedi_Car_Fan/My%20Car/100_2388.jpg)

Picture is not the best but its the line under the intake manifold that goes into the bottom hole on the fire wall. Its got a bit of an offset to it but I’m guessing it is no longer then 6’’ ?

I was going to try a piece of flexible line but was not sure if it would kink or not due to the offset so I was curious what others have done for this line or whether the lower line from the KA24DE is the same ?

Kind Regards,

Jeff.

---

<div class="post-metadata">

### Author: ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [May 19, 2009, 5:30pm UTC](https://forums.speedlife.net/t/heater-core-lines/124610/2 "2009-05-19T17:30:18Z")

</div>

Nevermind… Got the Gates 19606 hose or whatever and got it fixed up!