# Help! Broken brake lines.

**URL:** <https://forums.speedlife.net/t/help-broken-brake-lines/206735>\
**Category:** SON240sx Automotive\
**Created:** [December 1, 2010, 12:27pm UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735 "2010-12-01T12:27:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![matthewto](https://avatars.discourse-cdn.com/v4/letter/m/c6cbf5/32.png) [@matthewto](https://forums.speedlife.net/u/matthewto)\
**Post date:** [December 1, 2010, 12:27pm UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735/1 "2010-12-01T12:27:41Z")

</div>

So I was trying to replace my brake hoses today and I accidently broke the brake line to the LR caliper while i was trying to loosen the brake hose.

anyone know if I can repair the line or if I’m just going to have to replace it and if I do have to replace the line is it a difficult job?

---

<div class="post-metadata">

**Author:** ![nate10](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nate10/32/5723_2.png) [@nate10](https://forums.speedlife.net/u/nate10)\
**Post date:** [December 1, 2010, 1:23pm UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735/2 "2010-12-01T13:23:56Z")

</div>

You can just do a quick fix and repair the broken section, but if there is any other rusty sections of the line, which I’m sure there probably is, your best bet is to just do it right once and replace the entire line, it isn’t all that hard just time consuming if u want it to look somewhat oem.

Nate

---

<div class="post-metadata">

**Author:** ![matthewto](https://avatars.discourse-cdn.com/v4/letter/m/c6cbf5/32.png) [@matthewto](https://forums.speedlife.net/u/matthewto)\
**Post date:** [December 1, 2010, 1:43pm UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735/3 "2010-12-01T13:43:21Z")

</div>

do you know around how much it’ll cost to replace the entire line?

---

<div class="post-metadata">

**Author:** ![braden](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/braden/32/5757_2.png) [@braden](https://forums.speedlife.net/u/braden)\
**Post date:** [December 1, 2010, 3:01pm UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735/4 "2010-12-01T15:01:38Z")

</div>

not that bad…go to an auto parts store and get a brake line some fittings and rent a flaring kit its pretty easy to do …just figure out how much you need bend it to fit and flare it with the right fitting

---

<div class="post-metadata">

**Author:** ![\_kris](https://avatars.discourse-cdn.com/v4/letter/_/858c86/32.png) [@\_kris](https://forums.speedlife.net/u/_kris)\
**Post date:** [December 2, 2010, 7:27am UTC](https://forums.speedlife.net/t/help-broken-brake-lines/206735/5 "2010-12-02T07:27:41Z")

</div>

get a new s14, you dirty rich kid