# Help.... honda floor pan **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [January 3, 2008, 6:53am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141 "2008-01-03T06:53:17Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![93gspeccivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/93gspeccivic/32/5137_2.png) [@93gspeccivic](https://forums.speedlife.net/u/93gspeccivic)\ **Post date:** [January 3, 2008, 6:53am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/1 "2008-01-03T06:53:17Z")
i just pulled the carpet out of my sol, floor pan looks like it just has a good amount of surface rust but when i removed the driver seat everything got worse. The the holes in the floor pan where you bolt the seats down are rusted out and new holes are drilled right threw so you can see day light on the other side. the hardware used surely wasnt ment for a collision and im thinking about scrapping this shell if there isnt a fix for this. ---
**Author:** ![sureshot007](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sureshot007/32/7345_2.png) [@sureshot007](https://forums.speedlife.net/u/sureshot007)\ **Post date:** [January 3, 2008, 7:02am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/2 "2008-01-03T07:02:04Z")
Sheet metal. Weld in a new floor pan and you are all set. ---
**Author:** ![93gspeccivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/93gspeccivic/32/5137_2.png) [@93gspeccivic](https://forums.speedlife.net/u/93gspeccivic)\ **Post date:** [January 3, 2008, 9:53am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/3 "2008-01-03T09:53:35Z")
what about seat mounts ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [January 3, 2008, 9:57am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/4 "2008-01-03T09:57:01Z")
maybe find a del sol shell in the junkyard or something and cut out the floor pans if they’re in good shape and then weld them in ---
**Author:** ![93gspeccivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/93gspeccivic/32/5137_2.png) [@93gspeccivic](https://forums.speedlife.net/u/93gspeccivic)\ **Post date:** [February 1, 2008, 10:25pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/5 "2008-02-01T22:25:13Z")
i could use any civic’s floor pan. where could i go around here to get in welded in, seeing as i dont know effective welds to hold a floor pan in and dont have axcess to the materials? ---
**Author:** ![ly555is](https://avatars.discourse-cdn.com/v4/letter/l/3bc359/32.png) [@ly555is](https://forums.speedlife.net/u/ly555is)\ **Post date:** [February 1, 2008, 10:29pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/6 "2008-02-01T22:29:10Z")
whatever you do after this i do mean whatever get rustop done. schmidt’s on sheridan is one place, there are several more. do not let this happen to you again in a DD that you drive up north again ---
**Author:** ![AKA-FERRARI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aka-ferrari/32/7260_2.png) [@AKA-FERRARI](https://forums.speedlife.net/u/AKA-FERRARI)\ **Post date:** [February 1, 2008, 10:36pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/7 "2008-02-01T22:36:16Z")
oh…the sorry sores of living in buffalo…:nono: it’s gonna cost ya ---
**Author:** ![cky89](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cky89/32/4945_2.png) [@cky89](https://forums.speedlife.net/u/cky89)\ **Post date:** [February 2, 2008, 12:28am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/8 "2008-02-02T00:28:55Z")
I helped weld in a whole new floor and fire wall in a 72 cutlass, fun times. Good luck. ---
**Author:** ![Jim1234664](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jim1234664/32/7438_2.png) [@Jim1234664](https://forums.speedlife.net/u/Jim1234664)\ **Post date:** [February 2, 2008, 3:40am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/9 "2008-02-02T03:40:43Z")
> [@ly555is](#): > > whatever you do after this > > i do mean whatever > > get rustop done. schmidt’s on sheridan is one place, there are several more. do not let this happen to you again in a DD that you drive up north again he didn’t let this happen to himself. he trusted a long standing board member who sold him this car and never mentioned the rotted floor pan and an extremely unsafe rigged up seat mount. And I know what everyones going to say “its your responsibility to check it out before you buy” ect. When it comes down to it though he really should have mentioned it in the ad or at least in person as it is a serious safety related problem that is going to require alot of effort to fix. ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [February 2, 2008, 8:26am UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/10 "2008-02-02T08:26:21Z")
get a can of POR-15 and paint over the existing floor boards. Then get replacement floor pans or sheet metal and weld in new. paint them with POR-15. replace carpet. ---
**Author:** ![LXIFLYBY](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lxiflyby/32/7399_2.png) [@LXIFLYBY](https://forums.speedlife.net/u/LXIFLYBY)\ **Post date:** [February 5, 2008, 8:37pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/11 "2008-02-05T20:37:38Z")
if you cant do that, then you can drill out the spotwelds on the pieces for the seat mounts, take them off the floor, fix the floor with new sheetmetal or another floor, fix the seat mounts and weld them back on. Do you have a pic of how bad they are? ---
**Author:** ![93gspeccivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/93gspeccivic/32/5137_2.png) [@93gspeccivic](https://forums.speedlife.net/u/93gspeccivic)\ **Post date:** [February 25, 2008, 12:51pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/12 "2008-02-25T12:51:03Z")
ok spring is right around the corner and i need this done, but with the rest of my build and school i wont have the time. where is a good place around here to get this work done ( having my floor pan cut out and a new one welded in) ---
**Author:** ![suzukiriderman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suzukiriderman/32/7421_2.png) [@suzukiriderman](https://forums.speedlife.net/u/suzukiriderman)\ **Post date:** [February 25, 2008, 2:35pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/13 "2008-02-25T14:35:05Z")
Muscle Car Alley on 5960 Seneca St in Elma. 675-2400 I deal with them all the time. Tell Tom Jesse sent you. ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [February 25, 2008, 3:12pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/14 "2008-02-25T15:12:26Z")
is it tell tom that jesse sent him, or tell them tom jesse (you) sent him? ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [February 25, 2008, 6:54pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/15 "2008-02-25T18:54:16Z")
> [@suzukiriderman](#): > > Muscle Car Alley on 5960 Seneca St in Elma. 675-2400 I deal with them all the time. Tell Tom Jesse sent you. excellent place :tup: ---
**Author:** ![93gspeccivic](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/93gspeccivic/32/5137_2.png) [@93gspeccivic](https://forums.speedlife.net/u/93gspeccivic)\ **Post date:** [February 25, 2008, 8:14pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/16 "2008-02-25T20:14:43Z")
allright thanks alot guys ---
**Author:** ![suzukiriderman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suzukiriderman/32/7421_2.png) [@suzukiriderman](https://forums.speedlife.net/u/suzukiriderman)\ **Post date:** [February 25, 2008, 9:19pm UTC](https://forums.speedlife.net/t/help-honda-floor-pan/41141/17 "2008-02-25T21:19:17Z")
> [@ieatpaint315](#): > > is it tell tom that jesse sent him, or tell them tom jesse (you) sent him? Talk to Tom, tell him Jesse sent you.