# Help!! need axle NUT

**URL:** <https://forums.speedlife.net/t/help-need-axle-nut/127620>\
**Category:** SON240sx Automotive\
**Created:** [August 30, 2009, 9:02pm UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620 "2009-08-30T21:02:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![chineybutu](https://avatars.discourse-cdn.com/v4/letter/c/e47774/32.png) [@chineybutu](https://forums.speedlife.net/u/chineybutu)\
**Post date:** [August 30, 2009, 9:02pm UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620/1 "2009-08-30T21:02:19Z")

</div>

Long Story… In a nutshell  
I got a vsld and 5bolts output shafts, Finaly got around to installing it.  
finally got out my Open Diff and took out the 6bolt output shafts.  
I install the 5bolt output shaft and install my Vsld, in the process of putting everything back together again, My axel nut does not Fit the 5bolt output shafts.

So Question is? where do i buy a new Axel Nut? or get one. Nissan Dealer?  
Plus what kind of axel shafts do i say they came off of?

Thanks

---

<div class="post-metadata">

**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\
**Post date:** [August 31, 2009, 12:05am UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620/2 "2009-08-31T00:05:06Z")

</div>

So strange. I was told by Avery, whom I bought it from, that it was from an JDM S13. Believable by it’s cleanliness. The nut should be the same… Is the thread pitch different or just doesn’t fit at all?

I sent you a text back.

---

<div class="post-metadata">

**Author:** ![chineybutu](https://avatars.discourse-cdn.com/v4/letter/c/e47774/32.png) [@chineybutu](https://forums.speedlife.net/u/chineybutu)\
**Post date:** [August 31, 2009, 6:21am UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620/3 "2009-08-31T06:21:04Z")

</div>

i text you back, but it kept on failing.  
i believe the pitch may be off.  
one nut barely goes on, and the other does not.

---

<div class="post-metadata">

**Author:** ![chineybutu](https://avatars.discourse-cdn.com/v4/letter/c/e47774/32.png) [@chineybutu](https://forums.speedlife.net/u/chineybutu)\
**Post date:** [August 31, 2009, 10:23am UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620/4 "2009-08-31T10:23:14Z")

</div>

Carried the shafts to a cv joint place nd they say it is bent from them banging to get it out  
so I gotta get them rebuilt

---

<div class="post-metadata">

**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\
**Post date:** [August 31, 2009, 11:46pm UTC](https://forums.speedlife.net/t/help-need-axle-nut/127620/5 "2009-08-31T23:46:32Z")

</div>

Did u try the machine shop?