# Help with -10an fittin.

**URL:** <https://forums.speedlife.net/t/help-with-10an-fittin/141651>\
**Category:** Canada Nissan Automotive\
**Created:** [February 28, 2006, 4:58pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651 "2006-02-28T16:58:05Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![gorillam](https://avatars.discourse-cdn.com/v4/letter/g/f14d63/32.png) [@gorillam](https://forums.speedlife.net/u/gorillam)\
**Post date:** [February 28, 2006, 4:58pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/1 "2006-02-28T16:58:05Z")

</div>

I offically say f\*\*\* u to my -10 braided steel host and fittings. I got one end on fine and used up about 6" excess trying to install the other end and only have about half an inch of host left before it’s too short.

Is anyone real good at installing these earl I think fittings that wouldnt mind doing one for me for my s13.

I’m in calgary, thanks.

---

<div class="post-metadata">

**Author:** ![n1zm0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/n1zm0/32/3302_2.png) [@n1zm0](https://forums.speedlife.net/u/n1zm0)\
**Post date:** [February 28, 2006, 9:54pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/2 "2006-02-28T21:54:56Z")

</div>

why not buy ss lines?

---

<div class="post-metadata">

**Author:** ![gorillam](https://avatars.discourse-cdn.com/v4/letter/g/f14d63/32.png) [@gorillam](https://forums.speedlife.net/u/gorillam)\
**Post date:** [February 28, 2006, 10:25pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/3 "2006-02-28T22:25:40Z")

</div>

I went to mopac and they gave me these haha, yes i’m fairly annoyed at these pos lines.

They’ve been purchased and will work now I dont want to spend any more money and change the setup.

Thanks.

---

<div class="post-metadata">

**Author:** ![matt\_calgary](https://avatars.discourse-cdn.com/v4/letter/m/74df32/32.png) [@matt\_calgary](https://forums.speedlife.net/u/matt_calgary)\
**Post date:** [February 28, 2006, 10:27pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/4 "2006-02-28T22:27:29Z")

</div>

so you can’t get the fitting on the other end, the lines are too long/too short?

---

<div class="post-metadata">

**Author:** ![gorillam](https://avatars.discourse-cdn.com/v4/letter/g/f14d63/32.png) [@gorillam](https://forums.speedlife.net/u/gorillam)\
**Post date:** [March 1, 2006, 8:57am UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/5 "2006-03-01T08:57:06Z")

</div>

Yeah no I cant get one end of the fittings on, and I keep messing it up which means I dont have much more i can cut before it’s too short.

---

<div class="post-metadata">

**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\
**Post date:** [March 1, 2006, 5:35pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/6 "2006-03-01T17:35:04Z")

</div>

I have done quite a few - fittings. I can probably help you out. pm me with you info.

---

<div class="post-metadata">

**Author:** ![gorillam](https://avatars.discourse-cdn.com/v4/letter/g/f14d63/32.png) [@gorillam](https://forums.speedlife.net/u/gorillam)\
**Post date:** [March 1, 2006, 9:35pm UTC](https://forums.speedlife.net/t/help-with-10an-fittin/141651/7 "2006-03-01T21:35:48Z")

</div>

Thanks for the offer jason,

I ended up getting it today afterall, I didnt oil it haha. Helps if you know what you are doing.

Thanks again.